How To Remove A Stuck Bit From A Makita Impact Driver

Tools always seem to get stuck from time to time - but don't worry, we've got the solution. In this video, we'll show you how to remove a stuck bit from a Makita impact driver.
If you're stuck with a stuck bit, don't worry - we've got the solution. In this video, we'll show you how to remove a stuck bit from a Makita impact driver. After watching this video, you'll be able to free your toolkit from stuck bits with ease!

[@rachelmichaels2108]

Set my Makita torque drill aside over a year ago after giving up on getting a spade bit out. Fortunately the bit bit had a hole in the wide part so put a screw thru there and a washer holding the release open and…4 tries and it worked!! Thank you. Was gonna have to buy another for a job today.

[@LouieTheSmoker]

Hammer and screwdriver, worked like magic 💪🏻

[@azumkyo]

Thanks. It works for me. got my hex bit out ❤

[@papiringoreyyt9373]

Gracias me sirvió de mucho tu vídeo para desatorar una broca hexagonal

[@lynnefiora9800]

I had a small drill bit stuck. I put crc on it and even tho 2 different people tried getting it out it took 24 hours to soak the crc into it to get it out. I have more bought a smaller adapter bit so it might be a better option.

[@CaliforniaTravelVideos]

Mercifully at 2:44 we could then easily hear you when you spoke closer to the microphone. Before watching your video, I also started the same way using a channel lock, then WD-40. But when all else fails, why not extend and hold the chuck forward, then use the channel lock to temporarily grip and lock on the extended chuck? My Montana-brand bit shaft is much shorter than yours, making it difficult to use a hammer and screwdriver approach to help dislodge the frozen bit. Apparently the Montana brand impact bits have a very soft shank that easily freeze up in the Makita chuck, despite very light work - I only sunk a 1/4 inch diameter hole down 1 inch in a 2x4 piece of wood. Anyway, my next step after locking the chuck with the channel lock is try a second channel lock on the bit in close proximity to the first channel lock - and they use pry leverage at different angles. Geesh!

[@ambroseleung1222]

Thanks for the hammer tips , work for me , save me to buy a new one !😂 Much appreciated

[@rdy4trvl]

My bits no longer stay in the chuck....they fall right out. Any ideas about what may have gone wrong? I don't believe I'm missing any part. The collar doesn't seem to do anything at this point....the bit slides in/out regardless of the collar (pulled out or not).

[@evelinedumoulin-dutil4936]

Thank you so much!!!

[@brianschooley3833]

Use a zip tie. Will hold it also

[@tonchido]

Any time i put big one it stucks

[@sharkeyes]

Couldn't you just take the chuck off ?

[@brianfoley3104]

My son actually managed to put just the bit alone into the drill I can't get a grab on it as it's just the head of the bit sticking out send help.

[@TheBlokeCave]

Do you have any long nose pliers that you can grab onto it with?

[@brianfoley3104]

@@TheBlokeCave the tip off the bit is literally all I can grab just keeps slipping on anything I've tried...I really miss my impact gun🤣

[@lynnefiora9800]

@@brianfoley3104same here what was true outcome

[@callummackay9591]

@@brianfoley3104I got the same problem

[@TropTrevTv]

Same

[@jcc22ful]

👌👌

[@jonny1943]

Obviously the Makita quick chuck suuuuucks