How to remove BMW Mini Coooper front seats / airbag warning

How to remove BMW mini front seats and bypassing the seat airbag warning.

[@vitadakine]

Thanks to your videos I did some works on my mini by myself. Thank you. Great job!

[@carlosalves35]

Hi mate. Great video!!!. Can you do one that explains the dash please. Got my self one of these but need some help explaining some of the dash and buttons?

[@silas6583]

This is the exact information in looking for but your seats have a dofferent connector than mine do. Any chance you chould show me how this is done for the 2013 model? Its one big yellow connector instead of two small ones

[@foilhatters5132]

Unknowingly I took the front pass seat out ... and turned the ignition on. Gave me this same code. Fortunately I have a better scanner at work. I could go into the body control module and reset codes in the restraint system. I have a 2012 JCW hardtop

[@FranciscoSantos-ub6zl]

Hello, Can you help me with a doubt? I'm trynign to fix my release trims, how can I replace release trims for mini sport seats? Great job!

[@alexbrz2000]

My R60 has a main plug yellow, with 2 other smaller plugs. do you know how to do it ?

[@Apoplectic_Spock]

How did the new year's resolution work out for you? LOL Was it okay? 😉

[@NinaThomas1969]

Hello! I own a MINI Cooper -2002. I want to remove the airbag on the passanger side, or at least make the light go off as it´s constantly on. Can I just find the wire and pull it? Just like that?

[@djhatstand7312]

You should always disconnect the negative first, that way it wont spark when you reconnect or bridge a tool to ground and you also wont spike the sensitive electrics

[@Asimicrete]

Thank you again!

[@Nicolasc025]

hi, wich is the correct resistor? any special condition? i put a 3.9 ohm 1/4 watt with 5% tolerance and doesn't can you help me plis

[@filiberozavala1436]

I have a question where you can find a little fuse you connected to the cable

[@ellemeno0]

Why should you not go driving around like that? What would happen?

[@warwickdean]

And how to remove the recliner cable?

[@tigsemmett9167]

Did you have to use to remove the code. As I tried this and didn’t work. Any links for the resistor you brought?

[@Danyl830wazzup]

in my car I have the black connector what is that for?

[@irishali896]

Hi there, do you know what to do with the heated seat/ weight sensor? Any bypass kit online will only come with the bypass connectors for the seat belt pre tensioner, and the airbag. Thanks

[@deadzombiekilo]

Can you use a higher or lower ohm resistor? Say a 1.5 or a 3 ohm resistor?

[@L663]

I guess so - but not sure ...

[@LolGetAJob]

So I would solder the wires to each end of the resistor correct? Great vid thanks!

[@L663]

Hi This is correct

[@LolGetAJob]

powerfulukltd thank you again!

[@asolano8036]

It’s working on a 2012 Mini Cooper s ??????????

[@torgnyb4971]

Thanks guys, worked out well when changing seat. The Brandgarage wanted 1700 Euro to solve this and recomended me to scrap the car (Cooper 2001 in perfect condtion)... :-(

[@L663]

Cool - this is why i love the internet !

[@Crushercurtis702]

2..2 ohm red red gold gold on a 4 band is 2.2 ohm

[@djtoo7]

cooooool with this work on a R56 2007 mini S?

[@NathanKett]

Would this work to remove an existing airbag warning light for the seat airbag?

[@L663]

Yes adding the resistor - then you need to clear the stored fault

[@audreyr7484]

hello, unfortunally i removed the right front seat before disconnect the battery, now the airbag signal light is on, do you know if i have no other choice to go to my mini dealer? thank you

[@antoniogarcia7140]

@@audreyr7484 I did same, but how u reset it fault ?

[@ianfrench198]

Hi I have just tried this with the airbag seat and the and the airbag light will not go off have you got to do the tensioner as well

[@justincooper9488]

@@audreyr7484 hi did u ever find a fix for this?

[@erikg6905]

What error codes do you get with a bad seat belt tensioner

[@lrcx6888]

Hello Can you say me Value of this componant?

[@L663]

Yes i think it was 2 Ohm.

[@maxandre5213]

wo kann Ich diesen widerstand kaufen

[@1000RXR]

Merci ça a fonctionné sur ma mini one r50 j ai mis Les résistances par contre j ai passé la valise

[@stadixisnotagamer]

Ça me rassure, je vais tester sur la mienne du coup. Ça a marcher du premier coup ? Pourquoi tu l’a passer à la valise en plus ?

[@1000RXR]

stadixisnotagamer bahh écoute lorsque j ai mis les résistances ça ne s est pas éteint j ai passé la delphi et le défaut je l ai effacé

[@elodiedubois5119]

@@1000RXR Bonjour, pouvez vous me dire quelle résistance vous avez utilisé ?

[@1000RXR]

@@elodiedubois5119 je crois 2ohm

[@user-wg7nw3mh2e]

What year car is this?

[@ryanhobbs3362]

He said it was a 2003 (R50)

[@aboaliali7915]

Hi, 2 ohm resistor with ......watt ?

[@L663]

0.5watt or higher would be fine

[@aboaliali7915]

Hi,ive got 2.2 ohm with 0.6 watt , is this ok or should be like yours ?

[@L663]

you should be OK with that i recon.... but clearly i have not tested that so cant be sure 100%

[@aboaliali7915]

Thank you mate.

[@jasper7851]

@@L663 in your video i see a 3.2 ohm resistor. ? Oranje, red, gold.

[@Slazlo-Brovnik]

I would retrofit seats with airbags and tensioner if my MINI would not have them - I really don't get why people would take that out.

[@nasgamueds89]

Works wonders! Thank you for saving me money!

[@L663]

You're welcome!

[@VANESSASVANLIFEJOURNEY]

*great tips*

[@mfatihates]

Welche diode ist das ?

[@nicoznam]

2 ohm