How to remove front bumper on 2015 Kia Soul

[@richardterrell7539]

I just did the horn upgrade on my wife's 2016 soul, and you do NOT have to remove the headlights! Thanks for your good explaination of how to remove the bumper.

[@sen_pen0143]

Glad to help. . .

[@grailph]

My horns just gave out today and was looking around on what to expect for the bumper removal. This looks pretty straightforward. The manual says nothing about removing the headlights too. Btw, what horns did you replace them with? Thanks in advance.

[@RobertMount]

Instructions worked for my 2016 soul base. Only exception were the plastic screws on my car were the push in type and needed a flathead to carefully pop them open. With this video I was able to replace a broken section of my bumper in under two hours (not including painting time). Saved me hundreds of dollars over taking it to body shop. Thanks for making this video!

[@sen_pen0143]

Thanks, even if it's not the best video at least it gave you some idea on how to.

[@haroldsogard9813]

Many thanks for posting this Pinoy. It's totally clear and complete - gives me confidence I can do easily do this myself so I can then replace the wimpy horn on my new Soul EV!

[@kdw94780]

Thanks for the upload. My front bumper cover got smashed and now i know how to replace it without paying an arm and a leg. 👍

[@grailph]

Maraming salamat pre at malaking tulong itong video mo. Dahil dito napalitan ko ng maayos ung factory horns ng hella yellow twin trumpets.

[@simonjc9999]

Thanks for the good video! You helped save me some good money to replace the horn myself. I ended up not fully removing the bumper and was able to access the horn enough to remove and install the new.

[@McFlyGuitarsandStuff]

I've got two new horns to put in my Kia Soul but I don't want to take the front bumper off to do it. Even though I've done that kind of stuff a few times I just don't feel like it. If I could figure out what color code the wires were I'd splice them right behind the headlight and go from there

[@JustWasted3HoursHere]

I have a 2016 Kia Soul EV+ but I imagine the process is very similar. Just want to say also you have a very calming voice. You should do meditation videos.

[@johnmoyer2849]

Am going to add fog light to my 2018 soul.Thanks for your video

[@eldonrichardson9085]

Thanks for the video. The only recommendation I would make is to have a camera man to keep the video on what you are doing and not watching your back.. Again good video and it helps....

[@chrisntab]

You are the man1 To do instruction video, just cause to help others.. You the man!

[@belowmars]

11:30 you said "there's clip, you gotta take that off", did you mean 'un-clip' it or taking the clip off? I think you forgot to put back the screws behind the bumper in the splash guard area

[@belowmars]

If the car has fog lights, you gotta have an extra step to remove the fog lights first before the bumper right?

[@grailph]

Thanks for the video this really helped me set the expectation on when I'll do my horn replacement. They gave out today and was wondering what horns you have on yours. Thanks in advance.

[@sen_pen0143]

something like this, www.ebay.com/itm/Pair-12V-Super-Loud-Compact-Electric-Blast-Super-Tone-Hella-Horn-for-car-truck/192326334407?epid=26006601194&hash=item2cc78af7c7:g:KR0AAOSwrptbFKGG:rk:11:pf:0

[@joshuamouton3825]

It depends on the year of the soul the 1st gen you do have to take the headlights off

[@enor1sdca]

thanks for the vid... were you able to access the windshield res easily once the bumper was off?

[@jaidos01]

Greetings, I need the lanterns and bomper of the kia soul 2014, you can recommend a safe place in usa to buy it, I'm from Guatemala

[@Hudson-1947]

Thanks for posting this. :)

[@Tony-ev6bu]

You should do one with the fenders

[@brycedallmeyer7541]

Huge help!

[@MattGabe]

Do you need to take the bumper off to remove the unpainted plastic part on the front?

[@sen_pen0143]

it's all one piece

[@MattGabe]

www.kiapartsoutlet.com/oe-kia/86512b2000 The plastic piece is separate part, but it looks like you need to take the bumper off to get to it though.

[@sen_pen0143]

+Matt Gabe my bad it's 2 piece but in order for you to take the bottom off. you gotta take the whole bumper off.

[@MattGabe]

all good. thanks for the responses!

[@McFlyGuitarsandStuff]

If you knew what color wires the horn used you could just splice into the harness behind the headlight and put the horns in the grill where they'd be loudest.

[@sen_pen0143]

I think if you cover or block something in front the horn. It wouldn't be as loud if it is as in the front. From what I search if you add a horn relay it will be more louder.

[@rafaelalejandrodelvillarbr8506]

Thks Nice video

[@ahmedlazam6905]

good jop...very nice...thanks...

[@felixpillot2911]

You don't need to remove the lights. Watch more videos.

[@ronkey4796]

Good video without strident stupid background music!!!!!!!!!! +++plus

[@obssed]

Thank you!

[@sen_pen0143]

anytime. . . .

[@chrismain91]

In a white shirt your doing this?

[@Dastormcoming]

He said 2014 the title said 15, im just looking