Coleman CC100X: www.walmart.com/ip/Coleman-CC... Massimo MB100: amzn.to/3NgDbGK (Same as CC100X) Spring Kit: amzn.to/47Kp2di Socials: / discord / batahaaa
Пікірлер: 76
@jorgepost21642 жыл бұрын
Good idea thanks for the vid , very informational. I appreciate it mate
@cookiejoker97442 жыл бұрын
thank you so much man I've been trying to figure this out for weeks make sure I don't blow my engine up now 😂😂😂😂 but for real thank you so much sooooo simple too simple I can't believe I didn't think of it
@Bataha7 ай бұрын
No problem
@jacobquintana86783 жыл бұрын
Thanks a lot this helped
@Thiago-jw6op2 жыл бұрын
Can I always use without governor or will the motor blow up?
@yeahdatsju7113 жыл бұрын
Quick question how did Yu get the spring off?
@fnkeys4353 жыл бұрын
can you make a vid where you show where to put the spring
@Cornfed__3 жыл бұрын
My guy he replaced the spring with a smaller one. If u see the spring on yours that's where it goes
@25falcons Жыл бұрын
can i leave the spring and not touch it?
@poker3456112 ай бұрын
That has nothing to do with the governor. What you did was bend back the throttle stop screw and remove the throttle return spring. You can bypass the governor by removing the linkage to the carbonator (linkage originally hooks up to the governor) and make a longer linkage out of coat hanger wire that goes to the throttle lever. My coleman goes 32mph after the bypass. The governor is actually a plastic sprocket inside the engine.
@Bataha2 ай бұрын
You are correct sir. In this video I ACTUALLY removed the governor gear. kzbin.info/www/bejne/o5fPdIOpnaqnps0 Let me know what you think
@almighty_snkrs27973 жыл бұрын
Im thinking about getting this for my birthday i just got a motorized bike but it is very difficult to start so i am going to sell that and get this thanks
@cyguillory94552 жыл бұрын
Y’all don’t need new springs. Once your move that screw it allows you to full throttle. A new spring ain’t gonna do nothing.
@Hesham2008A2 жыл бұрын
Yes it does 🤦♂️ without a spring or with one but smaller does a big difference
@Bataha7 ай бұрын
You don't have to do anything with the spring but it won't let you fully open and binds up. I'd rather not have the throttle get stuck open that's why I got rid of the spring and put another one on that bolt. Looking back on it I should have put a small one where the stock one was.
@tasty_toast_yt2272 жыл бұрын
Can I take the spring of
@flypro66453 жыл бұрын
Does the speed improve by just bending the screw and not messing with the spring?
@cyguillory94552 жыл бұрын
Yes don’t mess with the spring. Because once you move that screw it allows you to full throttle so a spring I just waisting your time.
@Hesham2008A2 жыл бұрын
@@cyguillory9455 removing that spring does a big difference
@Fc2x Жыл бұрын
@No one likes you 😈 I might be wrong but isn’t their like a plastic gear connected to the governor inside the motor
@Bataha7 ай бұрын
You don't have to do anything with the spring but it won't let you fully open and binds up. I'd rather not have the throttle get stuck open that's why I got rid of the spring and put another one on that bolt. Looking back on it I should have put a small one where the stock one was.
@fnkeys4353 жыл бұрын
can you make a re-make vid to show where to put the spring?
@nickkuczynski73203 жыл бұрын
He put in one the governor bolt that he bent out
@trevinskiking21653 жыл бұрын
It's not Rocket Science, it's just a throttle return spring,have a feel around but don't ride without one.Trev New Zealand
@Hesham2008A2 жыл бұрын
@@nickkuczynski7320 why would he have put it there 😂
@jackonick3 жыл бұрын
what happens if you remove the governor and take the spring out and don't replace it?
@Bataha3 жыл бұрын
It should be fine just might not spring shut when you let off throttle.
@jackonick3 жыл бұрын
@@Bataha thanks :)
@jackonick3 жыл бұрын
@@Bataha I removed the governor just like you did in the video with the spring and everything and it goes waaayyyy faster
@trevinskiking21653 жыл бұрын
@@jackonick Then bang or seized Conrod etc
@anthonybranchflower43083 жыл бұрын
Anyone find out what size nut fits on that bolt ? To prevent spring from coming off
@Bataha3 жыл бұрын
I haven’t, the spring hasn’t come off for me yet.
@braxton20073 жыл бұрын
just put electrical tape on the end of the screw to hold it on
@BenHLee3 жыл бұрын
Couldn’t really tell how you put the new spring on. Did you run the new spring around the governor screw you bent up?
@Bataha3 жыл бұрын
Yeah that’s exactly what I did. It helped out a lot.
@anthonybranchflower43083 жыл бұрын
Anyway to get a better look on how to put the other spring on
@Bataha3 жыл бұрын
it just runs from the end of the throttle linkage hooked in the hole to the bent screw.
@anthonybranchflower43083 жыл бұрын
Also, when you first got it , did a little alike come out from where the choke area is ? Yes there’s oil in and it’s new
@anthonybranchflower43083 жыл бұрын
Smoke*
@Bataha3 жыл бұрын
@@anthonybranchflower4308 Mine didn’t have any from the choke area check your gasket. Smoke did come out from my exhaust when I first got it.
@anthonybranchflower43083 жыл бұрын
How did you fix it
@ghleader21793 жыл бұрын
Hi, my bike is moving on its own, how do we solve this problem? The governor is the problem? Thnx
@Moneymike2926 күн бұрын
Your clutch
@chriskobe85593 жыл бұрын
Would anything happen if you take off the spring for the throttle at 1:30
@kaleblong97652 жыл бұрын
Over time the throttle could stick
@davidcarpenter5589 Жыл бұрын
You didn't remove the governor! You just deleted the throttle stop!
@localDean7774 ай бұрын
yea the governor is inside the actual engine, very easy to remove just remove the black part over it. and what i did was simply take a screw driver and smashed up the governor gear
@joshuarudolph73923 жыл бұрын
Can I just bend the screw and all is good?
@Bataha3 жыл бұрын
yeah
@yoniga5142 жыл бұрын
So if I just bend the screw it will go faster
@hattratt1458 Жыл бұрын
I just took pillars and took The governor screw off And I took the little Spring off And my bike goes 34 mph
@6ifaceshxt Жыл бұрын
Does it still work ?
@hattratt1458 Жыл бұрын
@6ifaceshxt Yeah, it does still work but I don't have The 3 horse motor anymore on mine. I put a bigger motor on mine
@justicesmith58783 жыл бұрын
I'm getting this same bike in a couple of months
@gh0zt783 жыл бұрын
Thx I’m getting this on the 15th
@debon8833 жыл бұрын
@@gh0zt78 I’m getting mine this Christmas 🎄 haha
@ethant78863 жыл бұрын
Speed test w/o governor soon?
@Bataha3 жыл бұрын
Yeah, I'll post it tomorrow
@spicypenguin763 жыл бұрын
Does it still work with out the good spring
@michaelreilly69563 жыл бұрын
Yeah
@juicewrld9810 Жыл бұрын
You don't go to fully bend it just bend it enough for the throttle to go back as far as It can go so then u don't have to do all the extra shit
@xincubusx80679 ай бұрын
That’s a throttle stop
@sig39152 жыл бұрын
I did this and my mini bike gained 10 mph
@squidface43813 жыл бұрын
That's not the governor.
@DK_Staticz9 күн бұрын
Yes it is
@imsraxyt81223 жыл бұрын
I have a mini bike and took of the governer and its way more faster now
@brandyeasley46743 жыл бұрын
engine problems?
@imsraxyt81223 жыл бұрын
@@brandyeasley4674 how is it engine problems it made my bike more faster
@joeboi32403 жыл бұрын
@@imsraxyt8122 they are asking if they are any engine problems
@imsraxyt81223 жыл бұрын
@@joeboi3240 ohhh no not yet
@trevinskiking21653 жыл бұрын
@@imsraxyt8122 There probably will soon be !- depending on the engine brand.Trev New Zealand