How To Remove & Install Power Steering Pump Pulley

[@hallz9117]

A straight edge off the crank pulley is a great line up tool, the belt alignment between the power steering pump & crank is crucial point. Otherwise , if pump locks up so does the belt and the crank pulley will eat the belt when it jumps out of its groove.

[@michellemack9101]

That was a big help I really appreciate it

[@johnhutchison9782]

Nice Capri!🤘😛🤘

[@motor_citymuscle288]

Why am I having such a hard time getting this pulley back on. Are there Ford and Chevy puller/installer kits???? Wtf the as I tighten the nut the bolt going into the pulley (that’s bottomed out) loosens.

[@josephchamberlain9129]

Just what I needed

[@ayyy9017]

Do you guys have a link for this pulley remover tool? I recently bought one but it wasn’t the right size so I’m hesitant about buying another one.

[@latemodelrestoration]

OTC part # 4530 is the kit that we used. I sourced a longer installer screw with the correct thread pitch for both the installer bearing and pump. You can do the same by going to your local hardware store. I can't remember the thread pitch off the top of my head. Hope this helps! -Landan

[@POLOAZTECA]

The bolt on the loner tool I got caves in the center hole of the pulley shaft. Why does it only happens to Me? Doing the exactly same thing with same tool and same car as in KZbin videos and I'm the only one seeming to have problems!

[@GaryYoung-eq1ph]

Why after replacement have a noise situation like cricket sounds on econoline

[@latemodelrestoration]

I'd suggest you look over everything and try to troubleshoot the noise. -Landan

[@GaryVarness]

How do I get a spoke pully off

[@latemodelrestoration]

If it's a press-on style pulley, use the steps in the video with the correct puller/installer tool for you application.

[@jasonmyer9447]

What happens when the pulley will not go back on?

[@latemodelrestoration]

Make sure the pulley is even with the pump shaft. I'm not sure what else to tell you. -Landan

[@dividedwefall5382]

I guess you'd need a new one. But sounds like you might just need someone else to do it. Might need to elaborate more

[@hallz9117]

I know it just happened to me 😂