How to remove replace spark plugs and valve cover gaskets on Chrysler 300 dodge magnum hemi 5.7

Video #2
My IG: 13b_dorito
Here is some useful links for tools that you need to get this job done and that you will need on any other projects you might have!!
burrs 👉amzn.to/2UP4OvV
burrs 👉amzn.to/3b0pYNn
burrs👉amzn.to/34ilmzt
dremel 👉amzn.to/2x84b7x
safety eyeglasses
👉amzn.to/2UOATUE
air die grinder 👉amzn.to/2RgOt0K
general purpose grease
👉amzn.to/2RgSC4F
best magnetic flash light 750 lumens
👉amzn.to/2ULgmjA
my go to scanner 👉amzn.to/3he23N1
Scanners that i own and recommend 👉
amzn.to/3sKFt54
amzn.to/3o86P1r
amzn.to/3pdoSVu
amzn.to/2NlnCRZ
amzn.to/2Y7UEav
amzn.to/3qMPk8J
Head bolts for the LT engine left side "driver side" the one with the black Allen bolt 👉
amzn.to/398ddlc
Chevy LT solid lifters "make sure you look up it fits your chevy LS LT engine"👉
amzn.to/3ogU0BX
This one here is my go-to head set gasket kit "all you need to re install the heads" works for me on tahoe,silverado, suburban!!👉
amzn.to/3pcsCq5
AFM DOD lifter with spring acDelco 👉
amzn.to/3pdvRxE
My go-to favorite powerful impact gun cheaper nd better than milwaukee 👉
amzn.to/2Y5l4d0
swivel sockets 👉amzn.to/2PAPGli
metric socket kit 👉amzn.to/2MOScly
wrench set 👉amzn.to/2ZDisBq
brush kit 👉amzn.to/2NF8xZM
double side ratchet wrench
👉amzn.to/2NNSAQX
impact better than snapon and cheap
👉amzn.to/2LhrQXz
better nd cheaper than snap on
👉amzn.to/2HDWHvf
Jack stands 👉amzn.to/2NLEJe6
ratchet set 👉amzn.to/2NQkM5X
what i use to record the video
👉amzn.to/2UoMw2t
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for the support!

[@Zer0ctopus7]

Hell yeah, i can do this. Found oil on my spark plugs. Good video.

[@dirtydogg407]

Great video i learned alot by watching Thank you

[@willieshuman3550]

Thank you for posting 👏 👏 👏 👏 👏

[@PeriodGurl]

Don’t the valve cover bolts have to be torqued to 8.9

[@Patriot1RAM]

Thank you for posting this, I’ll be doing this same job this week. Did you go back and tighten the bolt you missed? Driver side, third coil pack, rear bolt.

[@JM8686]

Yeah got everything tight 🙌 Thanks for watching

[@RolandoGonzalez-rz9ov]

Can you change spark plugs with the valve covers off??? Or is there a reason you put the cover first and then spark plugs? I'm wanting to do this today

[@JM8686]

You can replace the plugs any time! Did that just cuz i forgot lol

[@RolandoGonzalez-rz9ov]

@@JM8686 thanks bro. One more question. I asked for the oem spark plugs and they gave me champions instead of Mopar brand. Do you think it'll do?

[@JM8686]

Yeah they will do it 👍 13b_dorito my Instagram for more help

[@desg6357]

Was that a regular 6 point offset 5/16th or 8mm wrench your using ? Looks like you bent it extra ?

[@desg6357]

or is it a offset ring wrench ?

[@louhernandez5789]

Just to be correct, you only hand tightened the spark plugs right?

[@JM8686]

Yes but you still have to make sure they tight like lets say 22lb

[@kevkev6706]

Why didnt you clean the covers while you had them off?

[@JM8686]

Because i was getting that one done in a driveway lol

[@moparcharger8642]

I know this is nothing about the video, but i been watching your green card videos and are very helpful, hopefully you can see this comment, how much did your attorney charged you for your case? They charging me about 9k for everything.

[@JM8686]

Thanks for watching the video and i paid way less ,for any other info 13b_dorito my Instagram

[@NicoleRodriguez-oj6jj]

Clean my covers an painted them hot red :)

[@JM8686]

Nice color 🔥🔥🔥🔥