How to remove replace spark plugs and valve cover gaskets on Chrysler 300 dodge magnum hemi 5.7

Replacing the spark plugs and valve cover gaskets on the 5.7 hemi engine
My IG: 13b_dorito
Here is some useful links for tools that you need to get this job done and that you will need on any other projects you might have!!
burrs 👉amzn.to/2UP4OvV
burrs 👉amzn.to/3b0pYNn
burrs👉amzn.to/34ilmzt
dremel 👉amzn.to/2x84b7x
safety eyeglasses
👉amzn.to/2UOATUE
air die grinder 👉amzn.to/2RgOt0K
general purpose grease
👉amzn.to/2RgSC4F
best magnetic flash light 750 lumens
👉amzn.to/2ULgmjA
my go to scanner 👉amzn.to/3he23N1
Scanners that i own and recommend 👉
amzn.to/3sKFt54
amzn.to/3o86P1r
amzn.to/3pdoSVu
amzn.to/2NlnCRZ
amzn.to/2Y7UEav
amzn.to/3qMPk8J
Head bolts for the LT engine left side "driver side" the one with the black Allen bolt 👉
amzn.to/398ddlc
Chevy LT solid lifters "make sure you look up it fits your chevy LS LT engine"👉
amzn.to/3ogU0BX
This one here is my go-to head set gasket kit "all you need to re install the heads" works for me on tahoe,silverado, suburban!!👉
amzn.to/3pcsCq5
AFM DOD lifter with spring acDelco 👉
amzn.to/3pdvRxE
My go-to favorite powerful impact gun cheaper nd better than milwaukee 👉
amzn.to/2Y5l4d0
swivel sockets 👉amzn.to/2PAPGli
metric socket kit 👉amzn.to/2MOScly
wrench set 👉amzn.to/2ZDisBq
brush kit 👉amzn.to/2NF8xZM
double side ratchet wrench
👉amzn.to/2NNSAQX
impact better than snapon and cheap
👉amzn.to/2LhrQXz
better nd cheaper than snap on
👉amzn.to/2HDWHvf
Jack stands 👉amzn.to/2NLEJe6
ratchet set 👉amzn.to/2NQkM5X
what i use to record the video
👉amzn.to/2UoMw2t
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for the support!

[@wrathofpaulii]

I love seeing these videos that get straight to the point without any fancy music or editing. lol

[@williamcattr267]

Excellent!!! That is how I want to see a tutorial, start off by telling us what size socket we need for a particular fastener! Thumbs for for doing that!

[@bowenlennon178]

Instablaster

[@Mayjah_flexx]

This helped me a lot with the valve cover gaskets. Good job my man!!💯🙏🏾

[@bleekjones1565]

He got straightto the point! I love it!

[@JM8686]

🙌

[@nandoohemi1152]

Appreciate the content 💯 I have a 5.7 hemi saving labor money with your videos 😅

[@Foryaaaa834]

This is the best video he explaining everything good job

[@fillupbanks7885]

This is the perfect how to video!! "Do this, do that, do this!! When I start doing videos this is how I'm gonna do it.

[@JM8686]

Thank you brother 🙌

[@HazardGamin]

Bout to have to do the gaskets tonight, Thank you so much for this Tutorial!!

[@JM8686]

Thanks for watching 🙌

[@kenbkooln9289]

Great video. Trying to build myself up to replace mines.

[@r.b.l.5841]

Hey Thanks, I had a pita Driver Side Valve Cover gasket leak for a long while on my 5.7 finally got it to stop, this was the problem: What i found for mine was the rubber bushings on the valve cover studs were all too far gone rotted to be reused so when i tried to just change the gasket without new stud-bushings it just continued to leak. Getting new rubber stud-bushings and doing this (pita) job a second time (yeah I know) worked. hopefully the point about the new stud-bushings helps out someone else to not have to do this job twice like me. (also some spray gasket adhesive for the valve cover gasket made re-installation about 1-million times easier).

[@JM8686]

Thanks for sharing

[@YoungAmzn]

one question when doing rocker arms are all 4 arms on each side the same ?..

[@eldestrug3430]

So how did you get the bottom studs? Because I cant get to them with either of my deep or shallow sockets, and they don't make stubby wrench's that small.

[@foxman3910]

Ok so that extra lip on inside of valve cover is that put on with it at bottom then ? Where you put new gasket on theres only one side that has a lip .

[@jensonhartmann3630]

Excellent video! Get a headband mount for your camera so you can use both hands on your project instead of holding a camera. it helps even for a 10 minute video. Great job bud.

[@JM8686]

Great idea 💡 thank you 🙌

[@beastfromtheeast9318]

Passenger side is a bitch because the wiring harness is in the way. The driver side is easy.

[@michaelsmith7818]

Supposed to tighten valve cover starting middle going outward

[@JM8686]

True but never do that nd haven't have a leak yet lol Thanks for watching

[@nandoohemi1152]

Where’s the other part of the video ?

[@burlsigler8454]

Did you have to remove the spark plugs in order to remove the valve cover?

[@Jayhuncho214]

Do u have to take off coil packs in order to take off the valve cober

[@JM8686]

Yes sir 🤘

[@lsxbird7874]

What is the part number on that matco spark plug socket set? I want to get that tomorrow on the truck lol

[@JM8686]

Don't remember the part number but will try to get it tomorrow! 13b_dorito my Instagram

[@denissegb8918]

i really needed to know how to remove the fuel injector connectors. Mine don't budge.

[@chriscurry9201]

Pry up with a screwdriver

[@jolu7019]

why did you not change spark plugs when you had the valve cover off ?

[@KyleRocKSt4R]

How did you get the back bolt off on the passenger side ?

[@Realofficialdee]

I used a swivel and extension. Usually just to break to bolt loose. Then I’ll use my hand to do the rest

[@ariloslav]

the valve cover must be pressed evenly by tightening the bolts in the correct order - according to the instructions!

[@seandp85]

All I did was get a Milwaukee hand saw and cut the front 3 passenger side bolts studs off so I could reach it with a shallow socket, and the one in the back against the firewall was the easiest, i just stacked about 3 extension and stuck it through the harness wires. I replaced the bolts that I cut the studs from dealer for about $4 and save myself the headache and I also cut the new studs off also to save myself in case I have to do this job again

[@JM8686]

Whatever it takes 🤣👏👏

[@Name-io6dk]

That's pretty smart cuz I noticed that the guy who made the video didn't show the the most difficult part of the job either

[@seandp85]

@@Name-io6dk the passenger side is really hard, to get to the last bolt closest to the fire wall I just stacked about 2 extensions and guided it through all of the wires

[@Name-io6dk]

@@seandp85 how long did it take you to finish the passenger side

[@JM8686]

All i use is 1/4 8mm socket nd 2" to 3" extension nd the 1/4 ratchet too

[@benjilara6155]

How did u get the back bottom corner ones out !???

[@JM8686]

13b_dorito my Instagram for more help

[@domenictv2880]

How you get that back screw on the passenger side valve cover

[@JM8686]

With a 1/4 swivel or a small wrench nd by hand

[@domenictv2880]

@@JM8686 thanks.. the passenger head i hate. Them back screws on the valve and the head always give me trouble

[@JM8686]

Yeah they sucks 😕

[@BodyWeakDotNet]

That's what i was trying to see?? We saw everything but that! It's doesn't look like even changed the passenger side at all...

[@cliftonsargent1572]

How do you take the engine cover off to paint or put a new one on?

[@JM8686]

You mean the top plastic one or the valve covers?

[@cliftonsargent1572]

@@JM8686 the plastic piece that has the badge label on it

[@JM8686]

Just pull it up Don't think that it got any 10mm bolts on top

[@RolandoGonzalez-rz9ov]

Do we disconnect the battery?

[@JM8686]

Yeah

[@ahmedjimenez9414]

Guys help me out, does this stop oil from leaking? I have that problem and they told me it was the valve Cover

[@JM8686]

Yes sir

[@KRTube75]

Oh dear. Clean that engine bay. I also recommend a tripod. Otherwise, great video.

[@JM8686]

🤘

[@Mitch1732]

Why u let your engine get that dirty ? My engine is as clean as my car