How To Remove Stuck On Electric Pto Clutch Easy

Thank you for watching!! If we helped you out and you want to show your support - LIKE, SUBSCRIBE or give us a shout out below. If you saw something you didn't like leave your comment below as well, these things help us get better!
To see our recommended tools and products visit our Amazon shop at www.amazon.com/shop/individua...
We remove a stuck on electric PTO clutch and pulley from Ariens Zoom 2040 zero turn riding mower.
The clutch will not come off.
We use penetrating oil and an air hammer with a blunt end.
You can purchase a similar air hammer at amzn.to/3RwFR5y
This is the easiest way to remove a stuck on clutch.
If you do not have an air hammer you can use a regular hammer and lightly tap with a punch but it takes a significantly longer amount of time.
Like and subscribe to see more helpful videos like this one! Save some money by doing it yourself!
#ariens #smallenginerepair #individualizedrepair #zeroturn #kohler #smallbusiness #individualizedrepair
About Us:
My name is Martin. I have been repairing tools and small engines for almost 20 years. We operate a small engine repair shop in Illinois. We service / repair Briggs & Stratton, Kohler, Kawasaki, John Deere, Cub Cadet, Toro Tecumseh, Loncin, Honda, Craftsman, Husqvarna, MTD, Troy Bilt, Simplicity, John Deere, Exmark, LCT, Generac and many more brands. We work on riding mowers, walk behind mowers, snow blowers, zero turns, generators, pressure washers and much more. We normally repair about 3,000 pieces of equipment every year and look at many more that are beyond an affordable repair. Hopefully our videos will save you some money and give you the information you need to work on your own equipment or figure out the issue at hand.
Disclaimer: Links included in the description are affiliate links. As an Amazon associate we earn from qualifying purchases. There will be no additional charge to you for purchasing here. We appreciate your support, which allows us to continue to provide original content!
Please be careful when repairing any piece of equipment and follow all possible safety measures. This video is for entertainment purposes only.

[@samallsop6700]

I spent last night worrying about how to get the clutch off my Gravely 988105. The alternative was to take it to a shop to have it done, with a 7 week backlog. This technique had the clutch off in less than a minute!

[@Fauncebrothers]

Worked like a charm on a clutch that was scaly and looked like it spent some time in the ocean! I bet an old timer taught you that right? lol take care!

[@Buck1954]

Thank you. This is exactly what I was looking for. I've tried the pry bar, and didn't want to stick a torch up in there. I've got an air hammer.

[@charlesgale8115]

When the top belt is left on the pulley is in a bind on the shaft. If the belt was off, a slight tap usually removes the whole device. 90% of the time, when the belt is off, taking the bottom bolt lose is all that is needed and the whole thing falls off.

[@philliphall5198]

Short crowbar and air hammer will take it off very fast most of the time 😊

[@lakefishing]

Does that PTO still work?

[@thefordmowerguy]

Thanks! I was trying to get the PTO clutch off my ford yt16 for the upcoming tractor show and I worked on it I just couldn’t get it off, this tractor was previously neglected a little bit, and there’s oil all over the bottom of it so I didn’t want to risk using a torch. So I tried this method and it worked out just fine after a while.

[@hollywoodhitch6678]

Best method I have seen. thanks

[@charlesgale8115]

See how easy it was with the belt off?

[@Makoonga]

Why did you take the top pulley off? That's got nothing to do with the PTO clutch.

[@416rentalpropertymanagemen3]

Awesome! So glad I saw your video! I was ready to throw the towel 😂keep passing on the message!

[@mikekretzer8546]

GREAT VIDEO ...WORKS REAL GOOD !!

[@MrRudyc]

Great idea! Thanks for your info 😊

[@greggb1416]

Excellent video..!

[@nehemiahholderbaugh1502]

Awesome saved me a lot of time...thanks for the great video!

[@razvanmihalache5680]

Thank you. Unfortunately I do not have an air chisel. I used a electric impact wrench a socket and a pipe wrench to do the vibrating. What I did was I had a pipe wrench that was about 11/16inch wide and put that in the end of the socket and while holding the grips I turned on the impact wrench and since the socket couldn't spin the hammering impact feature made the pipe wrench vibrate so I put it up against the engine bolt. I used WD-40 and it penetrated enough that I was able to hit the assembly with a hammer and the whole thing fell out.

[@ricktemple6469]

FYI on my xt2 I bought new in 2016 I just sprayed liquid wrench on mine let sit for 20 mins came back out to spray more on it damn pto clutch and upper pully both laying on garage floor

[@philliphall5198]

Crazy ass people who complain when you’re sharing your knowledge and they still not happy 😆

[@joleaiperlis5347]

I have the same exact mower but it is a gravely zt2040.

[@kenyates144]

Yep