Thanks for such an easy to follow, simple instruction. It gave me the courage and motivation to get started diagnosing. The shunt wire proved that my motor was working, the fins were dipping into the non-existent water, Checked water supply, tube from valve to the outside back of the ice box area. Next I tried to 'blow' through the tube from the end I disconnected from the valve and could not blow any air through into the ice cube/water area. This indicated to me that there was a blockage somewhere between the valve and the cube. Suspected frozen tube, used the hair drier to warm the tube inside the ice box. After a few minutes I tried blowing through the tube again and was successful. Reassembled everything, turned the water back on and let the shunt run the motor through a cycle and heard/saw water come into the mold. YAHOO! I have water, now we wait for ice to confirm repairs successful.
@darienfrancis27995 жыл бұрын
Outstanding video. Fixed mine in 15 mins replaced the whole module. Kudos to a good man exchanging info for us DIYers. Thanks
@traubgator3 жыл бұрын
Was originally going to order an entire new ice maker, then i stumble upon this video, where for $29 bucks I could replace the entire Motor module control. worked like a charm! couldn't have been easier --- the hardest part was taking the plastic over off the front of the machine to be honest! if people are scared about just replacing the motor, i purchased the entire module and it was a breeze and mentioned in the note.
@NoreenKeesey5 жыл бұрын
Thank you so much for this video. I was able to repair my icemaker by myself for only $23. I am NOT very handy and with your help it was easy.
@peteflynn392310 жыл бұрын
I bought one yesterday for $28 on eBay. The "retail" parts seller wanted $70! The first time this went out I was embarrassed to observe how easily the repair man fixed it and shocked at the bill. This time I saved over $100 doing it myself.
@johnmccormick2883Ай бұрын
Great Video! I just replaced my control module and will look at replacing the motor on the bad unit that I removed! Your video was one of the best that I have seen on this subject!
@MinhPhamGators10 жыл бұрын
Thank you. It costs me more than $2.50 to replace mine, but doing it myself makes me feel good. Thanks for the clear instructions.
@ralphmalph14647 жыл бұрын
Thanks for the video. One thing to check is the contacts on the module. There are several pins that contact the metal runs on the module. On mine, I found corrosion on one of the contacts. After cleaning it up the ice maker is working again.
@rotfan779 жыл бұрын
Thanks so much for posting this video, I was able to buy the front section of my icemaker that included the plastic gears etc. and the motor for about 25 bucks. Saved me a bundle of money and was able to do it myself. Thanks again
@erikakrueger43314 жыл бұрын
Thank you! We couldn't find the individual motor, but we were able to purchase a complete front control panel for 25 bucks off of eBay and replace it. You saved us at least a hundred dollars with your video, if not more!
@bonitamac3634 жыл бұрын
Wonderful video. Straight to the point without all the fluff. Thanks!
@hootinouts Жыл бұрын
Wow, that motor replacement couldn't be simpler provided someone shows you how to do it. I just replace my entire icemaker as the coating on the ice mold tray is old, blistering and flaking off. Anyhow, I salvaged the original motor and added it to my surplus parts collection. Thank you for sharing this.
@nypana12026 ай бұрын
How is the motor holding up after a few months of use?
@mukwah111111 жыл бұрын
Yes, it was out of stock when I looked too. I ended up getting the whole module at an onsight repair parts place. Under $20. & well worth it. It took about 5 mins to take out the old one & replace. Thanks so much for your vid though. It made fixing/repairing/replacing an undaunting task. I would never have thought to replace parts myself. Also had to change out my thermostat - again - cheap, easy & a perfect fix. Thanks again
@pudrowilson33548 жыл бұрын
your the MAn on mods and fixing and investigating motor/honest fixes, you should be a college professor, back in 2012, you help me mod?trouble shoot my double horse, syma helicopter,,, your the man, thanks for your patients and kindness to help other people
@5460sundance7 жыл бұрын
thanks for the info I checked mine out everything was good. except for the broken water filling line next to ice maker,it had came off i took off back covering in freezer only to find a frozen tube encased in ice water was running down behind the cover. Cleaned it all up put everything back wa la ice.
@tracyrollins767822 күн бұрын
Thank you. Just may have saved me a few hundred dollars.
@mclarkallen9 жыл бұрын
I have a cheap skate ice maker repair book. This ice maker is in it and I have fixed it at least once. One thing to do, besides waiting for the paper to fall, is to make a short jumper wire, maybe 2 " long. strip the ends and insert each end of the wire into the 2 holes located about 5 o'clock on the gear. That will start the motor. Quicker than waiting.
@apilatoful5 жыл бұрын
Should be labeled T & H. Also if you check that and the motor starts working... Then you can put the wires into holes L & V. If you don't hear water filling the box then that's your problem
@joepinehill7 жыл бұрын
This is very good video. My Frigidaire stopped making ice. I ordered a replacement ice maker from Amazon and removed and replaced. But, taking the old one apart, I confirmed the motor had failed, and was stuck in the heater on position. Next time I have a bad ice maker, I'll check the motor first.
@effrus19 жыл бұрын
I have an associates degree in hvac and i had to take a course on domestic refrigeration and domestic ice makers. THIS INFORMATION WAS NOT ON THE COURSE AND WISH IT WAS. it's a shame that after spending all of that $$ that i had to turn to youtube to get information on how to make a repair with out condemning the entire ice maker. I spent half of the money by following your instructions, thanks ! $52 with tax. u.s.d for the new part.
@acehaagАй бұрын
Great idea with the paper
@Frank_Cohen6 жыл бұрын
Dude, I can't thank you enough. I am an uninitiated and, therefore, generally, terrible do-it-yourselfer. I know nothing about ice makers and never heard of a "power module" in my life. Thanks to you, I was able to diagnose, buy the replacement module for about $22 online, and easily repair my ice maker.
@KTG11076 жыл бұрын
Great video! I was NOT able to replace just the motor. Mine did not twist off as demonstrated. However, I was able to order the entire module for $21 with shipping and tax (McCombs Supply). I performed the quick and easy replacement of the module and now have plenty of ice.
@NDx8187 жыл бұрын
HAMMYDUDE! You are my hero. I honestly was lost until I saw your simple yet very helpful video. Thank you for the assist!
@garykorzelius59306 ай бұрын
Instead of waiting hours for the unit to cycle you could pop the cover off the front and stick s jumper wire in the holes at the bottom marked T and B. If your ice maker is working, within 1 min the unit will start to rotate. If it doesn't then the ice maker is in need of repair. One note though NEVER rotate the cam by hand. This will save you hours of time and I use it every day on my appliance repair job.
@kalibryant86089 жыл бұрын
Your a life saver !! Just fixed our ice maker thanks to you. Great video
@dougmeacham33769 жыл бұрын
That was about the best video I have watched today in my research to fix my ice make
@zataman10 жыл бұрын
Just replaced mine today. I am back in action. Great video very helpful
@kpfeif3 жыл бұрын
I was trying to figure out why my Kitchenaid ice maker stopped working and found your video. I opened up the modular unit and took a look at the points. They were corroded a bit, but one of the contacts where the things from the other side of the unit was completely vaporized. The black plastic on the adjacent side was melted, too.
@synthvault10 жыл бұрын
Great and well produced video. Some people would replace the whole module not go in and swap the actual motor. That's level 2 DIY! :) Thank you!
@fishycomics3 жыл бұрын
I can piece part my fridge out to buy a new one . amazing on the mark up of parts.
@richardgetz99759 жыл бұрын
Great video. Short to the point and informative.
@craggslist11 жыл бұрын
I just pulled my module off and I found my motor did not separate. Additionally, I found my gear drive had a stripped tooth. Video have me the confidence to pop that sumagun open.
@AlexCBrandon11 жыл бұрын
These videos are extremely helpful and well presented. Thanks! If I may humbly offer one piece of advice for future videos, your voice is cut off when you fade between takes, so some of the words are difficult to hear. If possible try a straight cut, and when recording leave a second or two after the last spoken word before stopping the camera. Again, thanks for the helpful tips!
@dexterschokman11535 жыл бұрын
Ice maker Motor is working can see it turn. Valve is working tested by swapping with water soleniod. Yet no water comes to the ice maker. Any ideas would be welcome.
@protecinspectionservices47419 жыл бұрын
Thank you for sharing. You saved me several hundred dollars.
@fideliciasalaverriaaguilar56523 жыл бұрын
Very good video , however, tried numerous sites and this motor and it does not seem to be available.
@robertl12444 ай бұрын
I have ice still frozen in the unit. but, no ice is coming out. This fridge is 23 years old. Got my moneys work from it for sure! So, what is the part I need? The little blades are not showing. What about the heating part of it to loosen the ice? Could that be the issue? Also, your fridge looks like it still has power. Did you not unplug it before taking it apart?
@pauldavisson99625 жыл бұрын
Excellent! I was looking for the sequence of operation!
@chinesestunna5 жыл бұрын
I followed this video and determined the issue was in the motor assembly, however just before cutting the wires, I hooked up 120v AC to the motor and turns out it was working fine. It was an issue with the gearbox which some cleaning and greasing fixed. I recommend everyone to test these parts separately first before cutting otherwise you'll need to re-solder wires if it turns out not being the motor after all
@jeniferhoffman205 жыл бұрын
Thank you, I fixed my ice make with this video!
@billionj8 жыл бұрын
Good video, fixed! Now I have another one I need to test. Can you tell me how to bench test an icemaker so I don't have to uninstall the other one and install this one to use the jumper? I assume two of the four wires at the jack would need 110v, but which ones?
@afterhoursappliance11 жыл бұрын
The thermostat to start the cycle is behind the modular head. with no water at front the thermostat cools faster, The water doesn't. Cycle will trip,, bust through ice, which is half frozen. As it rotates, the water will drain out of the center of the cubes, back into the mold. Hollow ice is then dropped into the bin.
@lillithanne97045 жыл бұрын
Excellent video. Thank you so much for creating this.
@sultrypeach910 жыл бұрын
Very clear instructions. Well done and thank you!
@mitubesoutube111 жыл бұрын
Great video, Great response from skycraft. Discovered the large plastic gear spindle is also broken, Presume the number printed after the word ...Manually 628358 is the part number for this control part. Suggestions where I might purchase? Don't think super glue is the way to go.
@sc76097 жыл бұрын
The ice maker in my whirlpooI stopped working. Estimated the repair bill to be about $200 in labor and $100 in replacement ice maker, if done by service guy. After viewing this video, i dared to remove my ice maker model W10469286, tested it, motor did not work, so I took it apart to replace the motor. But I found that the motor cannot be separated from the gear box. It is attached with metal hooks. I pried the gear box apart from motor by wedging a flat head and hammer. Yes, it separated but this is not a screw on type. Then I looked for a replacement motor on ebay. No luck. There is no M004 motor that even looks like the original (or one that looks like one in this video). The entire front motor module was available for $25+, but it does not fit my model . So I ended up ordering a new ice maker, same model, supposedly OEM Whirlpool original just for $38 free shipping from Amazon. Looks similar in picture but I will know for sure when I get it in a week or so. For that price I would recommend just changing the whole ice maker rather than go through the hassle of disassembling every thing. After ordering the whole unit, I decided to search it non-ebay. I found Fleck part # 18743, the motor with the gear box for $18, looks similar to the original (don't know if the gear ratio is the same or not). Thanks for the video.
@bradi50504 жыл бұрын
Very good video thanks having trouble with mine good start lol
@jeanniejimenez8960 Жыл бұрын
The hole to the left which signals the water to run has burnt out. The tiny copper sheets. How to I fix that part? The module runs and runs well but no water due to that area being burnt out.
@jamesrizzi75005 ай бұрын
My ice control arm popped off. Now after reattaching it, Ice maker makes too much ice. Control arm moves when Ice is harvested, yet it does not stop making ice when the bin is full and control arm stops on top of ice pile. Also, If I put control arm into top position, I hear a click; nevertheless, the ice maker continues to make ice??? . Any fixes for this???
@baryka20153 жыл бұрын
Why you dont test icemaker cycle puting wire to two holes H and T ? Will tell you if dispencer is working or or not and motor is OK.
@harriettdech48786 жыл бұрын
I have a double Door GE refrigerator and ice maker. My ice maker is making this constant clicking noise won't stop and it's driving me crazy. I cut off the ice maker but it's still making the noise. Can you help
@edca81146 жыл бұрын
My I maker stopped working about 6 days ago and the arm is stuck half way I did pull the cover and arm and replaced arm to the lowest position ... now just waiting to see hopefully it works will check out if I got ice in few hours ....
@jfperkins36 жыл бұрын
Exceptionally good video. Thank you.
@JakeLeslie11 жыл бұрын
Thank you for making this video.
@ttiwkram3 жыл бұрын
Might not be a bad idea to grab a Sharpie and transfer the info from the old motor's label to the new motor -- for next time. :-)
@wrongmower11 жыл бұрын
Great vid, guess i will try it, mine just quit, thanks for posting
@willt964110 жыл бұрын
Can someone post a link to where they have purchased the motor component for a low price
@LigitandMeyers10 жыл бұрын
I just replaced the inlet valve. My ice maker has an issue. Water is not being sent up to it. I ned to know if you have a video showing me what to look for ? I also wish to know, would confusing any of the plastic tube leads cause this ? The 2 for the bottom of the chambers are 2 different sizes so no confusion there. However there is 1 firm,opaque lead for the front of the inlet assembly and 1 that runs off to a second attachment, also opaque and firm. I saw your video on how to install the inlet valve and it showed me what I had already figued out but yours only required 1 of the firm lines. The part that yours came with that MINE uses, you discarded. Anyway, input,ideas ? Thanks ahead of time. GOing to try to figure this out tonight, hoping you see this today. Have a party tomorrow for the family and not wanting to buy and deal with the logistics of storing 5 bags of ice :)
@jonathandough94137 жыл бұрын
What type of stores would sell motors like that? Or would we need to order the part through the manufacturer? (Where/How did you get yours?)
@Kyle-xt8ip17 күн бұрын
legend.
@hammydude1234511 жыл бұрын
I checked skycraftsurplus and they list the M004 motor as out of stock. that's where i bought mine. hopefully they will get it back in stock. the motor is also known as 2m 5228b 130rpm. if you find another supplier please let me know.
@jackfntwist8 жыл бұрын
I have a door ice maker dispenser. I replaced the entire motor for the dispenser with the oem part, exactly a year ago, and it is burnt out again. Cost $100. Can't afford to keep doing this. Do you know any way to just repair the motor and prevent this from happening every year?
@jackfntwist8 жыл бұрын
whirlpool refrigerator motor 2252130
@NeilBSteiner9 жыл бұрын
I'm in an area where there is a high concentration of dissolved lime in the water. There is no water coming into the ice maker through the electric valve from the copper water line. It is coming from bellow the floor and where it is tapped into the main water line it is not accessible below. I have been told that these tapped lines can form lime deposits over the years and I think that is my problem to point that it has choked off all of the normal water flow to the refrigerator ice maker. MY question - how can I clean this pipe out?
@Cdswjp2 жыл бұрын
neil, were u ever able to figure it out? I might be having a similar issue
@lbohen4 жыл бұрын
Our Kenmore side by side refrigerator ice make does NOT make ice even though the water pressure to the dispenser is fine. I've tested the water dispenser and it fills (8) ounces in about (12) seconds. Could a defective water inlet valve be preventing ice making?
@zataman10 жыл бұрын
I have this problem. The white dial you see in this video has broken off, so I assume that if i replace the motor it will work?
@jpickles86275 жыл бұрын
Such a great video. Thank you.
@dgrGR615 жыл бұрын
Simply pour water into the ice maker cube area yourself. If it only makes 1 tray of ice, you have a water supply problem.
@bspammed29 жыл бұрын
I have the same ice maker but their is a little copper arm that came off. In your video at about 2 minutes I see you removed to arm lever. Under the white plastic piece that the lever arm actuates is where the copper arm goes. How do I put it back?
@monkey70907 жыл бұрын
you dont have to strip the wire before putting them in place?
@GarciasHVAC7 жыл бұрын
tomfoolary The wire slots will strip the wires when u press down on the wires. Just make sure u have unplugged unit and press down firmly.
@lifeartphotographers401410 жыл бұрын
Fantastic video!
@pgibson60807 жыл бұрын
My icemaker was not dumping the ice. I removed the icemaker and when I took off the motor cover, everything was coated with ice. I removed all of that, scraped off the blue corrosion, and reinstalled the icemaker. The teeth seem to be working now but I can't get the icemaker to fill with water. It was filling before, just not dumping. Did I do something wrong when reinstalling?
@sibbickr5 жыл бұрын
I have replaced the icemaker and water valve in my Maytag Model #m9bxxgmymoo with no success at making ice. I have checked that there is no obstruction in the delivery of water to the ice maker, it seems that there is no power to the unit. Where else can I look for the problem?
@dynamite65072 жыл бұрын
Mine keeps cycling . It will fill and stop filling and go completely around and repeat
@joanratner38847 жыл бұрын
My ice maker makes cubes, but sometimes the cubes don't make it into the ice bin. The cubes fall onto the first shelf or they just stay on top of the ice maker. Any ideas as to why this happens?
@tinadenfeld33207 жыл бұрын
my ice maker makes a terrible roaring sound when it dispenses ice. Can you tell me what is wrong. . It is a GE Profile ice maker with dispenser in ;the door.
@lizveta66435 жыл бұрын
Any ideas? I broke off the piece you said to put the paper on. Can it work without that piece?
@MeLuvPeople9 жыл бұрын
You sound like Bill Murray
@robbieapshire71018 жыл бұрын
great vidio now I can fix my ice maker lol.
@PutGodFirst7710 жыл бұрын
The contacts have been burned out on most of the ones I see. The thermostat on the Ice maker could be bad as well.
@toml9487 жыл бұрын
I noticed the motor in the video at 1:45 is different from the one at 1:55. He is able to remove the motor in the latter shot but the one at 1:45 (which is the one I have) cannot be removed. I will just buy the unit for $70, no biggie.
@OtisPlunk4 жыл бұрын
Yep... and one assembly is witness marked "Old". The new assembly gets you a new mold, motor, thermostat, tray heater, etc... etc...
@hammydude1234511 жыл бұрын
sorry, i don't know where you can buy just the plastic gear
@markolsen74387 жыл бұрын
Does this unit control the water inlet flow? Or how does it know when to supply the water?
@benwilson25623 жыл бұрын
At 1:37 of the video it doesn’t show how to remove the gray metal cover of the motor. Help! :-)
@ButterBaby2u9 жыл бұрын
You touched on the base module going bad. Do have a video for that?
@afterhoursappliance11 жыл бұрын
The fill is time-based (~7 seconds). You have a restriction in water flow. Either the solenoid valve in back of ref or you plumbing to the valve has a restriction. Cut off water to the ref, take off the water line to ref and check water flow. The water should be at a flow of 30-60 psi. Why does this make them hollow? The icemaker fills from the back to the front. If you don't get enough water, you will have empty chambers to the front.
@TyHenrichs11 жыл бұрын
I have a different type of motor. Its a m006 15 w 120 v 60hz it doesn't disconnect with the gear shaft easily, by turning, and is improbable to reconnect without the proper tools. just wondering if you had any advice for this type of motor for cheap repair.
@arcad1an2929 жыл бұрын
Nice work!
@anthonymartin241211 жыл бұрын
Freezer temp not 16 deg to turn on ice maker . Freezer need to be about (0) deg.
@mitubesoutube111 жыл бұрын
Thanks for the advice. Could you explain how to reinstall the plastic gear I asked about so it is properly aligned? I presume it might be referred to as a sequencing gear for the icemaker?
@douglasstone89157 жыл бұрын
Great video.
@jeffreynelson26608 жыл бұрын
Sir: I have the same ice maker as in your video, but there is no power to the ice maker cable. Any idea why?
@bdraider799 жыл бұрын
Help...my my ice maker won't turn off...it is spitting ice out and the light won't go off
@TyHenrichs11 жыл бұрын
or if there is a place where I could get the gear base that the motor sits on that would fit.
@hectorlongoria96252 жыл бұрын
Where can I buy the motor at...thanks
@ChristianBorchgrevinkVigeland5 жыл бұрын
Anyone knows which cables to check for power? It seems the ice maker doesn't get power at all.
@larryd.millerii5708 жыл бұрын
ok, I have a question... one of the contacts for the ice maker defrost coil is burned or corroded both on the brown plastic "board" with all the copper strips and on the end of the u shaped coil itself. Will this keep the ice maker from allowing water to flow into the tray to make ice?
@dianneanderson7318 жыл бұрын
+Larry D. Miller II Seems like the guy isn't answering anybody's questions on his video.
@dddPetey7 жыл бұрын
great tutorial video. my question is, during the time it took to make ice, did you happen to notice the freezer temperature rise anywhere from 0-8 degrees and back and forth like so? i'm wondering if making ice with no ice in the container does have the freezer temp fluctuate until stable? any advice would be helpful
@yeahitworks4 жыл бұрын
Funny. Ice maker doesn't move, and it's broken motor right away without looking at it? (Maybe in your case, you must have some x-ray vision). But No, There are several pieces in there that makes the motor not move.
@timberwolf563411 жыл бұрын
Great tip thank you, But skycraft does NOT ship to Canada. Do you have a Company that does? I have tried everywhere here where I live and have had no luck.