How To Repair SMALL Rips & Tears in Vinyl & Leather

[@SweetProjectCars]

Hello Everyone hope you had a great weekend :) Here is your Sweet Sunday review. This kit will do all your small repairs needed around your home and garage. Make sure you watch the entire video as we have info on up can coming videos :)

[@Gearhead-en8dz]

Hey Mike. I have patched a hole in my tonneau cover a couple times now with this style kit. Keeps peeling away from edges! Any tips???

[@slothman5520]

Nice kit.

[@SweetProjectCars]

Yes we have found that the edges will appeal if the area is not cleaned very very well with 99% rubbing alcohol the other reason it will happen is that there was not enough heat to get the edges to adhere when doing this we tend to have our focus on heating the very center and forget about the outer edges hope this helps my friend thanks Mike

[@Gearhead-en8dz]

@@SweetProjectCars Thanks Mike👍

[@SweetProjectCars]

CASPER 12345 if you follow this video and do the same thing it will work great on a cig burn. thanks mike

[@SpitSharp]

I was down in the dumps all weekend but this fixed my tears:)Thank you Bro.

[@paulyokey]

I have been waiting for this! Got a hole in my couch while moving a month ago. My wife asked me how do we fix it? I said let me check with Sweet Project Cars on KZbin and he will show me how to fix it. There ya go. Love your channel and your content. Thank you very much for the information you provide to your viewers on your channel.

[@SweetProjectCars]

Yokeman Yokey thank you very much mike

[@kinglangren]

This may sound crazy but on my black vinyl seat I used rustoleum rubber coating “flex seal type” and it surprisingly work really well. It took several coats.

[@kylemlm]

Unbelievable DYI repair. I have Dobermans who like to party when I am not home. Thank you so much Sir.

[@scottnra]

buying that kit from your link man! I have a couple small holes in a boat cushion from factory screws to fix and might even try to fix that knife wound my buddy put in my black leather seat! Thanks for the video!

[@SweetProjectCars]

Awesome!! Thanks for watching and sharing Scott, have a fantastic week and all the best on your project my friend. mad Mike & team

[@cyndi9009]

Very helpful thanks! I tore a small hole in my headrest & was able to fix it with the kit after watching this video.

[@SweetProjectCars]

Nice work Cyndi! Glad we could help! Thank you so much for watching and sharing your results, we truly appreciate it, have a great weekend my friend. mad Mike the hammer SPC

[@britton6062]

I have a few cracks in my vinyl dash in my Benz that drive me up the wall. I literally stare at them every time I get in the car. The Florida sun is brutal on cars ! One guy gave me a 2k quote to reupholster the dash pad! Anyway, now that you've done this technique , I'm definitely going to fix mine myself. I'm beyond grateful for your vids dude, much luv from jacksonville fl !

[@SweetProjectCars]

Glad we can help in sunny and warm Jacksonville

[@DjDestinyChicago]

This turned out beautifully. I just bought the same kit for my almost brand new coat that was unfortunately left out around a miserable ass cat.

[@SweetProjectCars]

Yikes... glad to hear you are working on your problem :( Thank you for watching. Have a great day. mad Mike the hammer SPC

[@BruceLyeg]

Very easy, yet undetectable repair. Very nicely done.

[@mezzyshredder]

This video is fantastic! Spot on. Great description of what you are doing. I remember the kids that used to sell on television in the '70s to fix your couch. This is a much better description and a much better kit. Thank you for making such an awesome video. Now I can repair my trans am seat that has a miniscule rip. Such as the one you repaired. Thanks very much! Subscribed!

[@SweetProjectCars]

Glad we could help, Mezzy! We truly appreciate the view and comment, hope you have a great week and all the best on your project my friend. mad Mike the hammer SPC

[@doncorey3206]

What was the name of the product you used? The repair came out perfect? How durable is the repair?

[@roseredd7895]

Sweet ! Impressive job and I appreciate the explanation , going to try to repair a tear on my passenger door . Thank you 👍

[@SweetProjectCars]

It's our pleasure to share Rose! Thank you for watching and commenting, we really appreciate it, have a great day and all the best on your project my friend. mad Mike the hammer SPC

[@jackifrench8902]

Love the video but it appears the kit is no longer available. Can you recommend a replacement? Thanks!

[@SweetProjectCars]

We are using this one now amzn.to/3iV1ueI they discontinued the one we used here, this new option is even better Jacki. Thank you for watching and asking, have a great week my friend. mad Mike the hammer SPC

[@saulberger2232]

What is the brand name of the repair kit you demonstrated so nicely

[@SweetProjectCars]

Well Saul, they discontinued the one we used here, but we use this one now amzn.to/3iV1ueI and it actually works better. Thank you for watching and just a reminder, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, see here 3c5.com/4u6dj if you can't find it let us know and we will help you. mad Mike the hammer SPC

[@russellnentwich8745]

You did an amazing job on that repair. I am going to look for your dash repair video. I bought a 79 Monte Carlo and it needs a good bit of repair work. I was about to buy all new interior. Looks like I may be able to salvage some now.👍🏻

[@SweetProjectCars]

Glad it helped! Thanks for sharing, we appreciate it very much! Have a fantastic day. mad Mike the hammer SPC

[@coriemeyer150]

Hi Mike Wondering the name of the kit that you used on this project and where can you buy it? Thanks

[@SweetProjectCars]

We use this one now Corie amzn.to/3iV1ueI they discontinued the one we used in the making of this video, but found this one works better. Thanks for watching and asking, have a fantastic week my friend. mad Mike the hammer SPC

[@dougbrennan8185]

Hello. How can I remove a poorly applied vinyl patch that was done using the 3M kit?

[@SweetProjectCars]

You are probably going to have to use some heat, we suggest using this amzn.to/2I8XFRh You have to be very careful and slow warming it up the just use these amzn.to/3XEE8vC to pull the patch off. Remember, slowly warm it up and remove. If you are not comfortable doing this, you need to take it to a detail shop. Hope this helps Doug, thanks for watching. mad Mike the hammer SPC

[@kcdaniels58]

Great fix....looks SWEET !!!!! Looking forward to the dash repair video...I have some cracks I would like to take care of 👌👌👌

[@SweetProjectCars]

Good deal the dash that we’re actually doing is the plastic dash in a 2009 GMC Yukon it will be a good video with lots of tips and tricks to do most any dash out there

[@daytonkeyes84]

@SweetProjectCars is it possible to repair a vinyl top on an older car using one of these kits?

[@SweetProjectCars]

See these videos on that subject Dayton kzbin.info/www/bejne/iXrQgJuofbZ5d6c & kzbin.info/www/bejne/q5Csf5aYabeUZq8 Thanks for watching and asking, hope these help. Have a great day my friend. mad Mike the hammer SPC

[@daytonkeyes84]

@SweetProjectCars thank you for replying. Those videos give me some ideas. The car I am working on is a 1968 Oldsmobile Toronado with a vinyl top. Most of the damage is similar to the seat repair damage I watched in your videos. No vinyl repair guy around here will touch it. Replacement of the top, by a professional, is quoted at a minimum of $1500.00...I think trying a repair is worth the try. All the damage is centered on top in an appropriate 3 Sq foot area. I think if I vinyl repair the damaged area and dye the entire top, it will turn out OK. Worth a shot, anyway. I live in central Illinois, wish your shop was closer, lol. BTW, I really enjoy your videos.

[@rp9674]

I'm going to try to match Fiat 500e white interior, which is almost cream color. I think I'll follow the tan instructions but use a toothpick for the brown and yellow.

[@SweetProjectCars]

Thanks for watching and sharing, have a great week and all the best on your project. mad Mike

[@rayjones3212]

Mighty cool work. It sure did the trick for that small tear / scratch. Good Job, Mike.

[@tundrajt]

Love all the info on leather seat repair you have provided! Between the two previous videos and this one, I am dying for Spring to come so I can try it all out on my project Yukon XL.

[@apkeeney]

what about doing this near seams or on edges or corners of the seat?

[@SweetProjectCars]

Give it a shot, we've had success on all areas doing this process. You have all to gain my friend. Thanks for the view, have a great day. mad Mike

[@kevinbrown8493]

Would this work for the top part of the door panel in my jeep ?

[@SweetProjectCars]

Yes it will Kevin. Thanks for watching and asking, we truly appreciate it. Have a great day. mad Mike the hammer SPC

[@rp9674]

I'm trying to use one of those kits on a large area, it's pretty much hell. I'll prob have to redo w silicone, bonding & spray paint

[@SweetProjectCars]

Here's a couple videos on it kzbin.info/www/bejne/jGmbaJaZo7dli68 & kzbin.info/www/bejne/nXqTZZiujLqegas and if this doesn't work for you, you are probably going to have to buy a new seat cover my friend. Thanks for watching and sharing, have a fantastic day and all the best on your project. mad Mike

[@jasonpahos1433]

Very nicely done. Thanks for the tips. I will attempt my seat now

[@SweetProjectCars]

You can do it Jason! Thank you for watching and sharing, have a fantastic day and all the best on your project. mad Mike the hammer SPC

[@strangerdanger4212]

Always wondered if those kits worked, now I know. Awesome job

[@JulieStolp]

I may have missed it, what is this kit, where do I find it??

[@micheldescoteaux7192]

Well that's great I love the repairs what is the kit name / manufacturer 🤔

[@SweetProjectCars]

The one we show was discontinued, so we found this amzn.to/3iV1ueI and it's even better, Michel. Thank you for watching and asking, have a great day. mad Mike the hammer SPC

[@NazVick]

What do you mean "not bad!"!! That was Sweeeeeet!! Awesome result, Mike! Thank you buddy.

[@luisargueta2615]

I just want to say thank you guys so much for this videos, they're extremely helpful. Great stuff well explain.

[@jamesk7410]

Awesome!!! I just found a permatex vinyl repair kit about to go into the dumpster hopefully the colors are all good? I love the video!!! I am about to start filming some youtube videos I have a bunch items about to fix up if I don't make a profit hopefully I break even and it helps someone on youtube.

[@NormEZ]

Thank you for always presenting your topics in a simple and easy manner to understand. I love your "You can do this" attitude. Merry Christmas Hammer.

[@chrystalbazan9756]

does this work on a faux leather recliner with cat scratches?

[@SweetProjectCars]

It will work good for that Chrystal. Thanks for watching. mad Mike the hammer SPC

[@C1tyground5155]

How do I repair a hole in roof liner,it’s the size of cigarette burn but it’s not.

[@SweetProjectCars]

Check this out brian kzbin.info/www/bejne/jZLFpY2BgMdorck it will get you pointed in the right direction. Thanks for watching and asking, have a fantastic day and all the best on your project my friend. mad Mike the hammer SPC

[@HUBBABUBBADOOPYDOOP]

Awesome- my '89 GM has a small dashboard crack, and I'll be waiting for your SPC How-To Repair video.

[@bobhenn1692]

I saw your note that you don't get notifications on postings from old shows. The car wash put some bad scratches in my windshield on Saturday. I watched your video (who else would I turn to?) on using pumice and rubbing compound to remove scratches. I don't have a rotary DeWalt, only a DA polisher. I can get all the supplies you listed, but can I get it to work with my DA? It's expensive to buy a rotary just for my windshield. Keep em coming my friend. Merry Christmas.

[@SweetProjectCars]

Hello Robert have you talked to the car wash about the damage they did? They may Pay to have a new windshield installed. Also you can try your DA and see how it works for you you can rent a single action if you need to.

[@harmandeepsharma7386]

sir, can this item also helpul for repearing leather jackets?

[@SweetProjectCars]

It's worth a shot my friend, sounds like you've got nothing to lose and all to gain. Thanks for watching. Have a great day. mad Mike the hammer SPC

[@JosieBaglio]

What is the name of the kit your using to repair small rips in vinyl or leather and from what company?

[@SweetProjectCars]

Hello Josie, they discontinued the one we used in this video, we use this one now amzn.to/3iV1ueI it's the best we've found and even better than the one shown. Thanks for watching and asking, have a great week. mad Mike the hammer SPC

[@jeremiechaltiel4311]

Hello, nice video! Can you tell please the name of the product that you are using? Thanks

[@SweetProjectCars]

You can find all the tools and products my friend in the show more of the video description they are all listed there if you cannot find this area let us know we will help you out

[@matiasdmichael]

Hey mike, where can i find more of the backing cloth? I have like 3 parts where the seat is torn nd i need more backing cloth there is some patches that u just stick on the holes but will they have the same results? If u can help where i can get the backing cloth i would appreciate it i got the 3m kit to repair hole but i need more to cover the other 2. Thanks Mike

[@SweetProjectCars]

This is what we use amzn.to/3p5792M Thanks for asking Mike! Have a great day my friend. mad Mike the hammer SPC

[@matiasdmichael]

@@SweetProjectCars thanks as always.

[@williskara]

Would this work on a dash in the car? I am unsure the material my dash is made of, but feels like leather or vinyl. It is soft and textured. Thanks!

[@SweetProjectCars]

give it a try and see if you like the results

[@donpace6405]

Just bought the kit I hope it works

[@SweetProjectCars]

Just take your time and follow the video Don. Thanks for watching, have a great day and all the best on your project my friend. mad Mike the hammer SPC

[@baileighpitts5653]

It says that this product is out of stock. Do you have another kit you recommend?

[@SweetProjectCars]

We also use this amzn.to/3iV1ueI Thank you for watching and asking Baileigh, have a great day. mad Mike the hammer SPC

[@nicolasboukas6491]

Can you tell me we’re I can buy that kit please, I have a vinyl black door panel I would like to repair, great video, thank you

[@SweetProjectCars]

here it is amzn.to/2QBWpva

[@claudesmoot1880]

The leather repair kit is not available on Amazon.

[@SweetProjectCars]

We are using this now Claude amzn.to/3iV1ueI Thanks for watching, have a great day my friend. mad Mike the hammer SPC

[@thearrow5793]

Hi....I like the all video and ways you do....every day a new awesome idea....thanks 😁😁😁😁👏👏👏👏👏

[@sandramaselli]

Do you have to put the patch on? Can you just dry it with a hairdryer?

[@SuperJoes70]

In the first part of the video using the heat gun how long ? thanks again another Oscar wining video

[@SweetProjectCars]

SuperJoes70 about 3 minutes to dry the white glue. is this what you were referring to my friend ?....mike

[@richardshirk1124]

I just have one question; My vinyl has a slit about the same size as this one and is black, but there’s no texture it’s just smooth. How do I finish it off? Could I just dull the glue with my finger and lightly use a black sharpie to fill it in? Also on larger jobs, is that regular spray paint that they are spraying the seats with?

[@SweetProjectCars]

richard your suggested method will work great and for larger job we use this amzn.to/31CXEMs or this amzn.to/2XgiORk

[@cmsweitzer1]

Great video, do you have a recommended way to do a flat black leather patch. I have a small tear in the leather of the gear shifter of my car, the black is a flat, no shine.

[@SweetProjectCars]

Yes you will do it the same way only you will put patch material underneath the tear and use the mending glue to seal it up it can be a bit difficult sometimes

[@galloarepa]

Seen a couple of videos and wanted to ask. What is 99%? and what is the name of the Kit?

[@SweetProjectCars]

Here they are amzn.to/3iV1ueI & amzn.to/2YxZg9u and just a reminder, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, see here 3c5.com/4u6dj if you can't find it let us know and we will help you. Thanks for watching. mad Mike the hammer SPC

[@HeyHowLee]

Do you recommend this on a vinyl window that's more of hard plastic? If anyone can help please .I do Windows and guys are always tearing up the vinyl frame.thx

[@SweetProjectCars]

tom kav we would use this on hard vinyl window frames amzn.to/2I68Vi6

[@3kidsdadny]

I have this kit. Can I take my color concoction and apply it with your other video seat restoration with the lacquer thinner? Saves me from trying to color match with a whole spray can of paint. Hoping the answer is YES! :)

[@SweetProjectCars]

K Lee you will want to do this series #1 kzbin.info/www/bejne/qKKVnGx-rM-Gprs #2 kzbin.info/www/bejne/i6uydad_lq-FmNU #3 kzbin.info/www/bejne/jGmbaJaZo7dli68 before attempting this seat repair. these will really help you, my friend !!

[@3kidsdadny]

Sweet Project Cars thanks for the list of 3 videos to re-watch. I think this kit is good to use as a substitute to spray paint because color matching with codes can vary a lot through fading and wear. Your videos use so little color to mix into the silicone that it almost seems wasteful to buy a whole can when I can mix up a color and make some repairs at the same time . Also awesome is the container to keep extra paint handy. A big thank you!

[@MindMetalworks]

alright cheers mate but what is the name of the bleed'n kit?

[@SweetProjectCars]

this is it amzn.to/2QBWpva

[@MindMetalworks]

@@SweetProjectCars cheers

[@dougsnyder3242]

What is the name of the repair kit and where do I buy it...thanks

[@SweetProjectCars]

This is what we use amzn.to/2QBWpva All of the tools/products we use in our videos can always, always be found in the SHOW MORE of our videos description. Thanks. mad Mike the hammer SPC

[@nataliekalandadze6338]

Hi Mike, thank you so much for the helpful video! I've bought the kit, and mixed the color repair compound. I'd like to use the same mix but it's too dry. How can I make it softer again? Thank you in advance!

[@SweetProjectCars]

do you mean the colors are too dry?

[@nataliekalandadze6338]

@@SweetProjectCars Yes, sorry I didn't make it clear :)

[@nataliekalandadze6338]

I mean I've already made a specific mixture of colors and I need to use that shade again but it has gotten too stiff to use it.

[@CAPTAINJ777]

I had a bad tear in my king ranch leather, and though the leather is compromised anyway it’s dry and not in great shape. I was able to use a product like this and it did a pretty fair job of repairing that terror so yeah you know if you have Material that’s in good shape. You should be able to make a nice repair. And if you have like I did material that’s in really bad shape. You can make a just fine OK repair with it and that was a year and a half ago and it’s holding strong so yeah, don’t hesitate to try it, but you have to have a little bit of artistic flare to make a beautiful repair seamlessly. If you know what I mean it’s going to take more than just backyard. Joe you’re gonna have to have a little artistry and understanding colors and matching and mixing possibly and, and just that kind of thing. I would recommend that you practice on a piece of material a time or two so that you get a feel for how it works before you try to do it for real on your vehicle.

[@SweetProjectCars]

Glad we could help! Thank you for watching and sharing, we appreciate it, hope you have a great day. mad Mike & team

[@sandraprosineckiy.1981]

This is amazing. Thank you so much. I have differrent items for repair but I dont have the clothes pieces there. Do you know where I can get them? Thank you!

[@SweetProjectCars]

any piece of cloth will work even from an old t-shirt

[@sandraprosineckiy.1981]

@@SweetProjectCars wow, thank you!

[@brianhayworth]

Any suggestions for when the damage is at the seam? I have an office chair where the seam came apart (approx 3 inches) dead center on the seat.

[@SweetProjectCars]

Other than taking the cover off and repairing on the back of the seam your only alternative is to replace with new. Thanks for asking, hope this helps. mad Mike the hammer SPC

[@MrCougar214]

@Sweet Project Cars, I have a request for that upcoming video on fixing broken dashboards. I have an old 05 caravan that is suffering from shrinkage!.....lol. I know where your mind went on that one, don't lie!....lol. But in all seriousness, Due to the constant sun beating our dashboards take through the windshields of our cars, the dashboard around the top of my air vents in the center of the dash(3 air vents) has shrank and pulled away from the vents. The pleather, foam, all of it has shrunk and pulled upwards from the vent housing so it "looks" like it has the wrong dash parts installed but it doesn't. I wish I could post a pic so you can see exactly what I'm talking about but hopefully you know exactly what I'm dealing with. Is there a way to fix this? Can you find a dash like this and add a fix for it to your upcoming vid? Thanks bunches if you can! And as always, you guys rock!

[@SweetProjectCars]

MrCougar214 lol on your pun and you can send pics to us at [e-mail] thanks mike

[@MrCougar214]

@@SweetProjectCars Cool. I'll grab that pic and send it your way.

[@quicktube87]

Hi when you say "they give you" all these things "it" comes with etc Who are they and where do i get "it" from ?

[@jadiegirlcatsmith3257]

The links to what you need are in the description.

[@SweetProjectCars]

The SHOW MORE of the video description are they :) Thanks for asking and have a great day! mad Mike the hammer SPC

[@SweetProjectCars]

Good lookin out Jadiegirlcat! Appreciate the help! Have a great day! mad Mike the hammer SPC

[@paulinemontague1364]

What is the name of this kit and where can I buy it?

[@SweetProjectCars]

It's this amzn.to/2QBWpva Thank you for watching Pauline, we appreciate it. Have a fantastic day. mad Mike the hammer SPC

[@dandonovan7328]

? Was the textured pease part of the kit?

[@SweetProjectCars]

dan yes it was

[@cku235]

I did not hear the name of the kit you are using ?

[@SweetProjectCars]

We recommend and use this amzn.to/3iV1ueI they discontinued the one in the video, so we are using the one we tagged here now. Thank you for watching Ron, and just a reminder, all of the products/tools we use in our videos can always be found in the SHOW MORE of the videos description, if you can't find it let us know and we will help you. mad Mike the hammer SPC

[@NoahJolet337]

Does this kit come with the heat tool or no?? I just ordered it

[@SweetProjectCars]

Noah, the heat gun is separate, this is the one we use amzn.to/2QULWKK . Hope this helps. Have a great day. mad Mike the hammer SPC

[@chrism364]

Was glue sopose to come in the kit

[@SweetProjectCars]

yes all the tools and glue are in the kit my friend

[@dmitrynt]

How about doing a video when you have to match colors, like grey. Would like to see how well it looks

[@SweetProjectCars]

I will see what we can do for you my friend

[@jesusmoreno9744]

Will this work on vynle top?

[@SweetProjectCars]

This works on all leather or vinyl Jesus! Thank you for watching and asking, have a great day. mad Mike the hammer SPC

[@ericmiller8377]

what is the name of the repair kit??

[@SweetProjectCars]

We are using this one now amzn.to/3iV1ueI They discontinued the one shown, Eric. Thank you for watching and asking, have a great day my friend. mad Mike the hammer SPC

[@MissingLinkMTB]

Had a very similar kit from Permatex. The iron didn't have to be heated because it plugged into the wall outlet! Short cord and the iron was the same size as the one in your kit. Can't find that one anymore and I lost mine.

[@IrshadKhan-ey1ll]

It's on Amazon for like 15 to 20

[@WatchDesigning]

What is the name of the kit? Thank you

[@SweetProjectCars]

This amzn.to/2QBWpva is what we used. Thank you for watching and asking. Have a great night. mad Mike the hammer SpC

[@theamjadjamousable]

got one today , gotta repair my favorite jacket scratch .

[@SweetProjectCars]

Nice thank you for sharing! Have a great day. mad Mike the hammer SPC

[@redtango75]

Nice kit and demo as always. I don't know if you take requests but... my rim center caps keep coming off. The tabs are all there but time has taken its toll. Any ideas?

[@SweetProjectCars]

Chad B please send us some pics so we can better analyze send to [e-mail] thanks mike

[@jimkarafa5853]

Mike, great videos!!! Any advice on how to deal with extremely slick car seats? 2005 Audi A6 leather seats are in very good shape except they are getting more and more slippery. Same for my steering wheel. I've cleaned and conditioned with no real difference.

[@SweetProjectCars]

Jim karafa what we do is run some 3000 grit paper over them helps alot

[@jimkarafa5853]

Thanks, I'll give that a try. Someone also recommended I try a magic eraser.@@SweetProjectCars

[@SweetProjectCars]

Jim karafa we have tried that and it has not worked for us my friend

[@chelssyveatch3635]

What am I doing wrong? During the heat treatment the damage continues to get worse.? Like it's melting the leather

[@SweetProjectCars]

Well I am going to say that you may not have leather it may be leatherette and of course you do not heat the tool up too hot you wanted about as warm as you would use it to do ironing of clothes can you send pics of your material to us Our email is on our channel description

[@tonymatani2537]

what is the brand name of this kit?

[@SweetProjectCars]

This is what we use amzn.to/2QBWpva Thanks for asking. Have a great day. mad Mike the hammer SPC

[@hristoganev837]

Do you have an idea why the grain paper was so sticky after i tried to peel it off ? I waited even 30 min at my second try and still everything was ruined because of sticky grain paper

[@SweetProjectCars]

i know the paper can only be used once next time put an ice cube in a ziploc bag and rub it on the paper after you have done your heating

[@hristoganev837]

@@SweetProjectCars thanks I will try it

[@stephengordon8968]

Hey that came out perfect , I'm impressed great job !

[@walterkersting9922]

Maybe better than green paper would be a way to take a negative imprint of your actual grain and utilize that

[@SweetProjectCars]

Thanks for the view and comment, have a great weekend. mad Mike

[@pamparker4047]

Name of kit you used

[@SweetProjectCars]

Hello Pam, they discontinued the one we used in this video, but now we use this amzn.to/3iV1ueI and it's way better. Thank you for watching, and just a reminder, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, see here 3c5.com/4u6dj if you can't find it let us know and we will help you. Thanks for watching. mad Mike the hammer SPC

[@samhicks97]

I made a small tear on my 64' Dodge's bench seat, got so pissed off that I ruined an original seat. Thanks for the video, going to use this as reference.

[@SweetProjectCars]

Glad we could help, sorry about your seat :( This will work, just follow the process explicitly. Have a great day my friend. mad Mike the hammer SPC

[@samhicks97]

@@SweetProjectCars Thanks again, Mike. looking forward to using this repair method.

[@TLane]

So what's the kit called?

[@SweetProjectCars]

This is it amzn.to/2QBWpva Tony, and remember all of the products/tools we use in our videos can always be found in the SHOW MORE of the videos description. Thanks for asking and watching. Have a great day. mad Mike the hammer SPC

[@SlowBoiGang]

The seats at 1:10 are different. Just look at the backrests. Why is that?

[@SweetProjectCars]

Small Town Loner thats because you are looking at the driver and passenger seat you need to see the other videos in the series to see how everything came out so perfectly series #1 kzbin.info/www/bejne/qKKVnGx-rM-Gprs #2 kzbin.info/www/bejne/i6uydad_lq-FmNU #3 kzbin.info/www/bejne/jGmbaJaZo7dli68 before attempting thanks mike

[@SlowBoiGang]

@@SweetProjectCars ah ok. Will do bud

[@hamzajanooo6861]

Can u help why my grain paper sticks with leather :( please help

[@SweetProjectCars]

Yes, you have to let it stay on longer, you must be pulling it off too soon. Also, make sure you are heating it up well. Thanks for the question, hope this helps. Have a great day. mad Mike the hammer SPC

[@hamzajanooo6861]

Thank u i will try again

[@tonyneises5195]

Saaweeeet little kit. Thanks so much for sharing.

[@MurphyMower]

i missed it- what product is this?

[@SweetProjectCars]

Hello Lee, all of the products/tools we use in all of our videos can always be found in the SHOW MORE of the videos description, if you can't find it, let us know and we will get you pointed in the right direction. Thanks for watching. Have a great day. mad Mike the hammer SPC

[@frankziccarelli1724]

Gotta say, you do first class work! That small repair looks terrific! I'm going to order that kit for a couple of small blemishes on my own car. Great advice and kit review, thanks for sharing your knowledge and experience ! 10 +++ Sweeeeeets for you!

[@SweetProjectCars]

Frank thank you very much mike

[@toddkilpatrick217]

Where can you buy this kit

[@SweetProjectCars]

Todd Kilpatrick all the tools are in the "SHOW MORE" of the videos description but here it is amzn.to/2QBWpva

[@benharrison1069]

Another cool tip, Mike! That looks lik a repair kit worth having. Thanks for the demonstration. Would a hair dryer work as well as the heat gun? I do have one suggestion for you, Mike. You were really getting the jitters while mixing up that paint. Seriously, my friend, you need to cut back on all the coffee you've been drinking. :-)

[@SweetProjectCars]

Ben you can try a hair dryer and see if it gets hot enough it needs to be around 200F LOL on the coffee, speeding up the process with the video editor makes it look crazy sometimes :) thanks for sharing mike

[@pattymccarthy3128]

What is the name of the kit?

[@SweetProjectCars]

We use this amzn.to/3iV1ueI they discontinued the one we used in the video. Thank you for watching and asking, Patty, have a great day. mad Mike the hammer SPC

[@b26leather29]

Nice job done, I do similar work on sofas. Keep up the good work

[@phillipbarreda4580]

Let us know the name of the repair kit

[@SweetProjectCars]

Phillip all the tools are in the "SHOW MORE" of the videos description, but here it is amzn.to/2QBWpva

[@Leonardokite]

Good to see that the wife has taught you to do the ironing.......hahahaha Wow, that puppy disapeared! Amazing. BTW the other thing a DIYer needs is a big shop with lot of storage!

[@SweetProjectCars]

Yeah she was not impressed when she came out to the shop and found it sitting on a dirty work bench LOL

[@SweetProjectCars]

Oh and I just read your part about lots of storage I am with you on that we throw nothing away because we never know we may need it and when we do throw something away we wish we wouldn’t have because then we needed it so you need a boat load of storage your exactly correct my friend

[@dontderockmeriz4546]

This’ll be great for my leather couch. It takes a beating.

[@walterkersting9922]

I would think you could use a bigger piece of backing material

[@SweetProjectCars]

You can do whatever you want to do for your situation. Thanks for watching, have a great day. mad Mike

[@jerryhage2293]

ok how do i order the kit you are using?

[@SweetProjectCars]

This is what we used Jerry amzn.to/2QBWpva thanks for asking. Have a great day! mad Mike the hammer SPC

[@jaya.0069]

Thanks for this awesome repair video, good for my recliner repairs when needed!

[@johnmilner7603]

I only need black so these kits are overkill for me to fix very small wear spots in my car seat piping.

[@SweetProjectCars]

Hello John if you look around you might be able to find just black most do not sell it because they know most people only need black but for the price of the kit it’s not bad have a great night mike sweet project cars

[@johnmilner7603]

Sweet Project Cars I found some black in a small tube and for the same price in the glass jar.