How to replace a broken wheel stud or wheel hub (Hyundai Elantra)

[@sylentagenda9160]

Thanks A LOT my man! You saved me $165 for the local mechanic to do the job. Did not think it would be this easy. Great video.

[@GetOutTheHouseGoFish]

That’s what I like to hear 👍 Your welcome 😃

[@ryangerrietts8513]

I found a video where someone took washers and a lug nut and tightened the lug to the new stud and basically pulled it through until it was flush. Pretty cool! May save some time taking the hub off! Love the video though. Thank you!

[@GetOutTheHouseGoFish]

Oh that’s a good idea with the lug nut and washers👍 Glad you loved the video 😃

[@2012YoutubeWasBetter]

As a rather small mechanic i prefer this method. Hate smashing my fingies hammering on bits i know im barely strong enough to get through

[@kelvinbriggs1107]

i know im asking the wrong place but does someone know a method to log back into an instagram account..? I stupidly lost my account password. I would love any help you can give me

[@everettrory2825]

@Kelvin Briggs Instablaster :)

[@kelvinbriggs1107]

@Everett Rory thanks so much for your reply. I found the site through google and Im in the hacking process now. I see it takes a while so I will get back to you later when my account password hopefully is recovered.

[@leothelion2001]

Thank you so much , I was about to replace the whole hub over a broken stud, saved me some money for sure lol

[@GetOutTheHouseGoFish]

That’s great to hear 👍

[@danielbustos9932]

Front passenger I took the break and the rotor off but the back plate is too close to the wheel hub to where you can't knock the stud out befor,e it runs into it much less put another one in how do I do

[@STR8CLAPPINCHEEKS]

If only those Phillips heads came out that easy.

[@yungjamie794]

Just earned my self $200 very helpful video!

[@bre7473]

Thank you for your video and taking the steps slow. I really needed this, thinking out doing this myself

[@GetOutTheHouseGoFish]

Your welcome. The back tires aren’t bad but if it’s the front tire you’ll have to take it to a shop. This model car seems to break them all the time. It’s my daughters car but when she went to have a front lug replaced it cost her under $300 to get it repaired.

[@nathankdean]

Bro thank you🎉🎉🎉 this is actually real stuff that helps people you save me a lot of money today

[@GetOutTheHouseGoFish]

Glad it helped 👍

[@aardvarkgroup2300]

Easy and worked! Thank you so much for the video. Fixing my son's car.

[@GetOutTheHouseGoFish]

Great to hear; glad it helped

[@Smile-uwokeup-2day]

Thanks for this vid my Elantra is 2011 one stud broken but am waiting to get rotors before I replace it

[@GetOutTheHouseGoFish]

Your welcome; glad it helped.

[@todhamilton5055]

Great video clear easy to understand and well shot. Much thanks.

[@GetOutTheHouseGoFish]

Glad it helped

[@brett3723]

Nice video first one I watched and got the job done without watching 5 other vids

[@GetOutTheHouseGoFish]

Great to hear 👍😊

[@shachardamari7550]

Thank you! an amazing video. which grease do you use for the stud before its installation? TNX!!

[@nicolebailey3164]

What type of grease do I need to get to install the studs any in particular?

[@danielocean1258]

Got a 2010 elantra w broken lug bolt. Took both 14mm bolts off. Caliper still connected by 2 screws 11/16. Do I remove also? Kinda stuck !

[@GetOutTheHouseGoFish]

Get that caliper off

[@danielocean1258]

By prying or removing the 11.16 not a snug fit nor 5.8. Are they 2 bleeder screws which need that special head ?

[@Smile-uwokeup-2day]

Very informative vlog here thanks . I have a 2011 Elantra that needs to remove one stud in right ear . I buy 5 to take to a shop that charges $50.00 for doing one but says it’s same to replace all 5. I did da brakes my self few months ago . I think I gotta go get some more tools for this work . As u show here . Thanks

[@GetOutTheHouseGoFish]

Thanks; glad it’s gonna help 👍 Wasn’t too bad of a diy project.

[@Smile-uwokeup-2day]

@@GetOutTheHouseGoFish #SOTRUETHAT

[@Smile-uwokeup-2day]

My car is a 2011 stud broken off n I don’t have sledge hammer only little one . How much does new hub cost

[@kingtymoney]

This was a huge help, thank you so much.

[@GetOutTheHouseGoFish]

Glad it helped; your welcome.

[@vinzzrevell8457]

Lmfao your hub is so easy to deal with on my 2017 elantra se it has all those covers and no holes x( had to bust the hacksaw out geez but still thank you

[@GetOutTheHouseGoFish]

Well glad it helped somewhat 🤷🏻

[@Elifilmedit]

The screws for the rotor will not come off I’ve tried 15 dam screw drivers what do I do

[@krisfriesen204]

Ok how did you get those philips head screws out without stripping them?

[@GetOutTheHouseGoFish]

? I sprayed them with a lubricant; use PB Blaster that works really good 👍

[@ricobennett5598]

Use a manual impact driver

[@krisfriesen204]

@@GetOutTheHouseGoFish thanks it worked.

[@Ap-nv1hk]

Buy a cheap impact screw driver from harbor freight they are like 8$

[@Ap-nv1hk]

Basically whay you want to do is apply pressure as you turn the screw driver as well as hitting it with a hammer

[@danielocean1258]

Don't know what exact model I got but completely different configuration. No space to hammer bolt through. It doesn't swivel because I have an inch nut n and not empty space.

[@jehoiachinprice7946]

Get another set of lug nuts and use the old ones to pull the stud through with an impact no hammering needed

[@kaskadesmoney]

GODDAMNIT I DID IT THE HARD WAY. BUT YOU'RE GENIUS

[@markAaronDrake]

Thanks! I worked!!

[@GetOutTheHouseGoFish]

Great to hear 👍

[@Spiral232]

Thank you for this great video.

[@GetOutTheHouseGoFish]

Glad you enjoyed it; hope it helped

[@darrionjohnson2848]

just saved me $700 thanks!

[@GetOutTheHouseGoFish]

That’s what I’m talking about 😃👍

[@raptorav1]

Brass Hammer saves a lot of dings on stud and surrounding surfaces...

[@gilbertvalencia8382]

Thank you so so much for yiur consideration ti help others save money thank you

[@GetOutTheHouseGoFish]

Your welcome 😊

[@FourthWayRanch]

You can damage bearings hammering on the hub like that

[@irisbaez1972]

Is it dangerous to re-use the front old hub? People recommend using a new one. Mine is free rust and 154 K miles only.

[@GetOutTheHouseGoFish]

That’s a lot of miles and I’m he hub isn’t that expensive if purchased online.

[@irisbaez1972]

@@GetOutTheHouseGoFish . got you. I did it. Did the whole job for the first time. new bearing and new hub. two hubs cost me $54 and bearing $42 for two.

[@irisbaez1972]

@@GetOutTheHouseGoFish Now replace the harmonic balancer and still the vibration.

[@GetOutTheHouseGoFish]

@@irisbaez1972 probably need an alignment. Also check tires for uneven wear. Try putting the front tires to back and back to front and see if there’s a difference.

[@irisbaez1972]

@@GetOutTheHouseGoFish Nothing of all that fixes anything. I have two years with this problem and I have replaced everything I can imagine. I have dome everything people have told me here on youtube. I took it to the dealer and see what happen. Money, pain, sweating, wasted time, and still there. How much I would save if I took it to the dealer from the beginning?

[@accidentalinvestments9776]

Sub well earned my friend

[@GetOutTheHouseGoFish]

Thank you

[@CosmicCreationsDIY]

Tighten new Bolt and will pull the stud Bolt through so don't need to remove

[@GetOutTheHouseGoFish]

Thanks for the info 👍

[@jrevolutionz]

What is the year and model?

[@GetOutTheHouseGoFish]

I tell you at the beginning of the video?

[@ReyLaFleur]

On older ones just cut 2 slits into the heat shield behind the hub, bend the tab you've made back, replace the stud and bend it back. $2 stud and 15min job start to finish!

[@hemantgautam6678]

Thanks 🙏

[@gilbertvalencia8382]

Sir you have a big heart thank you Many many Blessings Vaya Con Dios

[@GetOutTheHouseGoFish]

Your very welcome 👍

[@irisbaez1972]

Don't even need to remove the hub to replace the studs.

[@Cunnilinguy]

I have to, I am smacking away and on the inside the shield crap is blocking it

[@operatorodin1006]

Pro tip instead of removing hub put a nut on the stud and tighten down to they pop in

[@dannyayala3060]

Thank you!!

[@GetOutTheHouseGoFish]

Your welcome 👍

[@dannyayala3060]

@@GetOutTheHouseGoFish Hey I was unable to knock out the wheel stud because of something behind it. And I was looking at other 2016 Hyundai Elantras and they don't seem to have the problem with removing a wheel stud, They can easily knock it out. Did you end up having problems with any other Elantra cars involving that? (P.S. send help!!)

[@GetOutTheHouseGoFish]

@@dannyayala3060 take the hub off to knock it out

[@highlandsoutdoors2041]

you do not have to remove the bearing you put a big bolt over the stud and torque down the actual wheel nut on top of it and it will pull it in

[@sentar6969]

I get the people don't know the difference between bolts and studs but that doesn't make this any more correct to have this under bolts cuz there's other parts of the car that actually need bolts pretty much most of the any other part of the car maybe if that was explained in some other videos people would stop looking up bolts for in place of studs on carsThe big difference there is no other end the end on one end is the same as the other of a stud

[@GetOutTheHouseGoFish]

Thanks for the input

[@youtubesque]

need same tutorial for the front wheel

[@robertforbes8873]

Torque?

[@MrPENCOFF]

This is only for the back wheels the front wheels are way more harder

[@GetOutTheHouseGoFish]

Correct 👍

[@BrokeJoker04]

Lol this is the rear wheel!! Why can’t someone do a front wheel?

[@GetOutTheHouseGoFish]

Most peeps don’t have the tools to do the front wheels. This is my daughters car. She had one break off on her front wheel and I told her she will have to take it somewhere. Cost her less than $300 for the repair. What’s up with these constantly breaking off on these model of cars? Good luck 👍

[@lei2valid809]

Save me 300 dollars for 2 broken studs both drivers and rear

[@gusferguson8353]

You're suppose to pull the hub off so you aren't destroying the wheel bearing by beating on it. Just saying!!!

[@GetOutTheHouseGoFish]

Still going strong 😆 thanks for looking out 👍

[@STR8CLAPPINCHEEKS]

If only those Phillips heads came out that easy.

[@GetOutTheHouseGoFish]

True