How to Replace Rear Wheel Hub 2011-2016 Hyundai Elantra

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com trq.video/ib-1...
New Wheel Bearing & Hub Assembly Set from 1AAuto.com trq.video/ia-1...
This video shows you how to install a wheel hub on your 2011-2016 Hyundai Elantra. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This repair was done on a 2013 Hyundai Elantra GLS 1.8L Sedan 4-Door FWD and the process should be similar on the following vehicles:
2011 Hyundai Elantra
2012 Hyundai Elantra
2013 Hyundai Elantra
2014 Hyundai Elantra
2015 Hyundai Elantra
2016 Hyundai Elantra
Tools you will need:
• Flat Blade Screwdriver trq.video/oaYU...
• Phillips Bit in a Ratchet
• Phillips Head Screwdriver trq.video/oaYU...
• Pry Bar trq.video/oHw-...
• 12mm Wrench trq.video/oKg-...
• 14mm Wrench trq.video/oKg-...
• 10mm Socket trq.video/oaJn...
• 12mm Socket trq.video/oaZm...
• 14mm Socket trq.video/oaZm...
• 21mm Socket
• Brake Caliper Hanger trq.video/obj-...
• Trim Tool Set trq.video/oTg-...
• Pliers
• 1/2 Inch Breaker Bar trq.video/opq-...
• Socket Driver
• Socket Extensions trq.video/oaZm...
• Torque Wrench trq.video/oajp...
• Brake Parts Cleaner
• Cloth Rags trq.video/own-...
• Copper Anti-Seize
• Gloves trq.video/owz-...
• Paper Towels trq.video/own-...
• Grinder
• Sledge Hammer
• Wire Brush trq.video/opx-...
Subscribe: / @trq
Check out our playlist:
Hyundai Elantra 2011-2016 5th Generation: • Hyundai Elantra 2011-2...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@Wrenchingdaily]

Great video. Just finished installing both rear wheel hubs on my 2011 Elantra GLS. I did not have to remove the ABS/speed sensor.

[@jg1468]

What is the gasket called for the wheel bearing you said we should replace?

[@majid2569]

You're perfect teacher

[@shrews12001]

can you not just remove the caliper bracket and take off the whole assembly instead of taking off the caliper by itself?

[@shrews12001]

Just did this. Everything lined up right and all but once it was back in place the wheel didn't spin by hand. I need to take it apart and look again but what would be the reason for that?

[@08DBobCat77]

Need to know what that gasket is you said may need to be replaced. Don't know what to ask for at the parts place. Some videos come with list of tools and all parts making it easy to follow.

[@frederom]

What are the exact size / name of the 4 12 mm bolts holding the assembly? Mine broke off while taking it off😢

[@michaeloreilly4226]

Are these considered press in wheel bearings or not?

[@claddagh1000]

Good but you forgot to put a new backing plate They tend to get rotted and fall off

[@MC-lr7ym]

what is the torque for those 4 hub bolts

[@Terminoplastia]

Thank You.... excellent!!!

[@marvinramireztejada1848]

Thank u nice video

[@artv4nd3l4y]

I suggest you replace it, as we go ahead and reuse the back of the hub part...

[@domenictaraborrelli2]

The old piece from the old hub was once a dust shield that yoU should have replaced.

[@Ihatemushrooms77]

Wish the 2011 Sonata rear hubs are like these. 😑 it's bolted thru the back side and have to remove/loosen lower control arm and shock to get access to the rear 4 bolts

[@TRQ]

+Edgar Herrera Thanks for the feedback! 1aau.to/m/Shop-TRQ