I had no idea how simple of a process this was. Thank you for sharing!
@rutterrealtygcАй бұрын
Glad it was helpful!👍😊
@PamelaCalabrese4 ай бұрын
I wasn't sure if I needed to put the caulk/glaze in on both sides and your video answered my question. Thank you 😊
@rutterrealtygc4 ай бұрын
Glad it helped. Thanks for the comment!👍😁
@AsylumEscapade11 ай бұрын
Glad I found you. The glass broke in our window in our old house, and the window has this groove inside the wood for the glass. I purchased plexiglass to replace the window glass, and I've cleaned out any caulk. Probably should use alcohol and soap as well.
@rutterrealtygc11 ай бұрын
You should probably put actual glass back in… our plexiglass made noise wobbling back and forth when doors opened/closed in the house.😆
@brentjohnson6654 Жыл бұрын
New subscriber here. Thanks for the video. I lost a single pane window and some siding during a storm while I was on travel. Thanks for the video. It gives me an idea how to approach this problem. All the best!
@rutterrealtygc Жыл бұрын
Thank you for the comment and subscribing!👍😊
@kendallterrelll3 ай бұрын
Man, you were great at rubbing that caulk off
@rutterrealtygc3 ай бұрын
😁👍
@CuddleTrouble Жыл бұрын
I was able to buy the vinyl glazing at Ace hardware. I could only find it at Home Depot or Lowes in expensive bulk packages that seem meant for a whole house.
@rutterrealtygc Жыл бұрын
Nice! Many glass suppliers will carry a few types, but the older the window the more difficult it is to find the right kind.👍
@jonathanellis588610 ай бұрын
Nice job Ryan!
@rutterrealtygc10 ай бұрын
Thanks!😊👍
@philiprivera88154 ай бұрын
My window is two sections pane, old apartment window style, the opening section has the internal spring assist. Looks like tabs and metal stip separate the horizontal middle area. Please make a video to show this.
@rutterrealtygc4 ай бұрын
I don’t understand what you are trying to explain, but if I do another window, I’ll put it up here!👍
@naturewatcher7596 Жыл бұрын
I'll go for plexiglass then. Seems to be much easier and safer to install. :)
@rutterrealtygc Жыл бұрын
Every time you close a door you will hear it flex… that’s one of many reasons we got rid of it.
@Perry.Okeefe8 ай бұрын
@rutterrealtygc i was just about to ask why you didnt like it. Since plexi tends to be the more expensive choice.
@Trina198415 күн бұрын
The metal thing that you’re cleaning, that’s holding the glass, what is that called and do you know where I can buy it?
@rutterrealtygc6 күн бұрын
The aluminum window frame? I don’t think they make aluminum window frames anymore…
@andylsasso8 ай бұрын
Hi great video. I live in a 2 floor condo. Can I change the glass by the inside of the condo?
@rutterrealtygc8 ай бұрын
Can you change it from within the condo? Is that what you’re asking?
@andylsasso8 ай бұрын
@@rutterrealtygc yes
@yxhankun Жыл бұрын
excellent teaching.
@rutterrealtygc Жыл бұрын
Thanks!
@kevincastillo21172 ай бұрын
What did you press the glass up against to keep it centered? Was it the caulk? What keeps the glass from just tilting to one side while the caulk dries?
@rutterrealtygc2 ай бұрын
It is resting on the two rubber pieces and should be level. The caulk should hold the glass to the frame after it is pressed into the caulk. The caulk “glazing” should help hold it in place too.
@sherrylusk3744 Жыл бұрын
Where do you get the rubber pieces? And do you know what they're called?
@rutterrealtygc Жыл бұрын
I got them from a glass guy. I don’t know what they’re called. Any little rubber cushion should work. The ones I had were 1/16-1/8” thick.
@divinag.2803 Жыл бұрын
Hello nice work, i just accidentally broke our window. where can we get the glass?
@rutterrealtygc Жыл бұрын
Just do a quick web search for your local glass companies. They should be able to cut the glass for you and also give you an install quote as well (if you didn’t want to do it yourself).
@cdhn20094 ай бұрын
Is there anyway to remove the plexiglass pane without braking it? Mine looks good but seems like the caulk is beyond its life and it has a small leak through it. I am planning just to remove the panel, remove old calking and putting the panel back with new caulk. it is possible?
@rutterrealtygc4 ай бұрын
Plexiglass is not the same as glass… is it glass or plexiglass? It would probably be easier to just caulk where there is a leak. You might be able to get it out without breaking it if you are very careful.
@skullsvalid_99564 ай бұрын
can i use something like pennies to hold up the window if i dont have a rubber peice?
@rutterrealtygc4 ай бұрын
I would be afraid that a hard spacer could chip the glass. Also, you’d have a penny sticking out of your windows.😁
@AndrewMcQuaid-ql3ss5 ай бұрын
I have a windowsill is bowing up due to it not being lined up properly. How would i go about removing the bottom siding so i can adjust it to the correct way?
@rutterrealtygc5 ай бұрын
I really don’t know what you are asking here… you want to remove the siding to fix the windowsill?
@faithlyflores84796 ай бұрын
Where do I measure it from? To see what size glass I need. And did the rubber things stay in the bottom the whole time?
@rutterrealtygc6 ай бұрын
The rubber stays in, yes. You would measure the frame that the glass is going within once the glazing is removed ( I don’t know if that’s any clearer ).🤷♂️
@chrismcclantoc80732 жыл бұрын
Nice work
@rutterrealtygc2 жыл бұрын
Thanks bro!😉
@cassidax5 Жыл бұрын
Do you know how to replace insulated glass panels in newer style aluminum and wood clad windows?
@rutterrealtygc Жыл бұрын
Double pane windows? I have not changed those, no.
@thaonetank8 ай бұрын
I need help please is there something else I can use other then quad osi any other recommendations
@rutterrealtygc8 ай бұрын
This was the product I was recommended to use from a glass installer. I would have to search online for different products that could be used that would be as effective.
@thaonetank8 ай бұрын
@@rutterrealtygc thank I will definitely be using it then if it was recommended great video by the way
@Theangriestfella5 ай бұрын
I accidentally broke a window and didn’t know what to do thank you
@rutterrealtygc5 ай бұрын
I accidentally broke a window too swatting a bug.😂 Thanks for the comment!👍
@GlamGoreChaosQueen Жыл бұрын
Quick question! Is the process the same if it's the upper stationary pane? And do the pieces always fit in from the outside? Second story window 😮💨
@rutterrealtygc Жыл бұрын
Without seeing the window, there’s no way that I can know. Typically, if it is a single pane glass window and you can see the glazing on the outside of the window, then the glass will go in from the outside. You can always contact and licensed and insured contractor to be sure! 👍😃
@GlamGoreChaosQueen Жыл бұрын
@@rutterrealtygc I rent 😅 and my property management company is a nightmare.
@noblescrunchie9062 Жыл бұрын
Rubbing alcohol works for cleaning the glass and evaporates itself leaving no residue 😉
@rutterrealtygc Жыл бұрын
Thanks!
@ThingsMen6 ай бұрын
where did you purchase the new glass pane?
@rutterrealtygc6 ай бұрын
Local glass company. I just saved on installation costs.
@lataushadavis6491 Жыл бұрын
Also, which type of glass is better to use?
@rutterrealtygc Жыл бұрын
There are several different types of glass. I think "best practice" is to use tempered glass or laminated glass if the window is below a certain height (I think it is if it is less than 18" off the floor, where a child might hit it or fall through), which will lessen the chance of injury. Definitely contact a licensed and insured contractor though to make sure.
@ericaulloa-ayala71165 ай бұрын
I'm a DIY girl married to a contractor who won't change our broken glass so I'ma do it myself 🤨🤣 thought it was harder than this. It's just scary getting cut.
@rutterrealtygc4 ай бұрын
Lol!😂 Totally know so many of those situations! Why is that a trend? You’d think the contractors would want to fix their own stuff first!😂 Be extremely careful and don’t get cut or hire someone else!! 😊 Best of luck!
@huntersk8n1234 ай бұрын
I 100% can understand is reasoning on not wanting to fix his own stuff as a contractor myself 😆😆😆
@hippo-potamus11 ай бұрын
Who is the "they" that has the 1/8 strip? And why is that needed?
@rutterrealtygc11 ай бұрын
Dying laughing! Who IS they?! My wife always asks the SAME question.🤣 Bad habit. You can contact your local glass store where you get the glass or see if the local box store like Lowe’s or Home Depot has any thin rubber piece to cushion the glass.😊👍
@pilarjusino7261 Жыл бұрын
How do you measure a replacement?
@rutterrealtygc Жыл бұрын
Measure it with the glazing removed and subtract 1/4 inch should leave 1/8 gap around the pane.👍
@RoyaltyMirror2 ай бұрын
Great video; we would like to collaborate on your future window project. Thank you
@rutterrealtygc2 ай бұрын
Sounds Great! Do you supply windows?
@lataushadavis6491 Жыл бұрын
How long does it take to dry?
@rutterrealtygc Жыл бұрын
I was told by a glass installer not to clean it for 24 hours. :)
@r.taylor18225 ай бұрын
how do i get the correct measurements?
@rutterrealtygc5 ай бұрын
Measure where the glass will be sitting after removing the glazing minus 1/4 should leave you 1/8 space on each side. Hope that makes sense. I just needs to not be smaller than the opening.😂
@danielotoole72Ай бұрын
Part of "using caution" when removing the old glass is wearing safety glasses...
@rutterrealtygcАй бұрын
Sounds great!👍
@AQWC8924 ай бұрын
Thanks
@rutterrealtygc4 ай бұрын
You're welcome! :)
@melzariodesign Жыл бұрын
Seems like a "paneless" procedure 😅 get it? Pain-pane..less.....aaaaaaw damn nvm
@rutterrealtygc Жыл бұрын
😆 Good one! 🤣 Love it!
@bellet.broskie-finney Жыл бұрын
Clear caulking/silicone would look better.
@rutterrealtygc Жыл бұрын
The existing glazing on the top pane (and all other windows) was white, which is why I went with white.😊👍
@saylahm00n Жыл бұрын
do we have to use caulk if we have the rubber ?
@shirleyashanti303110 ай бұрын
Awesome
@rutterrealtygc10 ай бұрын
Thanks!
@brittavans Жыл бұрын
Im having trouble get the window out. The metal trim is blocking me from removing it.
@rutterrealtygc Жыл бұрын
I guess mine didn’t have that?
@Pjwilliamson55 Жыл бұрын
Mine doesn't either, the glazing is the aluminum window
@nuclearix69Ай бұрын
Imagine the insulation on that house 😬
@rutterrealtygc23 күн бұрын
Not a lot of insulation with single pane windows.😆
@charleneprints10054 ай бұрын
🎉🎉❤🎉🎉
@rutterrealtygc4 ай бұрын
Thanks for the comment!
@williamgarcia96023 ай бұрын
You don’t go slow enough so I can see everything and you cut the video too much to the final finished job
@rutterrealtygc3 ай бұрын
Thanks for the input!
@jeremyreevessicg221818 күн бұрын
Did you ever consider that KZbin has a video speed??? Yes!! You can watch at a slower speed! Hello
@tamilkings712311 ай бұрын
Anyone silicone Cantu
@rutterrealtygc11 ай бұрын
I don’t know what you mean…
@omegamanzano84933 ай бұрын
I’m a woman and mother single mother and I see you doing an awesome job but I’m not too happy that you did not take measurements of the window so I could see how you did it because I’m trying to fix my windows in my house but if you don’t show me show anyone how to take the measurements of the windows then we’re not gonna get nowhere
@rutterrealtygc3 ай бұрын
Thanks for comment. You see where I’m scraping off the caulk? That’s the metal frame the glass will go against. Take your measurements there or have a glass installer take the measurement for you.👍
@timothyschmid3203Ай бұрын
Well if u can’t measure yourself ?!?!? Maybe leave it to the pros
@PuzzlePrincess33Ай бұрын
@omegamanzano8493 your comment really isn't necessary. As a KZbinr, he's not required to show you any of this. Taking measurements is extremely basic, elementary stuff. If you don't know how to do that, I agree you probably want to contact a professional to take care of it