How To Replace A Shifter/Gear Shift Leaver On A Motorcycle

[@ScopedKilz]

If you're watching this I'm sorry that you went down. It really does suck. But I'm glad that you're in good enough shape that you're looking to fix your bike back up.

[@muhabkasiri6931]

Appreciate it👍, kinda went sliding at 120 mph on my r6 somehow the frame sliders saved my whole bike and gear saved me. But that lever is completely bend!

[@manbiteslife3110]

Thanks mate, nice perspective. I fell with my bike doing 0kmph .

[@GarlicPizzaCrust]

Thanks foo

[@ifyouonlyknew34]

Thank you.

[@hunterdlg32]

@@flemingmacklain2996I lowsided my 2024 zx6r and it broke the gear shifter

[@Kekarrot]

Had my 05 sv650 come off while on the road, coasted home in first to find your video. Thanks

[@c_wonder]

thank you so much. Looking to buy one and saw this piece needed to be replaced so I’m going to haggle the person down some for a simple job.

[@adventureswithwolf2836]

extremely helpful thank you. i just bought my first gxsr1000 yesterday and i needed to learn how to replace this. again thank you!

[@markiewilliamsonlinecourses]

Just changed mine on my Suzuki SV650. Looks like the exact same shifter as mine. Smooth sailing . But that goofy ring is hard as hell to take off‼️ I never knew it was that easy to replace the shifter coming from someone who goes to my older brother for Biker advice . Thanks‼️

[@imranbashir2471]

Thank you so much! I don't have a Suzuki but I do have a Kawasaki and this video Definitely saved me from having to hire a mechanic!

[@beyondroutinefitness-reach9906]

Hey. Do you know if the middle Rod needs to be adjusted to a certain point? I tightened it all the way in and my bike only goes into first gear. No other gear. Should I loosen the rod just enough for it to hold as you said? Is that my issue? Thanks

[@arabmotorcycle8633]

Yes, you need to keep adjusting from both ends and try to shift gears until its in the correct position. It has to be balanced between both sides to shift correctly.

[@beyondroutinefitness-reach9906]

@@arabmotorcycle8633 Thanks. It worked.

[@ques215]

Where did you get this from? I need one

[@texicon]

Link to the replacement gear lever! Thanks for the video!

[@arabmotorcycle8633]

www.motorcyclespareparts.eu/en/suzuki-parts/motorcycles?gclid=Cj0KCQjw-af6BRC5ARIsAALPIlXfzoIc5MY9r0WFQ1Cy-FtaqT0RPSB9cuDbyeiONb6Aii4vaSewgRsaAhaAEALw_wcB

[@arcanatcg9866]

hey I need some advice, I as of tonight followed the steps of this video and changed the gear lever of a 2016 ninja 300 and before I did the bike couldn't find neutral but i could shift to 1st and onwards. (the bike had a stationary drop and that was why the gear lever was being replaced. after replacing the part the bike can only find 1st gear and neutral. what have I done wrong?

[@arabmotorcycle8633]

Hi, try to adjust the pin that is screwed from both sides. Keep adjusting back and forth until you find the right point

[@jackanthonypayne9144]

Hi mate you know those black rubber things on the shifter are the ment to move as mine has loads of play and doesn’t down shift very well

[@arabmotorcycle8633]

Hi, No it shouldn’t mate. The original part is fixed and it doesn’t move at all and the new one i put on it moves inward towards the foot peg. It has a hard spring that moves only if you place a strong pressure on it, otherwise it doesn’t move

[@Lwmusic1000]

What years gsxr's

[@MrPataChannel]

Thank you , i Just break mine Yesterday night

[@GSX_MOTO]

Where did you buy a new one

[@djshark211]

I have the 1st gen. The shifter and peg are connected. I’m noticing that the shifter sits lower than the original, I’ve tried to adjust it but I bent the rod.

[@byronrich2780]

Came here for the c-shaped stopper. Mine blew off while riding. Thanks for showing me what it looks like

[@bronichiwa984]

Do you have any idea what size the washer and snap ring are? Mine busted when I low sided, and the lever snapped + those piece went with it. Couldn't find them.

[@EvilSapphireR]

I cannot remove the gear shifter connector. It is sitting too tight on the gear shaft grooves. What to do?

[@spekeridope4532]

is this 1 up 6 down?

[@ibrajimenez2098]

Hello tha ks for your video. I recently purchased the part but it didn't fit. Which model is your sv 650? Thank you so much!

[@arabmotorcycle8633]

Sv650s why it didn’t fit? Is the thread going the wrong way?

[@arabmotorcycle8633]

The first one I bought didn’t fit as it was for the SV1000 but the seller posted it as sc650. The threads were opposite so I couldn’t screw it in

[@jamieborland2179]

@@arabmotorcycle8633 couldn't you have just turned the metal rod around

[@arabmotorcycle8633]

@@jamieborland2179 no as it is opposite thread on each end

[@tristancain9656]

You can go on Suzuki part house and they will have oem replacement parts for every Suzuki ever made, thank me later

[@shortshighlights88]

Can u please twll me where did u buy the replacement part. Thank you. Im struggling to find one

[@tristancain9656]

You can go on Suzuki part house and they will have oem replacement parts for every Suzuki ever made, thank me later

[@kwizzlerz]

where did you purchase the frame sliders and lower fairings?

[@arabmotorcycle8633]

Seanman 14414 try this website as I buy all original parts from them. www.motorcyclespareparts.eu/en/suzuki-parts/motorcycles?gclid=Cj0KCQjw-af6BRC5ARIsAALPIlXfzoIc5MY9r0WFQ1Cy-FtaqT0RPSB9cuDbyeiONb6Aii4vaSewgRsaAhaAEALw_wcB

[@arabmotorcycle8633]

Seanman 14414 they called MSP motorcycle spare parts. They operate in Europe but deliver worldwide. They do fairings and all original parts

[@WILDARMS_TV]

How do I take off the C stopper!?!?

[@dvrk8887]

Thank you bro I didn’t have the tool for the snap ring so I had to use wrench to get it back on

[@LoSoPrinceDre]

Amazing

[@devoonbmx603]

Good vid thanks bud

[@rhys2528]

what is this type of shifter called?

[@arabmotorcycle8633]

I just searched for gear lever/ shifter and this came as an option

[@Supercarlsunday]

I welded a new end on mine, have a look in my channel. Very interesting. Its still going strong! Handy having a tig welder on standby..

[@tbnjay3847]

The part at the end that’s connected to the engine is what broke for me idk what the fuck to do

[@s__6292]

did you fix it?

[@سسعدالرويلي]

مشكور اخوي

[@devoonbmx603]

🔥