This video shows how to remove and install an ignition switch on a 1999 - 2007 Ford F-250 / F350. Please like and subscribe.
Пікірлер: 131
@charolito1312Ай бұрын
Great video, very detailed. I was going to take it to someone to get it done but, after watching your video I feel confident enough to do it my self….. my old key wasn’t fat like the one you are talking about with the chip in it. So I think I’ll be alright. Thanks again.
@JimP4194 ай бұрын
Wow did not expect it to be this simple ill be ordering 2 sets of ignition with matching door locks now. Thanks for your video.
@bea-careyglynn634325 күн бұрын
Great vid! Can you tell me how to undo the silly little wire in the steering column at the ignition? I need to replace a melted harness.
@billbolinger4195 Жыл бұрын
What's the trick to removing the old tumbler when the no longer will turn the switch to on ?
@juanjosehernandez4595Ай бұрын
Excellent video. Just what i needed. Thank you 🙏
@benwilliams1826 Жыл бұрын
New video, Very informative. Just had my column tube replaced and now me 02 f250 won’t start. Skinny key no chip. Is there a wrong way to put the ignition cylinder in? Like upside down? I’m getting a crank no anti theft blinking lights.
@605_ACE Жыл бұрын
If the old cylinder had the transponder key would you have to reprogram it or would it already be programmed
@misterbulgerАй бұрын
What is that little wire for below the ignition cylinder? Mine came loose there's a really crappy looking plastic clip that is loose holding the contact in there
@ZAMMER626 Жыл бұрын
What if I don't have the key. That's why I'm changing the ignition
@corydeanhawkins8 ай бұрын
I used forscan
@justaperson62197 ай бұрын
No idea but my key slid out while started and can be taken out after I got the ignition switch out so it did help with that atleast
@justaperson62197 ай бұрын
Maybe break the thing to where it can start without one
@Davidsayshi073 ай бұрын
Literally my thought
@brianwilliams767611 ай бұрын
Someone tried stealing my Excursion and distroed the ignition switch so I am unable to turn it to the on position to remove to old one. Do you have any thoughts on how to remove the bad one?
@alexsoriano51736 ай бұрын
did u figure it out?
@oscarhaynes199420 күн бұрын
I was thinking about drilling out the cylinder. I'm replacing it anyway. After looking at the replacement, I don't see why it would damage anything but the cylinder. Am I missing something?
@bryanhutzler70105 ай бұрын
Thanks. I am fixing the shifter arm abd needed to get the plastic collar off. The switch was blocking this.
@christianlane11752 жыл бұрын
I ordered a new cylinder from ford for my 03 excursion there going to rekey it with my key I already have for the truck so will it need reprogrammed or will I just be able to slap it in and start it or will they have to program it
@j-kane5922 Жыл бұрын
Can you install a transponder key and cylinder in an older truck? I have a 2002 f350 that didn't have one originally
@paulrapisarda60572 жыл бұрын
Excellent, informative video. Thank you
@alley55customs932 жыл бұрын
I appreciate the positive feedback.
@jtoler54989 ай бұрын
Hey bud do you have a video of how to change the transponder? Thanks
@JerryDGosselАй бұрын
Thanks neew it out on a 99 F-53 to replace the shift tube bushings! Jerry.
@cdwhiley3 жыл бұрын
This is a good video. Did you make the programming video for this truck? I have a F-250 with a bad cylinder switch. I gotta put a new one in but don't understand how to program the truck after that to the new keys.
@ilovemyevo5563 жыл бұрын
forscan with the cable you buy from ebay
@BURTKINGSBURY11 ай бұрын
Thank you. Great info and definitely helped with some of my issues.
@davidhellyer5079 Жыл бұрын
Can you replace the lock cylinder with a transponder style?
@jose124105 ай бұрын
Thanks I did mine by watching your video thank you 👍
@crazysquirrel9425 Жыл бұрын
Can you remove the lock and not leave the power on? Example: remove the lock, use screwdriver to turn vehicle off, go to a parts store the next morning, get a new lock, and come back to replace? Could a screwdriver do that? And start the vehicle (without PATS) too?
@BrianSimmons Жыл бұрын
I don't believe you can. The ignition has to be "on" to remove it and you obviously can't move it back to "off" after it is removed. Of course you can simply disconnect your batteries negative cable and that will kill the power to the truck to prevent the batteries from being drawn down.
@lalogman1 Жыл бұрын
Good video. Someone tried to steal my 2001 F250 super-duty and tore-up my ignition switch but failed to steal it. I’ve been trying to install a new switch but every time I install the new one the key will not release. It starts and turns off but the stays Locked in the cylinder. The new cylinder came with a “caution” warning not to rotate the key clockwise until the lock cylinder is installed into the steering column”. There is no way to insert the new cylinder without Turning the key to “ on “ position the new cylinder. Has anyone had this problem and found a solution ?
@johnhallford239 Жыл бұрын
Thank you. Great info and definitely helped.
@Chasingthesun20193 жыл бұрын
Can you replace a switch that has a transponder to one that does not when they go bad?
@alley55customs933 жыл бұрын
No you can’t change the switch to a non-transponder. It is linked to the “ECM” electronic control module which is your main computer for your car.
@Chasingthesun20193 жыл бұрын
@@alley55customs93 thank you so much for the help. We hoping we could. Glad we asked.
@fixitlinc33392 жыл бұрын
So if i ordered a lock cylinder that doesnt have a chip, your saying it should work? Or how did you reprogram a key with no chip so you truck could read it
@myobmyob221511 ай бұрын
So take off battery cable Turn in run position Press button and pull out ignition Put in new ignition in run position Replace batt cable Hope you dont need transponder programming? Any way to know about whether I need one or not before this project? 91 Lincoln Town Car Thanks
@jackhayes8302 жыл бұрын
there is a small wire that is semi circular that fits into the top of the lock sleeve. it appear to be loose and creates a battery draining short. would you know if i might be missing a containing ring to hold this wire and electrical contact in the cylinder and sleeve ?
@genebarnes26795 ай бұрын
It just slides in a little slot. It senses the key, it goes to the chime.
@millees12 Жыл бұрын
Greatly appreciate the video, thank you!!
@raymondmoyle27852 жыл бұрын
I’m doing one on a 06 mustang gt how do I remove the ignition without a key
@heyheyjaytube2 жыл бұрын
a friend of mine started his with no key in it and now we can't get the key cylinder back in. how do you get disk in bottom of cylinder tube to realign to put new cylinder back in?
@jeanzamudio68702 жыл бұрын
Sir I lost my key to my mustang 2000 and I need to move my car before they tow it for being parked long. So how do I start my car with out my key its not chiped
@jakethomas55212 жыл бұрын
Love your video. I have a 2010 Madza 6. The ignition acts as if it has an intermittent short. When it is not working there is no power to head lights, radio, instrument panel, power locks or windows. Total electrical system shut down. Could this be the ignition switch? Help Jake from Portsmouth, VA
@Austinadcock2 жыл бұрын
This video is replacing the ignition lock cylinder not the actual ignition switch. It does sound like you need an ignition switch though. Or even a loose/corroded battery cable end.
@raylazarich79542 жыл бұрын
99 mercury grand marquee replaced ignition switch cranks but won’t start
@raylazarich79542 жыл бұрын
Also now the chime goes off when I open the door even though I removed the key
@alley55customs932 жыл бұрын
So, what was it doing before you replaced the ignition? Signs / Symptoms? What prompted you to replace the ignition?
@JD-og5ei3 жыл бұрын
Can someone tell me how to do this repair if the ignition cylinder won’t turn to the run position. The steering wheel is not locked. It is stuck.
@ilovemyevo5563 жыл бұрын
Drill the lock out carefully don't break the bit off nto the lock
@riceski2 жыл бұрын
We lost the key it isn't transponder - can we use this tutorial to change out the lock?
@ayshortier2 жыл бұрын
how were you able to turn the ignition with out the key? I prefer a bypass and I lock my car with a bar anyway. Undriveable with the lock.
@RedFlagCoalition2 жыл бұрын
In the beginning of the vid he mentioned it was broken. He could turn it without the key
@tommyhajimoto69686 ай бұрын
So what happens if you don't have a key and you want to replace the cylinder?
@christophercostas024 ай бұрын
im trying to figure out the same....any luck with yours?
@tommyhajimoto69684 ай бұрын
@@christophercostas02 I ended up drilling it out completely. If you take the top plastic off there's a cylinder about the size of a pencil, if you can pop that to come straight up, you can get the steering wheel to move but you might have to drill a bit.
@agzalez12 жыл бұрын
Thank you
@alley55customs932 жыл бұрын
I appreciate you positive feed back.
@RedFlagCoalition2 жыл бұрын
I lost my key. How can I get the tumbler out without turning it to the on position?
@pouncerminned8632 жыл бұрын
have to pick the lock
@darlamuehlmann22632 жыл бұрын
@@pouncerminned863 screwdriver? I had the same problem as the guy above 2005 Ford explorer I lost my key
@pouncerminned8632 жыл бұрын
@@darlamuehlmann2263 You must force it over to ACC either by picking it over or forcing it over with a screw driver, unless you drill out the retainer pin
@MrSteak-je4gy2 жыл бұрын
Thank you for the vid 10/10
@alley55customs932 жыл бұрын
Thank you for the positive feedback. I really appreciate it. Glad to help.
@MrSteak-je4gy2 жыл бұрын
@@alley55customs93 seemed like a daunting task but definitely wasn’t
@lisagioco16672 жыл бұрын
Is there a chip in the 2001 Key
@alley55customs932 жыл бұрын
There shouldn’t be a pats transponder ring on a 2001. I had a 2000 Ford Excursion Limited Edition that had a chip / pats transponder ring. What model Ford do you have?
@johnbecnel6932 жыл бұрын
Great help thank you
@alley55customs932 жыл бұрын
I appreciate the positive feedback.
@robertlopez77479 ай бұрын
What if I don't a key
@clarencejonesjr.169811 ай бұрын
My original transponder key was lost and the original cylinder was destroyed. What's next ? 04 expedition.
@iPhone_tek2 жыл бұрын
What do I do if after replace it won’t crank now
@pouncerminned8632 жыл бұрын
did you ever figure it out?
@morrishawkins96593 жыл бұрын
Do u have to buy the ignition from the dealership?
@elchingonracinggarage46492 жыл бұрын
It's better to buy from O Riellys or Auto Zone because. The one from the dealership you have to put it together
@loosenut19693 жыл бұрын
Thank you sooooo much!
@TmP452 жыл бұрын
Whats the screw size for the ring?
@tales527 Жыл бұрын
What if you can't turn the tumbler at all?
@dvader3000 Жыл бұрын
You insert you key and turn it,then push the pin and pull it out,very simple
@MrFasteddie8897 Жыл бұрын
@@dvader3000what if the key is missing?
@billbolinger4195 Жыл бұрын
The problem with mine is that the key no longer works after 465,000 miles, so I can't turn to on position to push the detent button
@richardholcomb886 Жыл бұрын
How do i get it out without a key
@bezaleeluri53912 жыл бұрын
I put the new switch, but I can't take the key out... what happened??
@genjiegeneralgaming358211 ай бұрын
What if you don't have a key to turn it?
@ilovemyevo5563 жыл бұрын
That's a feature not a problem.. what was the charge for a replacement? could have spent that on an alarm
@Blackford862 жыл бұрын
Sir can you send me the video on how to reprogram keys
@rogue83313 жыл бұрын
what if i’m totally unable to turn it?? is it the same issue or is it something bigger. help asap please
@lesterbrown63072 жыл бұрын
I have the same problem it is locked in place
@rogue83312 жыл бұрын
@@lesterbrown6307 shoot if i remembered how i fixed it i would tell you but i can’t sorry man🤷🏽♂️
@lesterbrown63072 жыл бұрын
@@rogue8331 thanks for the reply I realized the steering wheel wasn’t locked so it did work after I turned it thanks again
@rogue83312 жыл бұрын
@@lesterbrown6307 glad to hear that everything went well have a great rest of your week
@dustindavies81282 жыл бұрын
Ok I don’t have a key . X what do I do
@jshbryan3 жыл бұрын
Thanks a ton for this. Same exact issue on mine!
@alley55customs932 жыл бұрын
I’m glad I could help. Let me know if you have any other issues I can help you with.
@kaykool9589 Жыл бұрын
What if it can't be turned on?
@Pittylife3 ай бұрын
Did the switch but the key won't come out😮 my luck.
@BuddyBunchАй бұрын
Me2
@gregbrown4188 Жыл бұрын
What if you don't have a key for it.
@jamesbarfield9902 Жыл бұрын
I guess you could say I didn't get the Tumblr out because I didn't remove it in one piece but I'll tell you right now whenever I was stuck in the woods and whenever a buggy pulled up I dropped the keys somewhere but before he could even bring them cuz he found them right where we got in the truck needless to say I done took a screwdriver but then barbed wire pliers and I beat that b****** guts out all I had to do was pop the very end off and then you could just push the thing forward with screwdriver
@LafoyBallJr7 ай бұрын
😮 what you ant got the keys
@williamhoward9493 Жыл бұрын
You never followed up on the how-to program transponder keys!
@nashvillekelley682 жыл бұрын
Hey man certified badass right here very helpful video for sure can you send me a link possibly to the one that you're speaking of at the end of this video that would be awesome I subscribed and liked smash that like button bro have a good one thank you
@3tcreativity3 жыл бұрын
I followed this video and replaced it but not it won't crank over ?
@Cleary_223 жыл бұрын
Won’t even try to crank?
@iPhone_tek2 жыл бұрын
@@Cleary_22 no , won’t do anything , mine is doing this . Just changed it . When try to turn on it does nothing
@Cleary_222 жыл бұрын
@@iPhone_tek mine ended up needing the key re coded. Something is still messed up, I took the plastic ring out of it, held on key on it and used the other key to turn the cylinder and start it. Still like that to this day, I have one key zip tied to the plastic piece under the dash
@MrFasteddie8897 Жыл бұрын
What happens if the key is missing?
@MrFasteddie8897 Жыл бұрын
I want to know the same thing
@richardholcomb886 Жыл бұрын
Me too
@genebarnes26795 ай бұрын
Drill it
@oscarhaynes199420 күн бұрын
Drill baby drill....carefully. 😊
@marthaflores8329 Жыл бұрын
What happens if I don’t have a key…I lost it
@lanapfeifer63393 жыл бұрын
should edit this. so much repeating and fill the video could be just s good in 1.5 minutes. but thanks
@z444-u5c2 жыл бұрын
Make your own vid
@mikeyc37652 жыл бұрын
Lo09o
@raylazarich79542 жыл бұрын
Engine would continue to run with key remooved
@nunnyabizness2 жыл бұрын
Edit the title! This is NOT the ignition switch! This is the ignition lock cylinder.!
@alley55customs932 жыл бұрын
Thank you for the heads up. I didn’t realize that. I changed the title. Again I appreciate the catch.
@markpuckett488011 ай бұрын
can tell by your reply that u ain’t play-n bout any title incorrectness!! The way u demanded the editing of this title and then capped off on that “NOT” like a boss should let any would be title incorrectivenessers in the future know that it ain’t happening. Thank you sir for your service and dedication to our correctiveness integrity.
@nunnyabizness11 ай бұрын
@@markpuckett4880 It’s the least I can do for people looking for help and only coming up with the wrong information. It sucks dude. Disinformation. But don’t empathize with anyone whatever you do. I suppose I could do the same and I will try. Peace brother.
@crazyaracingchannel50553 жыл бұрын
What if I don’t have my key
@bobgil34642 жыл бұрын
You're probably a thief.
@donniebarnes5566 Жыл бұрын
8
@matthewsloan47142 жыл бұрын
gu
@marcusguajrdo73Ай бұрын
If you left the key a tad forward where it was making the truck ding would it kill the battery?
@tanboy9020 Жыл бұрын
Could you swap the ignition switch with a non transponder switch without effecting the vehicle?