HOW TO REPLACE AND BLEED CLUTCH MASTER CYLINDER NISSAN

How to replace and bleed master clutch cylinder Nissan Qashqai.
#jersovauto #nissanqashqai #clutch #nissanclutch
======================================
If you found this video helpful! Please give us a thumb up 👍 leave your comment below ⬇ 💭
☕Buy a coffee ➡ ko-fi.com/jersovauto
🔔 SUBSCRIBE ON KZbin
/ @jersovauto
Thanks for watching! 🙌
======================================
⚠️Disclaimer: This video is made for entertainment purposes only. You should always seek a professional advice.

[@lukebradley4048]

Perfect doing same thing today for the first time great video

[@jhonnmillner9447]

Thanks your Video help me A lot i have a Nissan tiida 😊

[@jersovauto]

A lot of models seems to be sharing same parts which makes sense really! I’m glad it helped you! 👍 🤜

[@Ndzila-pl6qw]

Heita I have nissan almera N17 1.5 model, I'll be watching your videos. Am in Mzansi

[@curtisyoungs9382]

I am struggling to do the last step. I cannot get the bleeder valve pipe into the “2nd position” I am trying to push the metal clip downwards and the pipe to the right? Is this correct do you have any tips. No fluid or air is coming out.

[@jersovauto]

@@curtisyoungs9382 Yes it is correct! Clip down and push right at the same time until it stops… Make sure you have plenty of brake fluid in your reservoir!!! On max mark..do not let it run dry!!! If still struggling perhaps try to prime master cylinder itself be injecting brake fluid with syringe 💉 take needle off , fill syringe with brake fluid, take top tube off which goes to ur master cylinder…take it off there it connects to ur brake fluid reservoir and inject brake fluid into ur master cylinder… pump clutch pedal…perhaps press in once…then inject more brake fluid… reattach tube back … and try to bleed it now… Hope it helps!!!

[@clarksteel2069]

Hi what size was your hose for bleeding the clutch after please ? Useful video for qashqai owners who have this problem , thanks .

[@jersovauto]

From top of my head it was 8mm outer diameter and 5 mm inner diameter clear pvc tube.. u can buy it on Amazon . 👍 Thanks for watching 👍

[@clarksteel2069]

@@jersovauto thank you .

[@user-qs4tx9xz7o]

I cant seem to get bleed valve open. Any ideas

[@jersovauto]

Make sure ur beak fluid reservoir is topped up 🔝 plus you can try to take syringe 💉 disconnect pipe which goes from brake fluid reservoir to master cylinder and inject some brake fluid to master cylinder… just fill it up and it will give u initial kick…connect everything back together and pump clutch pedal by hand…just make sure ur brake fluid reservoir is topped up to the max… Let me know if it worked… worked for me anyway! I’ve straggled with this bleeder nipple as well a bit…

[@lavinrichard2460]

Isn’t it possible to just buy the plastic that breaks off , I think it’s called a clutch master cylinder buckle/clip , it’s a white plastic thing right ?

[@jersovauto]

I’d say everything is possible if u can get spare parts… Complete master cylinder price starts from around €50 if you shop around…So it was no point trying to rebuild it considering it was in service for nearly 15 years 🤷‍♂️ But would be interesting to see someone would actually rebuild it 👍

[@user-qs4tx9xz7o]

Do you need two people to bleed the clutch

[@jersovauto]

No. You can do it on your own no problem!

[@rowanabrahams9280]

I am bleeding it but the clutch gets stiff, then gets loose again after a few pumps. What am doing wrong?

[@jersovauto]

@@rowanabrahams9280 not sure, but keep pumping it unit all air is going to come out.. make sure you keep topping up bake fluid as well. Hope this helps 👍 👍 👍

[@rowanabrahams9280]

@@jersovauto Thank you will try