How to Replace and Clean a Throttle Body Assembly (Jeep Compass)

In this video, I show you how to remove a broken throttle body assembly, and replace it with a functioning used one. The used throttle body was purchased from a Auto Recycler and was tested to work. I then cleaned it to bring it back to new functioning condition and then installed it back on this jeep.
If you have any questions regarding the video, you know where to throw them!! Thanks for watching :)
______________________________________________________________
Please give it a like 👍 and follow 👣
milmast Instagram ▶︎ / milmast
SickDips Instagram ▶︎ / sickdips
milanmastracci Facebook Page ▶︎ / milan.mastracci
______________________________________________________________
Videos in the Outro 🎥
How to Remove a Stuck Brake Rotor ▶︎ • How to Remove a Stuck ...
How to Clean Rubber Floor Mats ▶︎ • How to Clean Rubber Fl...
______________________________________________________________
Products in Video 🔨
GearWrench 3/8” Ratcheting Gimbal ▶︎ amzn.to/2IRM7zy
Throttle Body Cleaner ▶︎ amzn.to/2pGlFks

[@mattcooper7718]

Just followed your guide. Was super helpful. Car is running great now. ONE TIP for newbies like me: You DEFINITELY want remove the bracket that holds the throttle body. It will save you a ton of time when you go to install the new body.

[@unclefreddieDied]

Thanks for the tip... doing it this weekend

[@christopherheishman3664]

Replaced my throttle body after watching this video - you saved me over $500. Thanks for the great walkthrough and the tool recommendation (saved money and my knuckles)!

[@mulisaurus]

This is by far the best adn easiest video to understand in how to replace one's own throttle body. Thank you so much for keeping it simple, clear and honest.

[@sandiegoornothing7848]

Thank you so much! Saved my mom $900 bucks. You are the man!!!

[@ankylo5550]

I'm seeing a lot of these comments but I gotta say great video! Super good instructions and even with a couple complications the job was easy with your advice! I can say if you have a patriot like me the Gimble is a lifesaver for a couple bucks at the store!

[@Steve-zo1zg]

Hey man. Just wanted to say great video. I just swapped mine out 15 min. ago in my 2014 compass. 2 small details I would like to point out. I found it easier to remove to top radiator hose to get in there. And the 2nd thing was there was a plastic screw holding the sensor wires on the throttle body to the tube you removed. I just cut the plastic screw off. Great video though it was a life saver.

[@unclefreddieDied]

👍

[@jmonie02]

radiator hose?

[@eltonisaacs9432]

😊😊😊

[@xXzachybearbuddhaXx]

You’re saving my life right now bro! You’re the best! 🔥🤜🏻

[@LifeWithOme]

Thank you very much. I just replaced the throttle body of my 2013 Chrysler 200. It was just like yours. Same place. Followed your instructions. Great video.

[@thomasthompson3123]

ThAnkz so much for this. I didn't even know that the throttle body assembly was down there. You just saved me/ my fiance a tone of money.

[@simonh6328]

Watched 10 videos on same issue yours was fantastic . Concise to the point and very easy to understand . Thank you

[@christieproaps6611]

Thank yu my grandpa's went out in his jeep my mother and I replaced it took couple hours and saved him lots of money

[@joelfelix2922]

I did this today on my 2016 Jeep Compass and man was it annoying. First off the brace for the bottom part of the hose was frustrating to get off. I managed to get it off using the socket and a small extender and turning it with my hand cause it was too tight to get any of my tools there. So after I got the old throttle off put the new one in but it was difficult lining up the bolts perfectly to screw them all in. So noticed there was as a bracket that you don’t have in the car in your video. So what I did was loosen that bracket just one bolt think it was a 14mm after that was easy to line up the bolts perfectly, tighten them down then tighten the bracket up. Snug and tight finally.i found it easier and much more room to take out the battery otherwise it would be more annoying. Oh also the hose was tied to the wire for the throttle sensor so I just clipped that off. So after all that put everything back in place. Started up the car and viola! No limp mode. Engine light is still on but I’m hoping it goes away soon.

[@jared7723]

Thanks I'm doing this today car is sluggish all engine lights on crossing fingers but computer bring to shop they reset car

[@louiswood57]

Just unhook battery, if everything is done correctly…..the computer will correct it

[@danmeyer8550]

I appreciate that. this engine mounted throttle body is new territory for me. I was looking for a few minutes before I realized it. Im like What?? No way... Intake tube on mine is lose. I wasnt sure if it was supposed to be like that or it was never reattached from the previous owner? Now I know I also know why the Air Box mounts are broken and the box getting tossed around until I tightened it up with a spring so it dont move around. NOPE Im replacing some stuff. First video I watched no need to take up any more time and continuing watching anymore . Thanks Again!!!! DDM OUT

[@mcamodell]

I just finished this. I removed the top(left) of the airbox and the battery and didn't regret it. BE CAREFUL WITH THE AIR TEMP SENSOR! It is delicate and brittle plastic after 10 years. Ask me how I know... Moving the upper radiator hose did help and it only drips a little, you can top it off with cheap distilled water without altering the ratio in any significant way. The gaskets are not included because Chrysler says they are reusable...I bought a new one anyway too 😉 It took 5 trips around my 1sq mile block to run well so Don't Panic of it doesn't start acting right immediatly, the computer needs a minute to get the new voltage range.

[@unclefreddieDied]

Cameron, Awesome tips! Thanks! Doing it this weekend

[@OliverKoolO]

Next do time do the throttle relearn process

[@mcamodell]

@@OliverKoolO there isn't going to be a next time 🙄

[@OliverKoolO]

@@mcamodell Sale and. Run.🤣 I hope you Sold and Ran 🤣

[@05cesarleo]

great job!!!! just don't forget to tell the people they'll have a temporary rough idle at the beginning and then it'll stabilize.

[@milanmastracci]

+cesar perez Good call :)

[@Charlie4pants]

Great video. Three additional points I would like to add: 1. There is a fifth hole on the throttle body corpus, which fits over a peg on the mounting and which the throttle body is held against by a bracket off the engine block. This takes quite some (blind) manipulation to get the throttle body both out at the beginning and back in at the end 2. On my 2016MY Compass, the connector cable is secured by a clip to the bottom bracket of the air hose. There is very little slack in the cable, so it is not possible to remove either the connector or the air hose until this clip is cut off. 3. Using interchangeable screwdriver ends in an engine bay as compact as the Compass' is not a good idea. I am waiting for three of them to shake loose from the drip tray...

[@unclefreddieDied]

Thanks for the tips and LoL on #3!

[@juancasanova2449]

Great video...perfectly done..🤗. I never seen anyone explained on detail as you did...you made it so easy...thanks

[@wap1747]

Great Video I just changed mine at 180k. Now my car still runs great it has 226k on it.

[@branw11223]

Awesome video! Thanks for being so helpful and even posting the links in the description box, it helps a lot! Keep up the great work!

[@milanmastracci]

+TheWangchester Glad to hear its helpful :) Cheers buddy!!

[@Jordan-nj2ve]

You do such a great job!! :) I was first introduced to your channel when I stumbled upon your video about touchless car washes. I was hooked from there. :) Can't wait for the next video! :)

[@milanmastracci]

Thanks Jordan!! 😊 got lots more on the way

[@Jordan-nj2ve]

+milanmastracci :)

[@noeygarza6522]

Very detailed instruction.

[@MrAugieiscool]

I appreciate your advice thanks.. Good clear and helpful information

[@milanmastracci]

My pleasure!

[@hussainalsaimari6936]

Awesome videos I really appreciate the work you do. Keep up the good work!

[@milanmastracci]

+Hussain Alsaimari Thanks Hussain :)

[@felipealejandro4969]

Can a bad air filter cause a throttle body to act up

[@bettinafernandez7498]

Nice vid sound and clear helps a lot thanks keep it up

[@jared7723]

wow simple easy to understand

[@HelloKittySam]

Great video per usual Mil!

[@milanmastracci]

+Samantha Wills Thanks Sam :)

[@HelloKittySam]

[@bigdaddylove1763]

You made that look easy... Yeah Right!!! Especially, if, you have large Hand's.

[@milanmastracci]

+Big Daddy Love Oh it was barely easy with smaller hands lol

[@JonathanRodriguez-ot5df]

If you rename the video, vehicle specific, you’ll get many more views and likes. I’m just viewing this after having to figuring it out myself. This video would have been awesome to find before.

[@patriciocastro1377]

I agree, I have a Jeep Compass and it's hurting my head just thinking about how expensive a repair (yet how simple the installation is) this is.

[@gregamos7987]

Thanks, great video, and good tip to use the gimbal! I have replaced my throttle body but didn't have any luck with the relearn procedure - my ETC light does not go off when I turn the key to start position and wait. I think I'll need to limp it in to the dealership and get some codes read. Any tips? Seems like there's more going on than just the throttle body...

[@danielrocha5297]

So is this what needs to be replaced if the ETC comes on? Mine will flash if I accelerate a little too quickly, but goes away once I back off or gently accelerate

[@steviestevereno]

Gloves dude!

[@ferdelaram]

Hi Milmast! a great video! thank you :) .... i will have to do the same work. One question: How did you reset or re-program the Throttle Body Assembly to control the RPM to correct parameters? THanks!!!

[@unclefreddieDied]

Did you figure it out? Is it self learning?

[@grguy793]

Thanks very good describing step details.

[@bradjolly2925]

Is the throttle positioning sensor / module attached to that carb on this jeep as well

[@CarlosMunoz-ec4ch]

So easy-peasy replacing this thing but does it have to be configured? I still get the thunderbolt sensor light. It comes and goes.

[@jcampbell07]

you save me $$$$ bro! Thank you!

[@NotYourAverageRalf]

Why was it replaced ? What diagnostics were done to determine it was bad?

[@susanbrowne300]

I will be following your video to a "T" this coming weekend on my Jeep Compass - how much did all the parts cost you ?

[@tylermize3486]

Is there a relearn procedure for the new throttle body?

[@luisdelgado6432]

What was wrong with the throttle body that was replaced? I'm having issues with my 2012 Compass where it sputters and hesitates when accelerating. I checked the coils and they're good, has new plugs, and battery is also less than 4 months old. I'm thinking that it's something to do with the throttle body.

[@REDLINERUNNER]

If you curse don't BEEEP it, it's funnier that way!!! Nice viddy...

[@ImAzraa]

+Antonio Majstorovic Its a youtube thing. Getting your videos flagged or your channel marked as 'for mature audiences' its a monetary loss.

[@REDLINERUNNER]

+ImAzraa but who's gonna rate it???

[@Brankocica]

Awesome

[@milanmastracci]

+Branko Cica Thanks

[@matt9906]

Hey Milan, following this process right now. I have the old throttle body removed and am trying to install the new one. It doesn't seem to fit right, it's like ALMOST aligned, but not fully. I even tried re-installing the old one to troubleshoot, but it also doesn't go back on. I thought the bracket might be holding it up some how, but I don't know. Have you ever experienced this?

[@MrDodgyh]

Hey Milan, question. Do you need to create or purchase a gasket for the throttle body? Or are the two plate faces designed to simply be metal on metal? If there is a need for a gasket, do you suggest a tube diy gasket? Or a gasket fit for specifically for the part? Thanks in advance

[@MO-qc6dy]

33k!!!!!! Subs been here since 1k!!!!

[@mariolevesque5404]

good vids like always!!!

[@milanmastracci]

+Mario Levesque Thanks Mario :)

[@Chreis26]

Thanks so much for the video! Is it necessary to reprogram/recalibrate anything after replacing the part?

[@vincientcrawford6045]

Curious as to why you did not replace the gasket with the installation?

[@alhawsawisalah]

thanks bro. I might do it myself specially I don't trust my greedy so called "Mechanic"

[@angierossetto9334]

What size ratchet did you use ?

[@abdurrehmanmanj2751]

I'm going to replace mine this week my rpm goes high without even doing anything and sometimes the rpm is way too low and the car almost stalls I think it's the sensor in the throttle body

[@javierarias2867]

Se tiene qué desconectar la batería para qué no se desconfigure el cuerpo de aceleración?

[@user-hs4zq7em5q]

How do you put the bracket back on the throttle body the one that’s mounted to transmission that takes a 13 mm socket

[@UzbekAlibek]

Dope vid once again! 👌🏻

[@milanmastracci]

+Alibek Khasanov Thanks buddy :)

[@UzbekAlibek]

+milanmastracci Anytime bro! :)

[@abelalquicira9345]

What was wrong with the old throttle body?

[@greenleeves69]

you da man

[@amberdecamp8581]

What sensor is that is that the throttle position sensor??? Bc no part store has it like they can’t even order it so I wanna know if I actually have one

[@musicalharmony4564]

Lovin ur vids bro!!

[@milanmastracci]

+VMP Cheers!!

[@brandonshaul4702]

can you clean the throttle body without taking it out? like can i spray tb cleaner without having to wipe it out and letting it air dry for say 5-10 minutes?

[@greenleeves69]

Awesome and very informative video. Quick question, doesnt it require a new gasket, or can you just reuse the old one if its in good condition? Thanks

[@milanmastracci]

You can indeed reuse the old one if it seems to be okay!

[@greenleeves69]

@@milanmastracci awesome!!!

[@MotoThrottle]

cleaned my throttle body on my Golf 3, well now its hard to start and cant idle and take full throttle?

[@richardgriffin8519]

how long would it take to replace a throttle body for a 2012 Jeep patriot ?

[@fmqfmq1207]

knowing what youre doing and having the right tools is half the battle. the other half is time and patience.

[@martinisoler6151]

Thank you for the great video! I do have a question, I have a 2014 Jeep Compass and the "Electronic Throttle Control (ETC) Light" came on, I experience loss of power while driving. I was wondering if what I need to do is this, replace the throttle body. I hope to hear back from you soon, thank you

[@jaredturner4619]

Yes that will fix it

[@llreanloo1143]

I think we need to sue Jeep, my 2015 Compass is doing the same thing.

[@actricethessalonia8781]

Mines is doing that now as well. First time. Just got it in 2016 and it's a 2016 compass

[@brittanymabe8628]

Mine just started yesterday. Mine is a 2014 jeep compass😡

[@GrimRize]

@@brittanymabe8628 Mines 2014 also and it's now doing it for the second time (had it replaced six months ago).

[@larrypiercejr634]

Hey we’re do you get that Lil tool from you was using

[@KarateSoccerKick]

Could you do a video on sub 10k manual cars or whichever good price for a person looking to buy their first manual car? Thanks

[@milanmastracci]

+KarateSoccerKick That sounds like a good idea for a future video :)

[@DTUFINOPhotography]

I'm installing a brand new TB tomorrow, my old one failed. Do i need to clean the new TB with TB cleaner before installing? Just curious.

[@arminphillips2001]

I'm investigating the same part but as um told it could also be the pedal inside the car with a senor on the fire wall the jeep drives like 50 down the rd with no help of pushing the pedal to go faster lol your opinion is?

[@irons8857]

Nice vid 👍🏻Once you've installed new throttle body can u just start up the car?

[@unclefreddieDied]

How'd it go?

[@mkiszkiel]

on 2016 Jeep Compass do I just replace the throttle body or will I need to do the relearn with gas pedal before starting it up? Hold the pedal to the floor for 10 seconds before starting with key in on position ?

[@MiKe-ok5ig]

Can i clean the throttle body without take out?

[@rayhanmorales1364]

I saw another video where they needed to re-program the car's computer to 'learn' the new throttle body. When is this needed, and when not?

[@leopoldorocha8818]

How you know it was bad n not dirty

[@misc5831]

I have a 2016 Compass 2.4L. The ETC light just came on and the car is running poorly. Can I just clean the throttle body that I have? How can I tell if it needs to be replaced? I did notice a change in MPG prior to the light coming on. Also my engine light is on as well.

[@elijahrashad3874]

Aye bro I got a question.. my throttle body is shot .. what kind of tools do I need to remove the battery and etc.

[@gonzalobrockway6600]

What size are the Bolts ?? I lost them

[@FEHKINGS]

Theres usually a clear coating in the throttle body, never scrub it with anything. Only spray it down.

[@FEHKINGS]

+MzNToS not saying he messed it up, saying it as just something for people who may consider doing this.

[@jaybird6152]

I changed mine but now the lightning bolt is on what do i do? Please help!

[@dennis-nu8xw]

Where is the throttle body sensor on a Jeep Compass? Been trying to find out

[@AudioReplica2023]

So easy to reach down there when there's edits done to the footage 😂 Btw... When you planning doing the next brain games season 😭

[@billassim9014]

2014 jeep patriot my mechanic changed, but it had been replace 4 yrs ago so he had to rewire, it, now car won't start, help

[@Virginia_Gurlie]

How long did it take?

[@renpei8294]

Does the computer need to be resetted?

[@sandygebhart7187]

I was told once it's on it has to be set to the computer is this true?

[@vincecarreras1410]

I have a quick question I have an 07 Jeep Patriot that has the same engine. I was just wondering if you would be able to direct me to where the canister purge valve is located on this engine. I am getting a check engine light with the code p0456 that gave me a gas cap or small purge valve leak. Any help is appreciated thanks in advance.

[@anitatyson6006]

How can you tell if the throttle body needs changing if you don't have a machine to connect it to

[@NotVeryNiceToYou]

Dat ending tho

[@milanmastracci]

+BarberKid LOL

[@c19commander44]

I have a 2007 Jeep Patriot, 4x4 its giving me 16 Miles per gallon right, the throttle light has on a few days ago and it went off. I wonder if the 16 miles per gallon that its giving me is because of the throttle body that needs to be cleaned. Do you guys notice any difference after the throttle body was cleaned. my Jeep suppose to give me 22 Miles per gallon.which is not now.thanks

[@thelimelightexperiment1823]

just bought a 2015 jeep compass. it revs 1500rpm on start up. without revving the engine myself i let it sit idle until the rpms come down to 600rpms before i take off. what is this all about?? im highly concerned.?

[@dinodon1]

You're not installing a sensor @ 6:02 , you're installing the connector to the Throttle Body assembly.

[@brookerleerich]

I have a question??? I missed something in one of the steps....where it got bleeped out. What did i miss?

[@milanmastracci]

+Lee Brooker Don't use a wire wheel or anything that would make imperfections on the throttle plate, or on the area around it. Only clean the throttle plate with the cleaner and a soft brush. That's the just of that part :)

[@dylanpatel40]

+Lee Brooker ...the drive ability of the car may go to SHIT , so don't fuck anything up, screwing around with an abrasive brush. ;)

[@jennifercoffman4204]

What is the sensor called that it connected to the throttle body

[@danielschnwandt5057]

Hey, i have heard something about that you have to set a computer and adjust the Throttle body when you either have cleaned it or attached a new one. Is that true? :-) I have a Vw polo i have an idea that the Throttle body might need a clean :-)

[@milanmastracci]

+Daniel Schønwandt From the cars that i've worked on, you will just need to relearn it with the gas pedal. TUrn the car on the on position with the engine off, and hold the accelerator pedal down for 10 seconds, and then let go. That should relearn the position of the throttle body without the use of a computer. Cheers :)

[@danielschnwandt5057]

+milanmastracci Thank you very much! You are making so awesome videos, keep up the good work man!

[@udeshsalgado7479]

I wanna ask a question I have problem with jeep compass engine is hesitate to rev up and engine light comes up because on of our idiot wash the engine I cleaned all the spark plugs and wire sockets and i diagnose by the scanner and it saying throttle body sensor bank1 how do i come up with this problem?

[@dominicregis7574]

How do you know when your throttle body needs to be replaced?

[@PeterpanPeanut]

When it fails, lightening symbol

[@melblain5091]

My question is not related to this video I have a 2014 jeep patriot 2.0L 6 speed transmiss automatic/manual it doesn't matter but it shifts 1- 6 when you hold shifter to the right it goes into drive some time acts like something was holding it back and then out of nowhere it increases power goes with out pushing the pedal down had 2 different location to check transmission both told good transmission can someone give me help

[@briangibb2056]

How does the sensor remove from the throttle body

[@timskylark]

throttle body bolts torque down to 65 inch pounds

[@rodneysheppard691]

Is the sensor attached to the throttle body the throttle position sensor?

[@dennis-nu8xw]

Doesn’t look like it is

[@telefonetoca]

Any ring or gasket ?