How to replace Brake Switch on Tahoe Cruise Control issue

Step by step instructions video on how to fix my cruise control problem. This is a 2007 Tahoe and it should be the same process for the Suburban Yukon Silverado Sierra. Subscribe!

[@JCling956]

Why anyone would thumbs down this is beyond me. Appreciate the video sir

[@TruckMaster]

Thanks

[@hectorjaramillo8344]

@@hotfoxchic2007 the video did help thanks for showing how to fix the brake switch it was very helpful

[@jczrapper]

I had the exact same symptoms in my 09 Tahoe. For $12 and 10 minutes of time, I now have cruise control working again. I could only imagine what would have happened if I took it to the dealer. Thank you for doing this video.

[@TruckMaster]

+Saleen Cthreethirty I thought the same thing about how much it would cost at the dealership glad it worked out for you

[@rstewart2169]

Great video, worked for me. I was without my cruise for 2 years because I thought it was a dealer repair. Watched your video then called the dealer for the part. They wanted $30 for it. I got it in 3 days from RockAuto for $12 including shipping! Took 10 minutes to install thanks to you!! 👍

[@tiredlawdog]

Fantastic video. No laughing and joking. I really don't know how you got the camera on what you were doing, but you did a great job. Thanks a lot.

[@Ridingwithkenny]

thanks for showing how to get that clip off, I have a 2007 escalade and i had the same problem.buti could not get that clip off , but i know now thanks for the detailed video

[@taneshajohnson7307]

You truly helped me. You saved me some money. You showed me how to remove clip. I paid $9.00 for part. It took 5 minutes to replace with a butter knife. Thanks

[@brettbailey2911]

Thanks very much for posting. Glad to have cruise control back for those long trips!

[@fortnitearjun288]

Had the same issue with my 2011 Tahoe. Watched your video today and picked up the part. Just finished replacing the switch and cruise control is functioning again. Thanks for uploading!!!!!!

[@TruckMaster]

Awesome!

[@popeyeandy959]

I had a similar issue with my wife's 2009 Sierra. Yes it was the brake switch. I would not have thought of this without this video, so thanks for that. My clip had bolt through it, threaded into the stub on the brake pedal arm. That was a pain in the butt to get off due to the awkward angle. But once past that, it was smooth going. Thank you.

[@cosascaseras1601]

Thank you for this. very awkward position to shoot in, but you managed to get all the details

[@TruckMaster]

No problem thanks for the comment

[@randysheahan585]

Thank you. Used this video a couple months ago to fix my Yukon. Great job getting a good camera shot being in such tight quarters.

[@farhanrasheed3833]

Excellent info. Simply explained for easy following. I am having same issue and this video has made it easier for me to go ahead and replace the break switch on my Chevy 2007. Thanks!

[@martinhightower9801]

You just saved me $200. Worked perfect. Took more time to get the part than install it. Thanks!!!!

[@wyoprospector]

Great job showing how to get the stupid clip off and on thanks a bunch.

[@EngineerGorman]

this also fixed a trailer brake controller on my 2008 Tahoe. i had the exact symptoms with the cruise control. originally i was diagnosing a problem with a trailer brake controller and noticed that the blue/white wire (brake switch) was always high (12v), even when the brake pedal was not being pressed. normally this wire should go to low (0v-gnd) when the brake is not being pressed. this was causing the trailer brake controller to malfunction (as well as the cruise control). after replacing the tahoe brake switch it fixed the problem with that blue/white wire. everything working great now. thanks for posting!

[@TruckMaster]

That's weird how it corrected the trailer controller but I'm glad you figured it out

[@codygriffith6168]

I had exact same issue , I'm guessing wire is too thin

[@MBSF98]

Thank you so much. The other videos I watched had a bolt that had to be removed. Apparently, only the 2007s have just the clip. Couldn't figure out how to get the clip off until I found your video. Took me about 5 minutes to switch the part. Thanks again.

[@TruckMaster]

+MBSF98 same here that's kind of why I made the video. I'm glad it helped thanks

[@MBSF98]

BTW- I was having problems with warnings to service stabilitrack, service traction control and the ABS light coming on after 5-10 miles in addition to the cruise control not working. Since changing that part, the cruise control now works and I haven't had any warnings so far after about 150 miles. Thanks again.

[@rudesoto]

I have a 2008 Suburban ltz. Exact same issue. Took me 5 minutes to replace and now my cruise control works. Thanks a ton for this video.

[@TruckMaster]

+rudesoto that's great glad it worked out

[@blurr0987]

New switch installed (AC Delco D1539J) and my cruise control is working again. Great guide.

[@TruckMaster]

+blurr0987 awesome glad it worked

[@vlo9079]

Thank you so much for posting this!!! Especially the part #. You rock!!

[@georgelittle4070]

great video unlike others on you tube you made sure to have a good camera angle....thank you

[@jsimish]

Thank you SIR for showing that damn clip CLEARLY !

[@johnpfw]

This fix also worked for my 2008 Chevy Avalanche - thanks for uploading.

[@bomesh3an]

thank you a million time. you just solved my Dad's problem on his Avalanche. great work and awesome clip. best wishes .

[@TruckMaster]

Thanks for the comment Im really glad it helped out

[@markvela8152]

Very helpful. Fixed my problem. Think you so much for your help.

[@curtchapman3658]

super helpful man. Thanks so much. did the same on my '11 suburban and it worked

[@TruckMaster]

No problem

[@dd5450]

Really well done. Clear, concise, and complete.

[@TruckMaster]

+d d thanks

[@ternyb1391]

Thanks! You’r your video helped immensely! I tried this and I was wondering why my light kept coming on. When i saw your video i found out i put it on facing the wrong direction! I didn’t even know that could happen😅 !

[@toddmott4047]

Thanks for sharing! Worked for our 2009 Tahoe.

[@chrisnshoe]

Thank you for this video. All other videos I saw used a 10mm bolt. This worked great for me on my 07 Avalanche.

[@TruckMaster]

I'm glad I could help out

[@sge46]

Great DIY. Just did mine. Thanks for sharing!

[@muneebmujahid5485]

nice videotape the first time since I have been working on a basic car

[@joelnickerson6739]

That's how I did mine on my 2007 Chevy Silverado. I did put a little grease on the post to reduce wear. Thanks for posting.

[@MrSbragg1]

Just ordered the switch from Amazon.. very helpful video.

[@vlo9079]

Same here. I'm glad the OP gave us the part number.

[@Tmask32]

Wow looks easy thanks for the upload!

[@charlieeder]

Thanks so much. Saved me a lot of money and headache.

[@TruckMaster]

No problem I'm glad I could help!

[@AlexGarcia-kf6cz]

This really worked! Thanks bud!

[@californialove1711]

thanks man, you saved me a day and cash.

[@TruckMaster]

Glad I can help!

[@mendozamendoza7278]

Thx you so much for info my crusie control on my 2007 denal works perfect now ✌✌✌✌

[@TruckMaster]

+Mendoza Mendoza awesome man

[@user-vs6hx9ib2o]

Thanks so much! Worked like a charm & we aren't handy or car types at all! The only thing that I'd recco. is that a bottle opening paint can opener (29 cents) was needed to get the clip off; couldn't do it with a screwdriver. Thanks for making the vid!

[@TruckMaster]

+S D awesome glad it worked out for you

[@unreachablelevel]

Thank you sir! This worked on my 2008 Tahoe. Only difference was a bolt (metric) needed to be removed as well.

[@TruckMaster]

+Aaron Alexander yeah I figured they went to the bolt that year I'm glad this helped take care

[@dyuen888]

Thanks for posting - it fixed the problem..... for those that are waiting to do this repair, you can try use your toe to lift the brake pedal and then try to engage the cruise control.

[@TruckMaster]

+dyuen888 that's a cool idea didn't know that work work as well

[@blackhawkip]

Great video. My 2011 Tahoe does the exact samething and has been for about a year and a half. I don't know why I didn't think about searching the reason on google until now. Thanks again for this pretty detailed video.changing my brake switch out tomorrow.

[@TruckMaster]

+CRAIGER D good luck!

[@blackhawkip]

Well, changing the brake switch didn't work. CRAP!! It was simple though.

[@TruckMaster]

+CRAIGER D you might need to have a tech2 hooked up at the stealership to find the problem

[@blackhawkip]

Well, evidently changing out the brake switch DID fix my cruise control. I don't know why it didn't work on my test drive after I changed it out. Works like a champ again (drove the Tahoe on a 8 1/2 hour trip).

[@blackhawkip]

Well, after I replaced both front hub wheel assemblies, I took the Tahoe out to the Hwy and low and behold, THE CRUISE CONTROL WORKED!!! I don't know why it didn't work on the test drive after I replaced the brake switch.

[@blackwing1074]

Thank you this video help me solve my problem in my 2008 Cadillac Escalade

[@TruckMaster]

+Eivo Rodarte nice I didn't think the escalade would be the same

[@blackwing1074]

Truck Master I didn't think so either. I am just glad it work out and it's all thanks to you.

[@johnreid859]

Excellent help

[@poisonalloy6157]

Very helpful used this for my 2009 Cadillac Escalade

[@Leon-wh2si]

I have same issue on my 09 Escalade. Did your brake lights work before you changed switch?

[@DobermanLover]

Awseome tutirial, thanx!

[@TruckMaster]

+Sharon O. No problem

[@Thunderstick15]

Great video man! Worked like a charm. I noticed your service park assist message is on, mine is also on. Any tips on that fix?

[@johnmason-smith]

This worked on my 2009 Yukon XL, however my retainer clip sprang off into Narnia under my dash so now I need to order another. Thankfully mine had an additional 10mm fastener bolt. I was able to space enough washers behind that to hold it together until I get a new clip.

[@Leon-wh2si]

Did your brake lights still work properly before you installed switch?

[@matthewadams9834]

Replaced the switch and a black bumper fell out from underneath the steering column. Im assuming thats the brake bumper because now my brake lights wont turn off. Any idea where this is located so i can put the piece back. Its a 04 suburban. Thanks for any help.

[@JimmyJohnson-ub4rt]

thank you sir

[@glennshaw352]

Son of a bi...... - Thank you very much - great job with camera making video!

[@TruckMaster]

Thanks

[@glennshaw352]

Hey, it fixed cruse control and issues with electronic break. Thanks again!!

[@kennyb7883]

thanks! you da man!

[@TruckMaster]

+Ken Best thanks man

[@rodlopez21]

Thanks man that helped going to install it now. One question do you have problems on long trips with the electrical going nuts inside locks and dash board going crazy?

[@TruckMaster]

No I never had that issue

[@bomesh3an]

hi .check the ground cables .there is many clips about it here on KZbin that's very helpful like this Gentleman .I just fix mine lmfao .😂

[@andrewmel97]

Same issue

[@mkcnvr]

Had the same issue with the locks and dash. Had to replace the ground cable on the battery.

[@jebthereb2]

Dude. Thanks.

[@gioartv5982]

Truck master I’ve watch all your videos brother ...I got a problem ! Hope you can help me .....where can i contact you ? THANKS👌

[@HeyItsDev]

Hey mate, not sure if you’ll see the comment on such an old video, but I was wondering if your brake lights were still working properly before replacing the switch, or did you replace the switch only for your cruise control? Thanks for the video. Cheers.

[@TruckMaster]

Yes it’s still working 👍

[@HeyItsDev]

Truck Master Great! Thanks 👍🏽

[@BringBackMasculinity1987]

Were your brake lights stuck as if somebody was on the pedal? Just curious

[@Chris-pk9jq]

Yes that’s the other problem it causes the brake lights to stay on as if someone is on the pedal and the cruise control won’t work but if u tap the pedal and turn the brake lights off the cruise will work again My 07 Tahoe does the same thing

[@golfrep2584]

Where can I order this part and what is the part #? Thank you!

[@wijibo6772]

You can also knock your brake pedal right or left to get it to work for a bit, but it will still need replaced eventually

[@tylerhartsough9040]

Did your set and cancel buttons feel stiff when it wasn't working? That's the issue that I am experiencing on mine. Just want to make sure this is the issue before I order the part. Thanks.

[@TruckMaster]

+Tyler Hartsough no they were not stiff might be your steering wheel good luck sir

[@chynnaman2006]

when you push the button on the steering wheel,that green light has to come on to show that its working right? because mine doesnt come on & will that cause your check engine light to come on?

[@TruckMaster]

Yes that green light has to come on in order for the cruise to work and No it will not throw a check engine light

[@chynnaman2006]

+Truck Master thanks a lot, I really appreciate you replying back most people don't do it👍🏽

[@4xrick]

I did this but still no cruise control. I scanned it and got codes p0989 p0724 p0573 any ideas?

[@Xx503RePrEsEnTxX]

Where did you buy the replacement part??

[@TruckMaster]

eBay

[@TruckMaster]

Look at this on eBay: www.ebay.com/ulk/itm/331477950392 Brake Light Switch ACDelco GM Original Equipment D1539J

[@38special.]

Wondering if this is what's going on with my 06 Tahoe (State Police package).

[@TruckMaster]

+Heather LaMonaco it could be you should try it

[@38special.]

Truck Master that's my plan as soon as I have daylight (NY)

[@DarrenMalone253]

same likely issue for my 03 Escalade?? No cruise control light or function period!

[@TruckMaster]

+Darren Malone it should be the same since it's a GM vehicle

[@1mantisco]

This can also give it an issue shifting out of park

[@valentineleo5980]

Help!!! just replaced mine per video, and unfortunately it didn't work , any suggestions would be appreciated!

[@TruckMaster]

+Valentine Leo the only thing I can say is have a mechanic hook up the tech2 it should tell you exactly what part needs to be replaced good luck

[@blackhawkip]

Valentine Leo any feedback from this issue?

[@chase9080]

Hi , any updates on the issue ?

[@aaronluis11]

do you guys have a part number?

[@user-vs6hx9ib2o]

AC Delco # D1539J called a brake light switch. GM #25981009 called a stop lamp switch.

[@annamelsha4741]

Tap the side of your brake pedal witg your foot and it works everytime thinks the brake is being applied and won't let it set

[@JorgePerez-ty3bw]

I changed it didn’t work

[@RJ-ex9on]

I swear I just did mine 30 minutes ago,it worked for me... You may bad or a bad fuse or even maybe a shortage in the connector.

[@popeyeandy959]

Was your cruise not working at all before, or only when it was cold it didn't work?