How to replace broken rim or motor C30/C38 electric unicycle (EUC)

[@CrossroadWater]

I swear KZbin is psychic, I'm performing this exact operation on my RS in about 3 hours and this randomly popped up on my feed. Thank you so much : ))

[@joshuajones6113]

Bucket trick = Amazing. Took like 5 seconds on the first try. Thanks!!

[@Derek86ixt]

Thanks for the video bro! My son and I just did a rim swap with your video 💪🏻

[@dictionplacement5467]

can't recall how many times a home depot bucket is useful should always carry one imo

[@Bdubbss01]

Does it matter what type of silicone I use for this?

[@DiegoM.S]

Great vídeo! But...... Where can we get another rim without the motor?

[@saucytess6525]

What I wad wondering can't find any

[@Blox117]

aliexpress

[@eRideLife]

@@saucytess6525 RevRides/AlienRides

[@joshuajones6113]

ewheels...Jason

[@oxidicideextortion8471]

Hey Mate, is it possible if 16 inch rim from Begode T4 (not T4 Pro C32) or 22, 24 inch rim like Monster, Monster Pro HS to put on this motor hub c30?

[@yanickgenest1324]

Hi, what happens if, for example, you remove a C30 rim, and install a C38 rim instead. And vice-versa. My uneducated guess is that it won't be a problem for the motor, but it may be for the motherboard, which is different I guess ? Thanks !

[@Blox117]

makes no difference typically. the stator is the only part that changes.

[@eRideLife]

The magnets aren't the same size, not advisable.

[@Blox117]

@@eRideLife it would just change the torque and max rpm values slightly

[@eRideLife]

@@Blox117 how are you going to physically install a stator with wider magnets in a rim with thinner magnets? The inner rim widths are different sizes.

[@Blox117]

@@eRideLife if the rim is different sizes, but it's likely they made one rim size and put different magnets on the same one

[@laurv8370]

Disappointing, man, you forgot the "take a beer" in between the steps... (remember "how a man changes the oil, vs how a woman changes the oil of the car" story?). Also, "make sure the hanger orientation matches", what the hack is that? You should show it step by step, step 1, mount the hanger, step 2, dismount the hanger and mount it in the correct position. etc. Love your vids. Kudos!

[@eRideLife]

You know I messed up onm the hanger orientation more than once before learning to check lol

[@milordas]

Locktite should be put on bolt, not to hole, lol. If you glue the rim, good luck to open it again