How to replace Crankshaft Position Sensor on a 99 Buick Park Avenue

[@donaldfennell8744]

Great video bro

[@nathanyoung9123]

Them 3.8's last forever🚘👌

[@uponalex]

Nathan Young nah fr 💯

[@thomasward4505]

Pretty good video but you kind of skimmed over the size of the bolts for the harmonic puller and how you actually fitted it in there without hitting the frame

[@MrJayMoney]

I was driving my 02 park Avenue and it was running fine. Then out of no where it couldn’t get above 55 and 2k rpms and started overheating. Pulled over and it shut off before I could get to a parking lot. It would restart but need pedal feathering while starting and running to get it going. Got it towed home and parked it. And now it will not restart. No coolant in the oil and vice versa but a small amount of white smoke comes out the exhaust. I’ve replace coil packs but still no start. It will crank and try’s to start but just can’t. It try’s but can’t get all the way started. Talked to a 3.8 guy and he said it might be my intake gaskets and it was loose in the back. I tighten it and still no start. The cooling system is all basically mud but it had been running fine.

[@uponalex]

Have you checked the compression?

[@MrJayMoney]

I have not. My 99 Grand Prix did something similar and it was coils and then another time the vacuum line on the fuel regulator. This is a video of it trying to start about a month after it’s shut off kzbin.infoQKEVLlbVKOs?feature=share

[@uponalex]

@@MrJayMoney bad coils definitely are common problem on 3800s I had a regal and the coils went bad, bought some auto zone ones and swapped em not even a month later they failed, pulled some from the junkyard and the car ran for 2 years lol

[@MB-ot4mj]

What is a fair cost to get this done?

[@uponalex]

Prices would vary in different locations, out here in Washington it would be somewhere in the range of $250-350

[@thomasward4505]

And did not show how you put the harmonic balancer back on

[@robertfranks3934]

what size are those two bolts

[@uponalex]

Which ones? lol

[@uponalex]

Matter of fact I know which ones you talkin bout and they’re probably a 12 or 13mm

[@fakeaccount4092]

Thanks man!!!!

[@carlosandnatecrazypranks153]

I’m trying to figure out how to get mine off

[@jameseley7635]

Thank you got to do one right now 👌

[@KobeCorona-uj3zb]

Backyard fun thank u

[@uponalex]

🤝🤝🤝

[@jameswelch3796]

I can't hear you bro

[@kinggamingcc1760]

I got a code for the sensor after I replaced everything

[@hansolo1111]

😍😍😍

[@leecedrickjamond651]

💪🏾💪🏾