How to Replace EGR Valve 2005-2010 Chrysler 300

Buy Now!
New EGR Valve from 1AAuto.com 1aau.to/ib/DMEGR00003
This video shows you how to install an EGR valve on your 2005-2010 Chrysler 300. The EGR valve helps to reduce pollution by directing some exhaust gas back through the combustion chambers. If the valve is stuck the system won't work correctly, and if it leaks the engine might stall or not start at all.
This process should be similar on the following vehicles:
2005 Chrysler 300
2006 Chrysler 300
2007 Chrysler 300
2008 Chrysler 300
2009 Chrysler 300
2010 Chrysler 300
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa7v/1AXAA00013
• Pocket Screwdriver
• 10mm Wrench 1aau.to/oNN/1AXAA00010
• 10mm Shallow Socket
• 10mm Socket 1aau.to/oaR6/1AXAA00017
• 8mm Socket 1aau.to/oaR6/1AXAA00017
• Adjustable Wrench
• Pliers
• Block of Wood
• Gloves 1aau.to/oFq/1AXSS00048
• Safety Glasses 1aau.to/oy6/1AXAA00343
• Sandpaper
• Pick 1aau.to/oGf/1AXAA00037
Subscribe: / @trq
Check out our playlist:
Chrysler 300 1st Generation 2005-2010: • Chrysler 300 1st Gener...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@adriannagray2725]

My current issue. Thank you. Very educational and thorough video. ❤

[@JHLancaster]

Very thorough tutorial, thanks! 👍

[@FeLLoNeY]

That’s not 3.5 ?

[@wbckblki8411]

Terrible video, you did not show step by step how exactly to get to and remove this valve, the video already starts off with components already taken apart, if you are going to do a video like this, you should show how to do it step by step, from start to finish and go slow.