How to Replace Front Brakes 03-09 Toyota 4Runner

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@KaylamalonegarzaBlountCoTN]

I’m 29 female and I’m about to attempt this on my own 😮 thank you for the in detail video it gives me the confidence I need to do this job ❤

[@Paulxj-]

I like how he puts the caliper grease on the old caliper and the next shot he has new calipers on!

[@LuxLifeTech]

The best tutorial I’ve ever watched - and I’ve watched a lot! Great job!

[@mrbondohrama]

No grease? No bleeding of new caliper?

[@user-xp3vd9ux5t]

Rock solid video for DIY. Amazing indepth tutorial. It's like have a coach play by play till touchdown...I'm starting my 4th gen 4r brake pad and rotors. Thank you for confidence to do project successfully....

[@rtigert]

It looks like that lower control arm has a huge crack running across it (@4:21). 😮

[@ThePanjatan]

Thank you much Master Chief.....Well informed videos with specs. Like the Do's and Don't. I have been searching for months for online videos on how and what tools need to replace brake pads and rotors 04 4R V6 4x4. Only thing is, not sure what the rotor size is. Either 338mm or 319mm. Any feedback would be appreciated. Starting my brake project next few days. Will be looking on your site for parts...

[@adriancast34]

Does it matter if the M clip is at the top or bottom? I’ve watched a few videos and some people put on the top and some people put on the bottom.

[@bh5697]

Wondering the same I had mine on the bottom

[@bobhardee9263]

What if you inadvertently take the other bolts off and the caliper comes apart and leaks brake fluid all over? Also how do you compress the calipers in to accept the new pads if you don't buy new ones?

[@kirkmachado3314]

He just shows up with a brand new caliper after cleaning up the old one 😂😂😂

[@theLocoAirstreamer]

How about a link to the rears? Are rear virtually same procedure?

[@gmannly]

The rear brakes are different. kzbin.info/www/bejne/eorLi4hrYt6oo6s&ab_channel=TRQ

[@Nonthanburi2]

What size are the rotors, 319mm or 338mm? 07 6 cylinder, 265/65/R17 112T.

[@gmannly]

The front rotors on the V6 4 Runners are 319mm. For the V8 Limited and Sport they are 338mm.

[@ethanknight2046]

Thanks for this. Feels like an ASMR video too lol

[@kracksmith4ejm1]

did you change caliber at 5:45

[@mcdonoughshawnp]

Ya, that’s a new rotor.

[@derekgodwin]

yea he did. it magically got brand new

[@fabianbartasco6391]

Great and detailed explanation. Thanks a lot.

[@missbrittsportfishing]

Has anyone ever had the tire seize when mounting? What is the solution?

[@AntonioClaudioMichael]

13/16 fits the lug nuts way better then a 21 mm

[@alibalaghi8442]

My 17mm are frozen what do I do

[@solo4610]

Using old calipers pistons have to be retracted with a C- Clamp most important knowledge!

[@brianlopez2931]

Not on these

[@dirtrider6090]

You hit it with the impact then torqued.. it’s over torque now

[@soulofanunknownsoldier8066]

Lol... no he didn’t man. The wrench only clicks when it’s at the given torque specs. So if it hadn’t clicked when he first started torquing he didn’t impact it to the point it was at 91 ft lbs. Hope that makes sense

[@grichmond6089]

i watched this 3 times and the removal of the hub is not there worst video ever i seen most important part is not there