How to Replace Front Lower Control Arm 2001-2007 Volvo V70

Buy Now!
New Control Arm from 1AAuto.com 1aau.to/ia/1ASLF00257
This video shows you how to install new control arms in your 2001-2007 Volvo V70. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle.
This process should be similar on the following vehicles:
2001 Volvo V70
2002 Volvo V70
2003 Volvo V70
2004 Volvo V70
2005 Volvo V70
2006 Volvo V70
2007 Volvo V70
Tools you will need:
• Pry Bar 1aau.to/tGf/1AXAA00020
• 21mm wrench
• 18mm Socket 1aau.to/t77/1AXAA00043
• 19mm Socket 1aau.to/t77/1AXAA00043
• 1/2 Inch Air Impact Gun 1aau.to/tnC/1AXAA00252
• 3/8 Inch Air Impact Gun
• Ratchet 1aau.to/taY3/1AXAA00016
• Torque Wrench 1aau.to/tae3/1AXAA00044
• 6mm Allen Wrench 1aau.to/tbU/1AXAA00007
• Hammer 1aau.to/tJe/1AXAA00091
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@joeKisonue]

Very similar to BMW. Getting those bushes turned and getting bolts started is challenging and shouldn't be done gung ho. You will destroy threads

[@Dravito94]

Hi. By what you determine that lower control arm needs to be replaced?

[@reboot_4862]

at 6:17 it looks like the cv joint is out of place; is that part of procedure?

[@mzz1833]

Only the left side that doesnt help... On heynes book stood that on the right aide you have to loose the engine and lift it up otherwise you cannot loose the bolts... Is that correct??? Please add some information to this

[@benjaminhernberg8487]

thank you!

[@TRQ]

+Benjamin Hernberg Thanks for watching our video! 1aau.to/m/Shop-TRQ

[@jamesmagana97]

My two 18mm headed bolts are stuck! What would you recommend?

[@LucasEdinburgh]

You need to learn how to use a torque wrench apart of that not bad son.

[@sillysciben8092]

imagine doing all that and not showing the ball joint being replaced aswell lol

[@martinbolton6700foxhunter]

Should always use new bolts.

[@gustavrunsten9287]

Not new bolts?