Volvo XC60 Lower Suspension Control Arm Wishbone Replacement Due to Excessive Play in the Ball Joint

Volvo XC60 Lower Suspension Control Arm Wishbone Replacement Due to Excessive Play in the Lower Ball Joint.
#controlarm
#wishbone
#noisysuspension
Disclaimer:
The content used in my videos are intended for educational and informational purposes only. I do not take any liability or responsibility for any damage caused while viewers trying similar type of practices on their properties. All rights to the images, music, clips, and other materials used belong to their respective owners. I do not claim ownership over any third-party content used.
Copyright Disclaimer:
Under section 107 of the copyright Act 1976, allowance is mad for fair use for purpose such a as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statues that might otherwise be infringing. Non- Profit, educational or personal use tips the balance in favor of fair use.

[@jeffcmb1968]

Nice video. One thing: torque setting are very important. "Tight enough" is asking for trouble. The front control arm blot should be torqued to 103 then another quarter turn. the rear two get torqued to 130.

[@stevenics5599]

Mr khan, where did you source the replacement control arms from? thanks.

[@diykhan]

From local auto parts shop but its widely available on ebay too. Good luck 👍

[@k3v_mully509]

Nice video. You need to get the car aligned after replacing control arms, just in case you weren’t aware. Are you using ordinary sockets with an impact wrench? They aren’t designed for that. You need impact sockets. Ordinary sockets can break easily.

[@hatfieldstudent6573]

Mr Khan, what was the symptoms of the problem e.g were you getting a clicking sound when turning right, or did you have some play on the wheel either at 9 o clock to 3 o clock movement or 12 o clock to 6 o clock movement, Thanks

[@diykhan]

There was excessive play at 12 o clock to 6 o clock.

[@hatfieldstudent6573]

Thanks, I get a click, click noise when I am turning right, do you think it is the control arm @@diykhan

[@jeffcmb1968]

@hatfieldstudent6573 Sounds like a bad cv joint