How to Replace Fuel Pump Module Assembly 2002-2005 Ford Explorer

Buy Now!
New Fuel Pump Module Assembly from 1AAuto.com 1aau.to/ia/1AFPU01359
This video shows you how to install a fuel pump on your 2002-2005 Ford Explorer. Combustion engines need three things to operate: fuel, air, and spark. If your fuel pump isn’t delivering the fuel your engine needs, it will run poorly, or not at all. Or, the pump is fine, but your fuel gauge isn’t working. Many modern pumps include an integrated sending unit. Either way, a new engineered to fit fuel pump for TRQ is just what you need.
This process should be similar on the following vehicles:
2002 Ford Explorer
2003 Ford Explorer
2004 Ford Explorer
2005 Ford Explorer
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oCh/1AXAA00013
• Pry Bar 1aau.to/ohR/1AXAA00020
• 13mm Wrench 1aau.to/oim/1AXAA00010
• 10mm Socket 1aau.to/oxT/1AXAA00017
• 15mm Socket 1aau.to/oCc/1AXAA00015
• Pliers
• 1/2 Inch Air Impact Gun 1aau.to/ocy/1AXAA00252
• Ratchet 1aau.to/oET/1AXAA00016
• Cloth Rags 1aau.to/oeD/1AXSS00035
• Gloves 1aau.to/od2/1AXSS00048
• Rust Penetrant
• Safety Glasses 1aau.to/ocP/1AXAA00343
• Drain Pan 1aau.to/odS/1AXAA00320
• Jack Stands 1aau.to/oiw/1AXAA00065
• Pick 1aau.to/of8/1AXAA00037
Subscribe: / @trq
Check out our playlist:
Ford Explorer 2002-2005 3rd Generation: • Ford Explorer 2002-200...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@scottnyc6572]

Wow the rust really is winning the battle on the undercarriage.Thanks for the video!!

[@heli0s2003]

I'm just imagining this my own car right now, and you're actually fixing it. Got some work cut out for me. Thanks for the thorough how to.

[@LA_Commander]

Great video Lenny! You are a great teacher. As an aside, it's always a good idea to replace the fuel filter with a new one at the same time you are installing a new fuel pump. Also, those two charcoal canisters on top of the fuel tank can be replaced as well; on many older vehicles these are clogged-up and it makes it difficult to pump gas in.

[@cherict3400]

Your video is so comprehensive! I appreciate that you showed each step to get everything off and then back on! I watched other videos that only showed a few steps which made it very confusing.

[@richardpetroche2569]

Excelent video!! Thanks for teach us !!?

[@thelonelyrogue3727]

I'm having some issues getting the bolt out of the fuel strap. It seems to be angled towards the driveshaft too far to get the socket on. Any advice, or do I just need to drop the shaft?

[@quittouchingshtt1]

Those hands are going places

[@mc2e100]

Excellent video. Thank you.

[@HibatAllah]

Great video.... I learned just what I needed to know, and some..... im curious to know what was the result of the 2 broken bolts on the bottom of the crossmember ?

[@billfreeman6377]

Great video...nice job

[@whiskeyfamily6717]

Love how they skip over the bolts he snapped off on the cross frame

[@Airsally]

Very well done vid.

[@jamal69jackson77]

This truck didnt have any actual metal parts, just solidified, hardened rust holding everything together lol. Great video though!

[@angelcintron2122]

I replaced the fuel pump and filter, in my 2005 Ford Explorer but the engine seems to be starving for fuel. I replaced the fuel pressure sensor on the fuel rail, also, but it doesnt want to rev any higher then about 1200 rpm , and the fuel lever doesnt register properly. it shoes a negarive sweep towards empty,. would a stuck fuel level float arm keep the engine from running properly , by telling the ecm that there is not enough fuel in the tank..i know that im gonna have to drop the tank again to properly seat the fuel pump/sending unit in the tank because of the stuck float, but this float issue is driving me crazy. Thanks in advance.

[@adelaferreira4575]

Thank you so much that video explains everything very accurate ,only one question ,what year is the Explorer ?

[@landmasterdave5066]

I have a small 1/8" broken line leaking fuel by the rear differential . what is this line/vent? brownt in color with no sheath.

[@ArthurNetteler]

What a RUST BUCKET!! My 1992 Texas Explorer has NO RUST, even still PAINTED FRAME!

[@brucegambill6303]

What about the two bolts you broke on the bottom of the crossmember?

[@AirConditioned]

8:58 wish i would've watched this first.

[@adelaferreira4575]

Price of the gas pump assembly ? Explorer XLT 6 cyl 2002

[@IAm-lh9kc]

I would have mentioned exactly which car I was working on in this video.

[@ray29999]

What's the difference between this year and a 2010? Looks the same underneath...

[@RickyJohnson-nt1km]

Good vidio Lenny done well how ever guys trying do this from ground much harder as you have very little space work shade tree mechanic s will caith hell puting gas tank up down as your did it right like at shop standing point out also I've done a bit these and even cut out holes had cut xmrnbers to get the oumb out they should put plates seals on all these elec pumps to easyer remove the pumps if u guy can still get just the pumb assy do this on the short pumb hose use only solid clans not one ls with little cuts in them you br replaceing new pumb hose again time u out it together or soon after as they cut line when tite stay safe with gas and always use eye protection slickrick midway Georgia

[@jamespace5064]

How can you tell if it’s a 7 or 8 pin fuel pump????

[@courtneyspringfield8233]

Ok ❤️ ttu in the morning gn 😊 ty

[@dennyclosser8456]

Nice job brother, I hope you had a tetanus shot, that reminds me of working on my vehicles when I lived in Michigan!

[@josedejesusluperciorodrigu4184]

Por que con el cambio se siente muy burra la camioneta

[@rickeycampbell2037]

doesn't apply to 2005 sport trac

[@LA_Commander]

Different chassis. That one uses the older pre-2002 chassis of the Explorer

[@rickd650]

Good God, is that a Yankee car? That's some rust up under there. Salt?

[@huntermitchell7989]

So rusty