How to Replace Power Steering Pump 2008-2012 Honda Accord 2.4L

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@Theesvpremekai]

This is a very easy repair and if you have the right tools it does not take long at all. 2/5 difficulty and that’s because of this video. Thank you so much, this helped so much!

[@Goztepe-uf6si]

Amazing video, i was able to save 300 bucks because this video gave me the confidence to do it myself and i did it. It works as good as new now.

[@Riel2Reel]

Thank you for this video. I’m not a car guy by any means but it took me 40 min (including prep time. Flush etc.) to change my own PSP using your simple to follow instructions. Awesome!!

[@rodcosta2345]

Holy cow that was well filmed, concise and educational! Thank you!

[@richierich4604]

very good video ,very well done no excessive apologizing str8 foward and to the point . bauer make some good tools for cheep

[@mktwatcher]

You should have also replaced the O-rings on the Suction / Inlet and High Pressure Outlet side too.

[@majinRA]

Great video. Professional and no filler.

[@frankc5385]

Clean and Straight to the POINT!!!👍👍👍👍👍

[@afatherofmany]

When you started the motor, I heard that rattle is that part of the VVT system that needs to be checked? Mine does the same thing and I’m trying to figure out what it is.. it’s not the motor tapping or anything but it does it briefly on start up

[@roby14]

Great video. Thank you. No seals or orings to change?

[@stevealaska73]

I heard your Accord do the same thing mine is doing and that is when you first start it, it rattles like there are metal marbles being rattled for a few seconds, again, right at start up and then it stops. Any idea what that might be? Thank you in advance for your answer!

[@johnsycj]

Great video. I feel very confident that I can execute this now. Thank you 👍

[@duanegarner2792]

Where can I get the bar used to remove the 14mm bolt for the pulley belt. I have no clearance or leverage with my offset wrench. I need that low profile bar! Thanks in Advance

[@rogelioarias5416]

This video made my day!👍🏼so helpful!👍🏼

[@LaurenceSheldon]

I'd like to note that this should also work for the 7th gen Honda Accords (2003-2007), as the engine (K24A4 for US model) and pump are the same models.

[@19211926]

Why not change the fluid too? Or check the hoses for leaks?

[@ron-uc9mf]

is their a gasket that needs replacing on the pressure line?

[@chrischavez4425]

I got a quick question, do you have any solutions on how to fix the noice on start up it makes for like 2 seconds the cracking noice it makes after leaving your car off for a while/overnight?? Please let me know

[@klausgersdorf8315]

What about new o rings for hoses???

[@frankelizalde9306]

New “O” ring needs to be installed at high pressure hose ( top bracket ).

[@e1ementskater35]

Is this part specific to the 2.4 or will it also work for a 3.5 v6?

[@emangee9268]

Have gained experience and knowledge of vehicles by working at an auto parts store and based on the 2.4l and the 3.5, those would be different engines so I'm sure it will be different power steering pumps.

[@philochristos]

That looks pretty easy.

[@floppaking8746]

How did you not have to bleed it?

[@ThePlatinumChild]

What’s the name of the tool to pull the tensioner a regular ratchet won’t fit

[@AngelHernandez-br6hx]

Anyone steering wheel hard to turn after replacing the pump ? I felt like I’m driving a race car having to pull that steering wheel back & forth trying to get it loosen up

[@jasonkubitz9410]

What's the quality of this pump? I've read some mixed reviews on Google.

[@davidolivera4550]

Thank you!

[@robyparker2027]

yes there is a gasket that needs to be replaced on the high pressure line or else it will leak.

[@andy164501]

I wanna know what that power tool is. Nice, battery operated, impact wrench - tried to catch the mfg but just didn't get a good view of it.

[@nicholaspetre1]

This did not look like the fluid recommended by the manufacturer as Honda’s fluid is sold in a totally different bottles. What did you use?

[@joehooton1880]

Thanks!

[@ivan76mrg]

No air bleeding? I did everything as shown in the video, but when I started the car, the fluid became bubbly and eventually overflowed through the reservoir. I let it stay for a night, in the morning the liquid looked fine and I did the air bleeding, but the results are the same: the liquid becoming very bubbly. If someone know that's the problem please let me know

[@smartin1601]

Thanks amigo

[@fernandotirado1913]

You need change o rings replace the belt

[@Tgod757]

What is the name of part power steering is bolted to

[@ulisesvillanueva-vasquez7479]

Prices of part???

[@IncogKneegrow1]

Don’t forget the O-rings

[@laloca4040]

why did you change the power steering sensor ???????

[@mikebazil1]

Thankyou

[@smokeysmith1282]

This cat don’t play!!!!

[@fernandotirado1913]

And torque to recommend specs

[@jacobrosette5931]

What the correct name for the tension pulley star screw and where can I purchase it

[@JoseMartinez-2018]

Why don't you guys do the proper torque specs ? You just tighten the bolt is that the correct way just to guess?

[@reekinhavok420]

That’s too easy

[@Ske3849qw]

What’s the torque specs for all bolts?