How to replace rear brakes and rotors on Honda Accord 2018 2019 2020 2021 2022 (EPB)

Due to factors beyond the control of RB The Mechanic, it cannot guarantee against unauthorized modifications of this information. RB The Mechanic assumes no liability for property damages or injury incurred as a result of any of the information contained in this video. RB The Mechanic recommends to follow safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of RB The Mechanic, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not RB The Mechanic.
RB The Mechanic. All rights reserved. Publication, reproduction or distribution of this or any video by any means whatsoever, including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world, is strictly prohibited without the prior written consent of RB The Mechanic.
#accordrearbrakes #epb #electricparkingbrake #2018accordrearbrakes #2019accordrearbrakes #2020accordrearbrakes #2021accordrearbrakes #hondaaccord #hondarearbrakeservice #hondarearelectricparkingbrakes

[@David-yh5po]

Thanks for sharing this video with us ❤ for all the poor people who can't afford to pay the mortgage at the dealership.

[@RBTheMechanic]

Welcome!!! No need to go to dealer to pay and mess up ur car best u do it urself!!! Clean grease and do it correctly make the best out of the brake job

[@cardo1111]

lol. Well-said.

[@Yomama.6.9.]

Dam I should’ve looked this up before sending my car out to the shop. Cost me 500$. Smh

[@pedrobetancourt]

Brah you don't need to get the electric actuator off just rotate the piston with some pliers and then press it

[@samuelrosa4074]

😂😂😂😂

[@miguel1530]

Great video. I bought a brake caliber compressor from harbor freight and turned the gear with the 8mm and it worked. Thanks again for the video and instructions.

[@RBTheMechanic]

Nice job!!!

[@TheBitwiseBeat]

Man. This video was a life saver. Ended up having to drill out the retaining screw and just didn’t put it back on.

[@RBTheMechanic]

Yeah those r not nothing important

[@AlanTheBeast100]

Me too. Both wheels yesterday - used penetrating oil for 10 minutes ahead! Have to wonder why they bother putting it in in the first place.

[@W.O.E]

Bruhhh you saving my life I finally started working on my car for everything. You need to create a playlist for all Honda accords changing different parts out for those years I have a 2018 1.5t….you saving my life and money! I’m a subscriber for life and I support you 100%

[@RBTheMechanic]

Oh ok will do soon make a play list

[@AlanTheBeast100]

There is no need to remove the motor assembly. Twist the piston back. (Makita ginder key fits perfectly).

[@RBTheMechanic]

I like my way safe and to the point no issues!!

[@chrisk8522]

Saved me so much headache worked perfect on my 2018 accord 2.0t rear brakes .. thank you so much !!!

[@RBTheMechanic]

Nice good job!

[@user-yy7im1tp6s]

Excellent video! Your illustration is on point! No questions asked!

[@RBTheMechanic]

Much appreciated!

[@redwolfmendoza]

Thank you for the awesome video sir. I'm about to do this job on my wife's car this weekend.

[@RBTheMechanic]

Good luck!

[@TomCarr-id2fe]

Excellent video. Just finished my daughter's 2019 Accord. What a nice bypass to having to use the computer for the parking brake. Thanks so much!

[@RBTheMechanic]

Glad u liked and used the video!!!

[@ninjellica]

Thank you so so much! I already did my spark plugs yesterday on my 2.0 by following your videos! 🙏🏻 I’m going to do this next. Very helpful videos and great teaching skills!

[@RBTheMechanic]

Cool update me how it goes

[@HABIBI_SOUR]

@@RBTheMechanicwhere you are locate it at

[@RBTheMechanic]

@@HABIBI_SOUR north nj Bayonne ru local?

[@HABIBI_SOUR]

@@RBTheMechanic I’m in Manhattan how much you charge for the rear rotors and front brake pad ?

[@RBTheMechanic]

@@HABIBI_SOUR this car with electric caliper labor is $190 + parts that varies on bran and quality they could be close to $140 in parts

[@JohneRandom]

I am from the C - Clamp days...brought my son in law over my big C clamp to change my daughters brakes and he couldnt use... he ended up using a caulking gun to compress the caliper --- hey... it worked :) .... but guess what he forgot at the end of the day and the sun already set.... the little sensor :) -- anyway -- thanks for this vid -- good stuff and you're a great teacher.

[@RBTheMechanic]

Lol yeah he did good tho plug that back in

[@celesteruiz3533]

Very informative video! Thank you so much you saved me some money.

[@RBTheMechanic]

Nice good job!! And nice to save Monday!!!

[@christopherreynolds2704]

Wow what a great video. Thank you for the knowledge.

[@RBTheMechanic]

Our pleasure!

[@vincemorenomusic]

Great instructions man. Thank you

[@RBTheMechanic]

Yup thank you!

[@feeshermann726]

Fantastic video! Thanks for the excellent expanation!

[@RBTheMechanic]

Welcome

[@urbanosalazar6943]

Gracias RB mecánico,primera vez que cambio este tipo de balatas, me aventé como 3 horas en un lado, se me hizo noche mañana pongo el otro lado.

[@RBTheMechanic]

Welcome but idk what u said

[@urbanosalazar6943]

A said it take me 3 hours to do one side, tomorrow I will the other side.

[@DavidPerez-dg8sb]

Thank you so much !! Este video es de gran ayuda

[@RBTheMechanic]

Welcome

[@Maverick1948]

You are a great teacher

[@RBTheMechanic]

Thank you! 😃

[@manuelsandog2876]

First time ever and the screws in the middle of the rotors where impossible to take out I had to destroy them and buy new ones at honda, doing the whole thing all 4 it took me 8 hours nonstop since I had to go to honda and come back, besides I also lacked tools it was a nightmare, but worth it since saved a lot of money

[@RBTheMechanic]

Yeah next time it will be easier and quicker

[@user-ww9on3ks3i]

We need more people like bro. Good job keep up the great work

[@RBTheMechanic]

Yup thank you

[@anilshah8360]

thanks for sharing, and a video is very well done, thank you!

[@RBTheMechanic]

Yup thank you for feedback!!!

[@JMonty215]

Nice and clean tutorial thank you 💪🏽

[@RBTheMechanic]

Yup thank you!!

[@JMonty215]

@RBTheMechanic what's crazy I got the same parts coming in thursday, Cause of your video i'm confident I can Completely do it myself. By the way do you do any DIY modification videos ? I'll keep a look out for 2020 2.0T honda. 🤝 sub 🚨

[@eliminator1579]

Best explanation i have seen so far. Nice video

[@RBTheMechanic]

Yup thank you

[@josephbermudez8006]

very helpful brother , thank you!

[@RBTheMechanic]

Yup! Welcome

[@luissecundino4009]

Thanks brother you’re a lifesaver..

[@RBTheMechanic]

Welcome

[@hientang3591]

Thanks for your video

[@RBTheMechanic]

Welcome!!

[@Composedblackness]

Thanks you bro, really appreciate it.

[@RBTheMechanic]

No problem!!

[@raulsantos6209]

Love your videos bro keep doing more

[@RBTheMechanic]

Yeah thanks right now I’m injured but I got video that need editing for like 300 videos I’ll get better and come back at it

[@raulsantos6209]

@@RBTheMechanic hope for a speedy recovery

[@ryanolsen6622]

Excellent video

[@RBTheMechanic]

Thabks

[@diegoordonez2677]

Nice job and thanks to show

[@RBTheMechanic]

No problem 👍

[@Romeome99]

Thanks for sharing your skills, what about Honda pilot 2023, does it have the same PISTON? any difference on this model than others?

[@RBTheMechanic]

That one might have same but not sure yet haven’t got the truck in yet for brakes but I think it might be regular compress caliper

[@cristianortiz1684]

2023 pilots don’t have electric parking brake they have a mechanic foot brake. You should be able to just press the calipers no problem. My bad, I confuse the 2022 and 2023 a lot. It should be the same system.

[@elliezepeda1532]

You compress the piston by removing the cap on the break fluid container. It will release the pressure from the break lines.

[@RBTheMechanic]

Yup it sure will

[@KingLota3]

Thank you man foreal

[@RBTheMechanic]

Welcome

[@reverendrobertruis347]

Thank you!

[@RBTheMechanic]

You're welcome!

[@jorgeislas5790]

Gracias me alludar mucho

[@user-uy4on5ko9u]

can I follow the same process, regarding changing the rotor and brake pads on the 2021 10th gen 2.0T?

[@RBTheMechanic]

Yup very muck alike

[@user-cu1kt4cu6k]

I did the brake pad replacement but didn’t do the step of compressing the brake caliper. Not my accord is throwing up brake system lights and alerts. Not sure what to do

[@RBTheMechanic]

How could u do the brake without compressing the caliper?

[@Jaylikescar]

I think i rented a caliper tool and spinned the cylinder and it went in but its been fine for years lol not sure if its the proper way to do it.

[@RBTheMechanic]

Electric parking brake u need to wind it

[@fatboys5503]

When you compressed it with a 8mm . Do you go back to how it was or leave it as is ?

[@RBTheMechanic]

U can leave it there and then once’s ur all completed do the calabration process it will find its spot back to perfect spot to release the brakes

[@thomasdavidson8328]

So if I have a scan tool that will put the rear in brake service mode, I don’t need to remove the motor to compress the piston right

[@RBTheMechanic]

That’s correct!!

[@norbertocelerino2277]

hey , what do you suggest on how to fix the E brake Sensor I accidentally pulled both wires off the connector. Thanks

[@RBTheMechanic]

The actuator? Or the u broke the wire connector

[@norbertocelerino2277]

The wires inside the retainer got pulled off. It’s the sensor for the actuator.

[@ronaldrutledge1243]

Great video man. Do I need to bleed the brakes?

[@richardfabrizio8998]

Not unless your going to flush the brake fluid

[@RBTheMechanic]

Not if ur only replacing pads and rotors as long as u didn’t remove any hydraulic lines that would let air in

[@JablonskiV]

Did you have to put the car in maintenance mode?

[@RBTheMechanic]

No

[@daquandandridge8872]

What spray did you use to clean the rotor off?

[@RBTheMechanic]

Parts cleaner

[@japaneseryu5787]

nice video but you can use C clamps/C clamps vise grips though

[@RBTheMechanic]

Nope not on the u will damage the caliper and acuator

[@eddiegarcia1057]

do the allen bolts need to be torqued?

[@RBTheMechanic]

If you have the specs and have the torque wrench go for it

[@cheryadams1200]

Good job bro I will save $200 😊

[@RBTheMechanic]

Great 👍

[@DAKACTHER]

Do you have a link to the brake pads you used?

[@RBTheMechanic]

No sorry this I purchased from my local part store

[@mr.r59]

Will this work for a 2024 honda Accord hybrid

[@RBTheMechanic]

No

[@RBTheMechanic]

Process is similar tho I haven’t gotten any to do yet so far

[@damionbennett3593]

Mann I just did my rear brakes and now when slowing down it makes this spring like sound hard to explain

[@RBTheMechanic]

Double check all of ur work hopefully nothing is loose

[@Xekken1]

how do i turn off the brake warning light after?

[@RBTheMechanic]

Ur not suppose to have any light. Did u connect back the connectors?

[@williamrohde686]

Where did you get that compression tool

[@RBTheMechanic]

It’s old blue point from snap on

[@neelpeters]

Good video where do I buy the rotors bro

[@RBTheMechanic]

Any auto part store but this coated rotors u maybe have to do some searching

[@fright_nike09]

I thought I was the only one who says wiggle woggle 😂

[@RBTheMechanic]

Hell yeah wiggle wiggle bang zoom badabing badabiom shebang

[@ColbyGoatvington]

So you dont need to put it in maintenance mode?

[@RBTheMechanic]

Yup I can if u got scan tool or do it this way

[@theschuntz]

What kind of brakes did you use?

[@RBTheMechanic]

Power stop pads high quality electric coated rotors

[@notee6183]

Do you have to remove the sensor?

[@RBTheMechanic]

Which sensor or do u mean brake acuator

[@notee6183]

At 1:20-1:25 in the video. Do you have to remove the sensor?

[@RBTheMechanic]

@@notee6183 yes

[@sherm848]

What's the torque specs for those bolts?

[@RBTheMechanic]

What year make model and trim is ur accord

[@sherm848]

2018 honda accord lx 1.5

[@RBTheMechanic]

@@sherm848 I will check once I get back to work

[@santanakapone]

💪🏾💪🏾💪🏾

[@edwinbarahona4486]

Thanks. For the video. 😂

[@RBTheMechanic]

Welcome

[@malcolmjelani3588]

You're like the new Scotty Kilmer

[@RBTheMechanic]

Yeah thanks bro I do fully detailed video!!

[@docholliday2961]

👍

[@gameonae6620]

Where’s the front

[@RBTheMechanic]

Search it type in front brakes accord rb the mechanic

[@boss_of_da_dead4189]

Bro where is the torque wrench at? 😳😳 you give us a bad name

[@RBTheMechanic]

Nope! Good name! Keep it real

[@boss_of_da_dead4189]

@@RBTheMechanic hahaha I guess your hands can measure that… Caliper bracket: 80f lbs Caliper slide pins: 18f lbs Where is your torque wrench yes bro you give us mechanics a bad name mechanics like you is why you see tires flying on the highway good job showing the rest of KZbin to be dumb mechanics

[@Je559_]

​@RBTheMechanic you can feel the torque.

[@iishyxvietxboyii1]

2018-2022.

[@Je559_]

Ora 10 thousand Dolla Scan tool😂

[@RBTheMechanic]

Yeah