How to Replace Rear Struts on a 2012-2017 Toyota Camry (Full Step by Step Process) + Sway Bar change

How to replace 2012 Toyota Camry Rear Struts (+front). + Sway Bars. Full Steps and parts needed.
Parts:
KYB SR4259 - Front Right; L Model; LE Model; XLE Model - www.rockauto.com/en/moreinfo....
KYB SR4260 - Front Left; L Model; LE Model; XLE Model - www.rockauto.com/en/moreinfo....
KYB SR4258 - Rear Left; L Model; LE Model; XLE Model - www.rockauto.com/en/moreinfo....
KYB SR4257 - Rear Right; L Model; LE Model; XLE Model - www.rockauto.com/en/moreinfo....
Rear Sway bar: DELPHI TC1518 www.rockauto.com/en/moreinfo....
How to change the sway bar: • How to Replace Rear Sw...
Support & Contact:
Help me fuel more content, buy me a coffee? : www.buymeacoffee.com/howtowit...
Venmo: @lechko
PayPay: [e-mail]
CashApp: $LechK
KZbin(subsribe) - / @howtowithlech
Instagram:
@lkforge - / lkforge
@howtowithlech - / howtowithlech
@hikepro_llc - hikepro_llc...
TikTok: @howtowithlech - / howtowithlech
Email: [e-mail]
(Etsy: www.etsy.com/shop/LKforge )
Thank you for all your support. More content is on the way! Any suggestions send them my way.
Please no spam or scammers...

[@danielmedina9660]

Great video man most honest and well explained with details

[@HowToWithLech]

Thanks 👊

[@amazighm]

Great job 👏 thanks for your video

[@HowToWithLech]

👍👊

[@salwansalem8099]

Great job God bless

[@HowToWithLech]

👍👊

[@talhaasif8473]

Great video! Which drill did u use to remove the 2 shock bolts?

[@HowToWithLech]

Impact. Need some power for that. Or breaker bar

[@user-bq2co6lh3x]

dude, quick tip, better to stand on the other rotation and push down on the breaker bar to tighten the nuts instead of lifting, 26:05. That will mess your back in the long run. But yeah, great video, appreciate for the sharing.

[@HowToWithLech]

Thanks 👊

[@jims2507]

How are the KYB struts on your camry now that you replaced them? My friend installed KYB on the rear of my very old Camry, it was firmer than before, but OK. Then I had a shop install KYB on the front, but the ride feels jittery, way too stiff for my liking.

[@HowToWithLech]

Sorry far we like it. Just needed to get them done, wasn’t looking for performance. But it feels pretty standard.

[@chris360s_]

this is why its best to go with OEM. I changed my front struts and went with oem KYB struts, not the whole assembly, just the strut itself. I've read numerious times that using quick struts are no good.

[@AM-nk7it]

You're replacing the bar link and shock. Why bother with the stuck top screw??? Loose the bottom screw and take the strut with the bar link out!!! What a waste of time!!!

[@HowToWithLech]

completely agree. but wanted to show it removed, if someone is reusing etc.

[@DanielDaniel1]

Hex has no place in any high torque applications. Bunch of BS

[@HowToWithLech]

Just going by specs. Try to get close to it. That’s all