How To Replace Starter 2009-2020 Dodge Journey

Buy Now!
New Starter from 1AAuto.com 1aau.to/ia/1AEST00527
The starter is a powerful electric motor that gets your engine to turn over when you turn the key in the ignition switch. If a motor has worn out or become damaged, your vehicle won’t start. This video shows you how to install a new starter on your 2009-2020 Dodge Journey.
This process should be similar on the following vehicles:
2009 Dodge Journey
2010 Dodge Journey
2011 Dodge Journey
2012 Dodge Journey
2013 Dodge Journey
2014 Dodge Journey
2015 Dodge Journey
2016 Dodge Journey
2017 Dodge Journey
2018 Dodge Journey
2019 Dodge Journey
2020 Dodge Journey
Tools you will need:
• 14mm Wrench 1aau.to/oF/1AXAA00010
• 14mm Socket 1aau.to/oaE/1AXAA00015
• 15mm Socket 1aau.to/oaE/1AXAA00015
• 16mm Socket 1aau.to/oaE/1AXAA00015
• 18mm Socket 1aau.to/oY/1AXAA00043
• Floor Jack 1aau.to/oN/1AXAA00068
Subscribe: / @trq
Check out our playlist:
Dodge Journey 2009-2020 1st Generation: • Dodge Journey 2009-202...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@Rightwingcommentremoved]

Jesus christ, who designed this pos i replaced the battery in one of these the transmission probably needs removed when changing the air filter

[@Godsgiftedkemira]

Thank you so much for your professionalism and detailed video! Literally saved my life along with my amazing mobile mechanic! God Blesss ❤

[@sulla9528]

Please mention if this is for 2.4 L engines or for V6 engines? Thanks

[@griffin36bg]

Great video.. I was gonna have a shop do it, but I think I can manage doing it at home

[@sln2112]

Thanks for the information GOD BLESS YOU 👍🏻

[@johnspinasanto1638]

Great explanation and quality video

[@LucianoMartinez-cc2ld]

Great video 👍

[@dynamic_4064]

For anyone wondering what engine this is, it’s the 3.5L V6. This is a 2009-2010 Journey. They were the only ones to come with the 3.5. The 3.6 is different from the 3.5s removal process.

[@Billionwatts]

Thank you so much, you made my job a whole lot easier!

[@andrewbentley1136]

Great video but no plug on starter or ground wire on 3.6 engine and no spacer and only 2 bolts on starter with alignment pin. Maybe this is 2020 or 2.4 engine? Most like 2014 3.6 just have single wire to a spade and main power on 13mm. And no reason to remove O2. Thats just asking for trouble IMO. Whenever I remove an O2 sensor I do it on hot engine but im sure not all are difficult, just seen too may people mess them up. A sheared O2 sensor is not fun.

[@stevewhite9905]

I but a starter in the car starter up now I can't get it to turn off

[@user-gw1pe8wk1o]

i watched the clip and took my husband 4 hours to complete the work. he said it was tight in one area and after that it was smooth sailing putting back together

[@TruckingWithKimlo]

Did u have to move the exhaust I can’t get starter to fall

[@juancamberosg.593]

How come you don’t start by introducing yourself Lenny? What’s the difference with TRQ and 1aauto?

[@stephroll9708]

3.6L ? 2.4L . Kind of detail that would be important because totally different

[@mikebonar3702]

Or a 3.5 09 10 had them

[@user-zf6zf8rb6f]

Merci beaucoup

[@carlosazahar7385]

What is the approximate labor cost for this job?

[@LAllen-hg4ce]

You made that look too easy lol😂😂😂good job

[@joemillionaire6470]

Where are you located

[@jasonsmith4243]

Looks like a 3.6l v6

[@blazintayzingaming2600]

It's crazy how many people are asking for the engine specs and buddy has yet to respond. To avoid this confusion, one would think you'd just state that in the introduction 🤦🏾‍♂️

[@rc1145]

Removing the sensor seemed really unnecessary to me. I would’ve personally tried starting the car before I put it all back together completely. At least then if something was wrong you wouldn’t have to go back and take it all apart again. Other than that it was a good and informative video.

[@alexmorgan9079]

I think he did it fast?

[@McAwesomePants69]

I'm not in love with the fact that it's all jumpcuts from spot to spot, I'm inexperienced at working on cars and this is very confusing