HOW TO REPLACE TAPERED SEMI-INTEGRATED HEADSET IN YOUR MTB BIKE |

[@lonerbikes]

HEADSET SIZES Dane techniczne: Górna średnica rury sterowej widelca: 1-1/8” (28,6 mm) Średnica wewnętrzna góry główki ramy: 44 mm Średnica wewnętrzna dołu główki ramy: 56 mm Średnica widelca w miejscu nabijania dolnej bieżni łożysk: 39,8 mm

[@camilocabrera204]

Good video and great info about the sizes. Thank you man!!!

[@rolesk8video971]

Meu quadro é soul sl329 essa caixa de direção pega nele?

[@jammerlr7780]

Doing both bearing races at the same time is a very bad idea. By doing one at a time, you are able to keep the other end referenced square to the head tube. Doing both drastically increases the chances of them not being straight and square.

[@flux_core_fx]

If they aren't square that would suggest the frame isn't either

[@joren7653]

Thanks! Which diameter rings did you use to press in the bearing cups?

[@flux_core_fx]

Thank you!

[@lonerbikes]

@@flux_core_fx enjoy bro 😎

[@england1818]

Hi what grease did you use?

[@dr.quacktv284]

cannondale cujo 2?

[@lonerbikes]

no idea

[@stevekyhon]

Do you need to install a new crown race on the fork?

[@simonr23]

ideally. usually the kit (or bottom bearing kit) will include a new crown race. you could use the old one if it is still flat and smooth and mates up to the new bearing/seal.

[@francisatta5590]

CAN THE OLD HEADSET BE USED WHEN FIXING A NEW DIFFERENT FORK( MOUNTAIN BIKE SCHWINN AL COMP)

[@alf3071]

can't you just replace the bearings without needing to press those new bearing holders?

[@lonerbikes]

Yes, you can replace only bearings, but this video will show you how to montage full setup 😉

[@Full_Throttle_no_Brakes]

Please share the link to buy this kit in Poland. Thanks

[@lonerbikes]

Neco headset?

[@lonerbikes]

allegro.pl/oferta/stery-polzintegrowane-tapered-maszynowe-neco-h383-11619942490

[@Full_Throttle_no_Brakes]

@@lonerbikes thank you

[@alecliao7581]

What size is that headset

[@lonerbikes]

You have pinned commen….

[@dasbabu7261]

Can you tell me one park tool grease or any grease that I can use to assemble a bike and can apply everywhere

[@dominikbator8585]

Try Decathlon red grease.

[@Catson91]

what about that part of metal which i have on the fork

[@vittocrazi]

you need to remove it too. its part of the headset and may not be compatible with the new one

[@jyotihacker9224]

Buying link ?!

[@brianpaulalbania5496]

What size the headseat ? 55mm or 52mm

[@lonerbikes]

Check link in description,

[@antimasingh178]

How can we know our mtb's headset size please tell me

[@lonerbikes]

Visual check and measurement with caliper 😏

[@vittocrazi]

measure the inside of the openings of the frame withe the headset completely removed

[@EletronicaCatia]

perfeito top. top.

[@Oldbikerestorations]

Very helpfull. Thx

[@lonerbikes]

😉

[@secretcontroller1904]

Thank u

[@vaigamin9999]

HEADSET

[@JohnGiron05]

hope you could have proper tools

[@lonerbikes]

What exactly ?