How To Replace The Belt On A 1970's Pioneer Turntable

[@joel.6398]

I have an original PL 12d, love this turntable. Great video. Thank you

[@emiliodetorre1723]

Thank you so much! Great detail and good camera work illustrating what I need to do!

[@ltdees2362]

Hey thanks! Just got a Pioneer PL-15R from Ebay and just wanted to make sure before I screw something up doing something stupid...👍...my platter looked just like yours! BTW, I used Novus plastic polish and got all the scratches out of the dust cover...looks brand-new!

[@JohnSilver-m6e]

I have a PL-90 Pioneer turntable that needs a belt replacement. I have the belt. I cannot remove the metal turntable. Also there is no hole on the edge where you run it through the pulley that moves the belt. There are 4 holes in the middle of the turntable. It will move up slightly but it won't come off. 8:05 Can anyone give me the solution.

[@davidryan6441]

Otto, Many Thanks for posting this vid....Finally got my Pl112d up and running. This was a Great help. Thanks Again

[@theeurobandit]

I'm glad it helped you! Cheers!

[@januschristus]

Thank you very much! You saved my evening! ;D Best regards from Switzerland

[@Trebicyem]

Thanks for your vid, it really help me change my belt on my old family turntable

[@oscoe]

Hey Otto, can you help? I have exact same model pl-510a...BUT my platter only has 2 small inner holes NOT elongated holes for placement of belt.!?? What can I do????

[@ltdees2362]

...sounds like you have the wrong platter...

[@peterderidder9922]

Thank you, now I can make it myself.... Good word my friend

[@asmrkaviano6928]

I just got a PL-512 with new belt, but the 2 speed doesn't change when I toggle the switch... Maybe I need to change the belt again but the guy said it's a new belt.

[@stancowan479]

Thats all fine but does anybody know about the pioneer pl-50belt install

[@andyreynolds6194]

Thank you for this - really helpful 👍👌

[@yvanpbolduc]

Très bon conseil nettoyé la table tournante reste a trouver une courroie de la bonne dimension. Many thanks...

[@kboel1]

Thanks a lot esp for the trick with the WD40!

[@XY4X]

Thanks a lot, this was super helpful

[@insolentstickleback3266]

Thank You, I have the PL-50, have my new belts, will be doing this soon. And yes mine is stuck. 😁

[@kanishkafernando4913]

Hi I have a pioneer pl-a300 turntable I replaced the belt but it wont work correctly. When I select the 33 speed I cannot get the correct speed the speed is less than 33rpm If you can please help me

[@BionicMerlin]

Try turning it by hand with the belt off or just turn the spindle with the platter off. If it's hard to turn/feels gritty the spindle may need replaced.

[@Smokdeel]

Thank you very much for that 🖐🏻🤠🎼

[@dougdalgetty7521]

Thanks for this.

[@bish799]

Just what i needed. I have exactly the same player (-:

[@avehein]

Very helpful. Thank you so much! Thumbs up!

[@notrondayt9]

Thankyou very helpfull

[@PUNEKID]

Good