How to Replace the Front Fuel Filter on a 2020 6.7L Cummins Diesel

In this video I will show how I replace the front fuel filter in a 2020 Ram 3500 6.7L Diesel.
Check out the rear filter replacement video here
• How to Replace the Rea...

[@codygreer9945]

The best video so far on 5th gen fuel filter change for Ram, thanks very helpful.

[@funbro1]

Glad it helped

[@_Darrell_]

just purchased a 2020 3500 a dealership and will be replacing all filters, including oil. thank you for the video. a great help. and no, i don't trust the dealerships to do a complete replacement of oil and filters when selling used vehicles.

[@funbro1]

Great to hear! Thanks for watching.

[@vernschultz7664]

I agree, not to trust dealerships. Unless you have been doing business with them for a long time. For what it cost it's cheap insurance . This way, you know they're done.

[@billstobie4872]

@@vernschultz7664 hopefully

[@roscoejennings4519]

The best video I’ve seen on this project. Thank you!

[@funbro1]

Thanks for watching, glad you liked it.

[@all5005]

Super helpful. Finished my first front / rear change yesterday and it was easy with your walk through!

[@funbro1]

Glad it helped!

[@Joe-rr1bf]

Thank you bob really appreciate your videos hope you keep them coming specially on the Cummins God bless

[@funbro1]

I’ll keep them coming, thanks for watching.

[@NickSpencer-c4j]

Who are you!? These are the best videos!

[@alf732]

I just did my 2020 Front & Rear, very accurate video for my rig. But why did the put the rear canister over the drive shaft???

[@tuckerjeffrey]

Thanks Bob, this is the best video I’ve found on changing the top fuel filter on KZbin. They wanted 420.00 to change the 2 filters. Stealerships for sure. Do you have a Mopar or Fleetguard part number by chance or where do you source your filters at? Thanks much sir.

[@funbro1]

I used OEM parts 68157291AA and 68436631AA for the fuel filters. Usually do an internet search to find the best price when I am able to plan ahead. Hope this helps, thanks for watching.

[@martesmywhat1920]

1+ subscriber here Dallas tx. THANKS Y'ALL.. July 2022

[@funbro1]

Thanks for the sub and thanks for watching.

[@vareckwalla4143]

I followed your instructions on the rear filter and it worked great. Much more room there. I tried the front filter but apparently Andre the Giant screwed the cap on. With limited room I was unable to budge it at all :( Looks like I'll have to take it into a shop to do it. Poor design IMHO by Ram in the front. Thanks!

[@funbro1]

Yeah, it’s not that easy to get to. Thanks for watching.

[@northcounty8996]

Is the front one reversed threads? I see you righty loosie turning the front filter cap.

[@ffdavid7934]

How did you fit your hands in there without using an extension? I can’t get any leverage it feels liek

[@DipStix666]

Nice Video…..would you recommend doing the prime step after changing each filter or after doing both? Or don’t you think it would really matter either way? Thanks

[@funbro1]

Yes, I would do it after each change. It doesn’t hurt. Thanks for watching.

[@barbaralewis2631]

Awesome video thank u bud !

[@funbro1]

Thanks for watching.

[@floydwilliams3321]

Good information

[@earlgrad5290]

Bob, do you know or think the same instructions apply to a 2021 Ram 2500? Great video, like that you are specific on what hoses and socket you used, watched both the front and rear filter videos.

[@funbro1]

Well I’m not 100% sure, I do believe they should be very close to the same if not exactly. Thanks for watching.

[@dmtycn]

2:18 the design of front and rear one should improve, no matter how you drain it, when you take off the cap, always spill out some fuel.

[@funbro1]

I agree, there is much that can be improved in this area. Thanks for watching

[@northcounty8996]

Bob, Whats the part number for this front filter... I ordered one and got the entire housing without a filter inside....

[@funbro1]

Do you have the High output?

[@funbro1]

In this video it was part number MO-291.

[@keithromersenior155]

Filter seems stuck i push in but in dosnt appear to move i turn and turn and pull and pull but it will not lift out.

[@funbro1]

It does “click” into place but it should lift out pretty easily. I’m not sure why it would not come out?

[@xarkzy_6751]

My front housing is stripped and stuck any ideas

[@andrewbrand7869]

Great video! 👍🏼

[@funbro1]

Thanks for watching.

[@on4acres]

Do you have a part number on this?

[@funbro1]

Yes, it’s listed in previous comments. Thanks for watching.

[@stacksfargogmrichbullies139]

Is it ok to just change the front? Isn’t there a back filter also?

[@funbro1]

Yea there is a back filter as well, I would recommend changing both at the same time. Here is a link for changing the back filter. Thanks for watching. How to Replace the Rear Fuel Filter on a 2020 6.7L Cummins Diesel. kzbin.info/www/bejne/jV68qXmiqpp1j7s

[@ToneeBologna.]

Can you use silicone lube for the O-rings or is diesel sufficient ?

[@funbro1]

I would stick with fuel since it’s easily available. But silicone grease coils work. Thanks for watching.

[@_WELDR_]

Nice video , but that was probably $40 in fuel in that bottle 😂🤣😂🤣

[@funbro1]

When the video was made it was probably only $20 in fuel but since the “stealership” charges $400ish for a job like this I still saved money. Thanks for watching.

[@dakotashipman7355]

lol idk how you got your arm down there to open drain valve. Burnt myself trying 😂

[@chrismartin4335]

The dealership seems to charge pretty high for the filters do you know where I might be able to get them a little cheaper? Maybe Online? You recommend anyone in particular? Thanks again Bob

[@funbro1]

Not anyone place, just did an internet search and found the cheapest available. Thanks for watching.

[@chrismartin4335]

@@funbro1 ???

[@funbro1]

????

[@chrismartin4335]

@@funbro1 I was asking if you know of a place to buy the filters for a better price than going directly through dodge. Sorry if I wasn't clear.

[@funbro1]

Internet

[@chrismartin4335]

You should be a teacher appreciate you

[@funbro1]

Thanks, I appreciate you watching.

[@NickSpencer-c4j]

Confirm this comes off lefty loosey? That cap is on there super tight. I’ve tried everything. 2020 2500 6.7 Great video otherwise.

[@funbro1]

As shown in the video, lefty loosely. It can be a pain to remove, that is for sure. Thanks for watching.

[@robertyearian227]

Good video bud