How to replace the front shock absorbers and struts C4 mk1 ➿

BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈
📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱
⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎
🛠📏⚙ FIND ALL THE PARTS AND TOOLS NEEDED AND RECOMMENDED BY USETOOL EN ⚙📏🛠
Parts you will need :
- Suspension strut support bearing : bit.ly/suspensionstrutsbole12...
- Shock absorbers : bit.ly/frontshockabsorberbole... and
bit.ly/frontshockabsorberbole...
- Penetrating oil
- Spring : bit.ly/coilspringbolf011010en
- Copper grease : bit.ly/coppergreaseen
Discover a vast array of services that will help you run the maintenance of your car: vehicle user manuals, maintenance planning and mechanics-oriented tutorials!
Replacing the front shock absorbers and struts on a Citroen C4.
Discover the world of UseTool EN on www.usetool.io
Needed tools
- 💣🤖🏆 The complete toolbox recommended by UseTool EN to repair your C4 : maclede12.co/toolboxCLASOS3050en 🏆🤖💣
- Torx T30 socket
- 21mm Spanner
- 19mm Offset wrench
- Torx T20 socket
- 6mm Allen key
- 16mm Spanner
- 18mm Spanner
- Socket wrench
- Flat head screwdriver
- Torque wrench : maclede12.co/torquewrenchCLAS... or maclede12.co/torquewrenchCLAS... or maclede12.co/torquewrenchCLAS...
- 18mm Socket
- Adhesive tape
- Spring compressor : maclede12.co/springcompressor... : maclede12.co/springcompressor... or maclede12.co/springcompressor...
- Shock absorber head removal kit : maclede12.co/shockabsorberhea...
🔝💪 Safely lift your C4 with the hydraulic jack: maclede12.co/jackCLASOH5304en and axle stands: maclede12.co/standsCLASOM3030en recommended by UseTool EN 💪🔝
- Hydraulic jack
- Wooden peg
- Axle stand
- Wheel lug wrench
🚗📢💡 RESSOURCES 💡📢🚗
Usetool's warnings
We advise never replacing just one shock absorber, to make sure you drive we the most balanced vehicle possible.
Be careful during the spring compression stage, it may be risky and requires careful attention. Fix the tool in a vice, this will make it easier to use.
Usetool's infos
During this operation, you will work on the steering system of your car.
When you change the shock absorbers in your vehicle, you should carry out a tyre alignment.
📽❤️🚨 USEFUL VIDEOS 🚨❤️📽
- [ USETOOL'S TIPS & TRICKS ] Lifting your vehicle safely : • How to (PROPERLY) lift...
- [ USETOOL'S TIPS & TRICKS ] Removing and reinstalling a wheel : bit.ly/2hchmbB
Space Race by tubebackr | / tubebackr
Music promoted by www.free-stock-music.com
Terms and conditions of the offer : www.mister-auto.co.uk/operati...
Disclaimer: This video was created for information purposes and does not guarantee the outcome of actions undertaken.
To ensure that you see the best results, we recommend getting in contact with qualified technicians who will carry out the installation.
This video provides tips and recommendations that can be useful when repairing or changing parts. MCD12 and its partners cannot be held responsible for any physical and material damage that comes from the poor installation or incorrect interpretation of the video content.
This video was created for information purposes and does not guarantee any outcomes. The user is solely responsible for the incorrect use of repair machines, tools and parts, in particular if these may cause physical damage. MCD12 and its partners recommend taking great care and carefully following the safety rules when carrying out the repair or replacement of any parts. Please keep in mind that using poor quality parts compromises the safety of the driver when on the road.
0:00 Intro
0:11 Remove the shock absorber
4:59 Set the new shock absorber up
8:19 Replace the shock absorber

[@UseTool_EN]

BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈 📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱 ⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎

[@tstuart7333]

Great little video, Thank you.

[@nigelmitchell351]

No mention of the relatively between each end of the spring, note axis of spring is not the same as the damper. The top spring location is not symmetrical. Check if your replacement spring has exactly the same number of coils as your original, if it's broken or lost, it should have just less than 5 & a half turns or coils ! Very important or you will replacing the top bearing in short order !

[@tibifenyvessy4310]

nice video... t starts with a Citroen C4 and ends with a Peugeot 307 ..... same platform but in assembly/disassembly other .....

[@lonelymtbrider3369]

Nice video, thanks. But no need to pump the shock absorber by hand before assembling it. That's just... unnecessary.