How to replace the rear shock absorbers C4 mk1 ➿

BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈
📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱
⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎
🛠📏⚙ FIND ALL THE PARTS AND TOOLS NEEDED AND RECOMMENDED BY USETOOL EN ⚙📏🛠
Parts you will need :
- Shock absorbers : bit.ly/shockabsorberbolb031855EN
- Penetrating oil : maclede12.co/Penetratingoilen
Discover a vast array of services that will help you run the maintenance of your car: vehicle user manuals, maintenance planning and mechanics-oriented tutorials!
Replacing the rear shock absorbers on a C4 1.
Discover the world of UseTool EN on www.usetool.io
Needed tools
- 💣🤖🏆 The complete toolbox recommended by UseTool EN to repair your C4 : maclede12.co/toolboxCLASOS3050en 🏆🤖💣
- 17mm Socket
- 16mm Spanner
- Socket wrench
- Torque wrench : maclede12.co/torquewrenchCLAS... or maclede12.co/torquewrenchCLAS... or maclede12.co/torquewrenchCLAS...
- 13mm Spanner
- Extender
🔝💪 Safely lift your C4 with the hydraulic jack: maclede12.co/jackCLASOH5304en and axle stands: maclede12.co/standsCLASOM3030en recommended by UseTool EN 💪🔝
- Hydraulic jack
- Wooden peg
- Axle stand
- Wheel lug wrench
🚗📢💡 RESSOURCES 💡📢🚗
Usetool's warnings
We advise never replacing just one shock absorber, to make sure you drive we the most balanced vehicle possible.
The use of a jack to counter balance the pressure of the shock absorber spring is strongly advise, as explained in the tutorial.
Usetool's infos
No particular piece of information necessary to carry out this operation
📽❤️🚨 USEFUL VIDEOS 🚨❤️📽
- [ USETOOL'S TIPS & TRICKS ] Lifting your vehicle safely : • How to (PROPERLY) lift...
- [ USETOOL'S TIPS & TRICKS ] Removing and reinstalling a wheel : bit.ly/2hchmbB
Space Race by tubebackr | / tubebackr
Music promoted by www.free-stock-music.com
Terms and conditions of the offer : www.mister-auto.co.uk/operati...
Disclaimer: This video was created for information purposes and does not guarantee the outcome of actions undertaken.
To ensure that you see the best results, we recommend getting in contact with qualified technicians who will carry out the installation.
This video provides tips and recommendations that can be useful when repairing or changing parts. MCD12 and its partners cannot be held responsible for any physical and material damage that comes from the poor installation or incorrect interpretation of the video content.
This video was created for information purposes and does not guarantee any outcomes. The user is solely responsible for the incorrect use of repair machines, tools and parts, in particular if these may cause physical damage. MCD12 and its partners recommend taking great care and carefully following the safety rules when carrying out the repair or replacement of any parts. Please keep in mind that using poor quality parts compromises the safety of the driver when on the road.
0:00 Intro
0:11 Remove the shock absorber
2:00 Replace the shock absorber

[@UseTool_EN]

BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈 📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱 ⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎

[@danpaun8269]

Nice video. I don't agree though the new shock being squeezed in the vice with no protection ( at least some pieces of wood or rubber). Question: the two pieces you added to protect the tube, are coming with the new shock?

[@kevnixon5141]

Nice video very informative, I’ve got a mk2 Citroen c4 and when I was removing the toe bar that came with it I noticed after I’d jacked my car up that both rear wheels were bearly lifted off the ground and I mean I probably couldn’t get my fingers under the bottom of the tire. yet the jack was at max height and the axel stands that went under to support the car where on the first hole (notch) is this a sign there defective (the rear shocks) or am I worrying over nothing any help or a dive would be greatly appreciated.

[@saudade2745]

I just got my shocks but am concerned, they compress with little to no effort and have to be decompressed manually. Is this normal on none gas shocks? Surely should be somewhat difficult to compress