Do not use a metal pry tool to lift the motherboard.
@g-ro44493 жыл бұрын
Really helpful bro, thanks.
@JaiHo777V Жыл бұрын
Helpful.. thanks 👍
@mariapalacios75164 жыл бұрын
Awesome 👍
@douglasflores14622 жыл бұрын
Hi, do you have a guide to replace just the screen, while using the same frame? Thanks in advance.
@anothereditingchannel21643 жыл бұрын
He didn't take off the plastic at the end. That bothers me
@edwinbab32052 жыл бұрын
CN I use hair dryer to heat up I want remo e glass only and then sgL u wa till cools down. Then remove the vkass
@photondebuger452 жыл бұрын
Awww you actually redo the steps if you forget to a step prior like when you forgot the sim tray
@tbpc8003 жыл бұрын
I would love to know where you purchased your materials. Especially the double sided tape and the magnetized screw drivers you used. The iSesame tool seemed very useful as well. Please post where these items can be purchased.Thank you
@iSmart12 жыл бұрын
on eBay.com
@photondebuger452 жыл бұрын
Oh yeah i hope you do remember or if you're able to answer because i know this video was posted a year ago but is the g7 supra the same as the power?
@douglasflores14622 жыл бұрын
Yes, it is. Cricket calls it Supra. I have put cricket motherboard in tmobile screen. Any parts are interchangeable between them.
@pattskatoey3139 Жыл бұрын
You don’t need to take the motherboard out to replace the screen.
@misakiluv4 жыл бұрын
Wish me luck, gonna try to fix my brother phone.
@jennt90122 жыл бұрын
Can you use a screen and motherboard from another phone that’s the exact same?
@edwinbab7052 жыл бұрын
I use uv loca glue it does not hold what glue I use
@wellybanks48134 жыл бұрын
Hi what size double side tape did u use please?????
@alidaestrada31233 жыл бұрын
Where do you get at
@coltonlynn93663 жыл бұрын
I was wondering why the power button is not working after digitizer installation any suggestions thx
@coltonlynn93663 жыл бұрын
Also the fingerprint ribbon broke but power button was still working just fine on the old digitizer. Would the power button work if I bought a new finger print ribbon cable?
@douglasflores14622 жыл бұрын
Maybe you forgot to connect back the battery connector to motherboard. Phone can work perfectly without fingerprint reader.
@edwinbab7052 жыл бұрын
Is it easy just change the glass layer?
@iSmart12 жыл бұрын
no, it's not easy.
@edwinbab7052 жыл бұрын
@@iSmart1 I guess I buy the whole layer
@iSmart12 жыл бұрын
yes, you'll need the full assembly, lcd+digitizer+frame if possible
@17valleyforge763 жыл бұрын
So I replaced the. Glass and now the talk into speaker doesn't work any idea why?
@iSmart13 жыл бұрын
Sometimes there's a plastic piece covering the place where top microphone is placed, make sure the tiny hole in the microphone and the one to the outside is clearly open.
@17valleyforge763 жыл бұрын
@@iSmart1 what about the one on the bottom on the charge port board
@KlusterFux3 жыл бұрын
You're replacing the whole phone, not just the LCD screen.
@jennt90122 жыл бұрын
Can you use a screen and motherboard from another phone that’s the exact same?