HOW TO REPLACE THE STRUT RUBBER MOUNT BUSHINGS | WIGGLING STEERING AND BRAKE SOUNDS | TOYOTA VIOS

The strut bushings are designed to keep the suspension components tightly bound together to restrict movement and better stabilize the vehicle. When the bushings become worn, there is more room for the parts to move around, which can create rattling or shaking noises.
#StrutBushingReplacement
#ClankingNoise
#JawreyCarDiyTv
#LetUsLearnTogether
****DIAGNOSTICS & DIY VIDEOS****
FULL SUSPENSION DIAGNOSTIC GUIDES
• KALAMPAG, LAGUTOK AT L...
WHEEL BEARING
Diagnostic: • HUMMING SOUNDS? HOW TO...
DIY (Avanza): • HOW TO REPLACE THE WHE...
TIE ROD (Inner/Outer)
Diagnostic: • TIE RODS: INNER & OUTE...
DIY: • HOW TO REPLACE THE OUT...
STABILIZER LINK & SWAY BAR
Diagnostic: • STABILIZER LINK AND BA...
DIY: • HOW TO REPLACE THE STA...
BALL JOINT & SUSPENSION ARM BUSHINGS
Diagnostic: • BALL JOINT & SUSPENSIO...
DIY:
FRONT SHOCK ABSORBER
Diagnostic: • FRONT SHOCK ABSORBER -...
DIY: • HOW TO REPLACE THE FRO...
REAR SHOCKS ABSORBER
Diagnostic:
DIY:
STRUT RUBBER MOUNTING
Diagnostic: • STRUT RUBBER MOUNT - H...
DIY: • HOW TO REPLACE THE STR...
COIL SPRING
Diagnostic: • COIL SPRING - How To D...
DIY: • HOW TO REPLACE THE COI...
RACK & PINION
Diagnostic: • RACK AND PINION - How ...
DIY:
OUTER CV JOINT
Diagnostic: • INNER & OUTER CV JOINT...
DIY: • LAGUTOK / CLUNKING SOU...
WHEEL ALIGNMENT
Diagnostic: • WHAT IS WHEEL ALIGNMEN...
DIY: • PAANO MAG MANUAL ALIGN...
*********
Follow us on our other social media accounts:
FACEBOOK
Jawrey Car DIY
/ jawreytv
KZbin
Jawrey Car DIY
/ jawreytv
Mynes Tv
/ @mynestv6853
Twitter
Ja...
Thank you

[@carygctv2533]

Nice work lodi

[@RustyDiyGarage]

Thanks 😁

[@ricobalbarino4206]

Town.. complete na

[@arjohnbautista9727]

Okay ba ferpormance Ng replacement sir

[@RustyDiyGarage]

Oks naman sir basta yung magandang klase at tama ang pagkakabit. KYB gamit ko

[@absmher5860]

bakit ang vios ko walang ganyan na stabilizer link na pataas? 2016 model

[@RustyDiyGarage]

Ibang model sayo boss. Batman at robin yan eh. Yung superman and paraas maiksi na yung stab link nya...

[@mohammadrafiq3117]

👍👍👍👍👍👍👍👍👍👍👍👍👍

[@migzflores3091]

Sir anung gen na vios ito? At anung model?

[@RustyDiyGarage]

Batman po yan kaya dont forget to subscribe.

[@migzflores3091]

Sir Saan mkabili Ng shock mounting Ng vios J batman 2012 model? At anung porma Ng mounting?

[@RustyDiyGarage]

Sa autoshops sa inyo basta batman meron yan. Pero gusto mo orig banawe ka or online ka KYB ksama bearing maganda yun.

[@byaheromotorista1992]

Paps, pano remejo pagtanggal ng shock absorber bumilog kc butos sa may alenren dun sa may shock mounting.

[@RustyDiyGarage]

Kung may yabe tubo ka sir ipitin mo sa shock sa ilalim. Pero ako ginawa ko grinder pinutol ko yung pinaka ibabaw kasi dun stuck up. Natanggal naman

[@arjohnbautista9727]

Same issue din sakin Bo's ginawa ko vicegrip ko skock SA pinakataas para Di masugatan awa Ng dyos napigil naman

[@migzflores3091]

Anung complete name Nung plate/lock sir at magkanu din? Sira na kc ung isa ko

[@RustyDiyGarage]

Anong plate name or lock

[@migzflores3091]

@@RustyDiyGarage ung sa taas Ng shock mounting

[@isaiahserfino7760]

Wala naba sukat ang pag higpit sa taas

[@RustyDiyGarage]

You mean sukat na torque? Di naman need sir basta higpitan mo lang ang tip lang dun wag mong higpitan habang naka jack pa gulong. Hayaan mo muna na nakaloose. Pagkakababa ng gulong or alis from jacking zk ko higpitan kasi kapag mahigpit na yan ng naka jack pa aangat yan kapag binaba na gulong dahil sa bigat

[@isaiahserfino7760]

So Diretso higpit lang.? Kase pinag compare mopa yung Isang Hindi mopa nakalas kaya naguluhan kami, meaning pag Ali's Ng Jack at naka lapat na Gulong sa lupa dun kana talaga mag higpit Ng Bolt sa taas.?

[@jgorreon]

subrang tigas nung sakin baklasin ang bolt ng may allen.

[@RustyDiyGarage]

Babaran mo muna ng wd40. Kung kinalawang yan talagang matigas. Kapag bumilog na yung lagayan allen need mo na kontrahin yung shock or worst grinder