#chrysler300 #srt8 #throttlebody #diy Throttle body torque 6-8 LBFT. In this video I go over the throttle body replacement procedure on my 06 Chrysler 300 SRT8. Thanks for your support of the channel!!!
Пікірлер: 52
@plutowalking4 жыл бұрын
Thank you for your time. Helped a bunch!!
@pharoahmonk502 жыл бұрын
Great information! Glad I stopped by!
@MrStupidmachine3 жыл бұрын
Thanks for the advice. I have a Chrysler 200 with the exact same issues, and I'm going to use your advice to try to fix my own throttle body issue. Even if it's not the issue, I have subscribed out of appreciation of the advice. This same advice would have cost me a good bit to drag out of a shop.
@MarcSauz5 жыл бұрын
Sweet video, mine should be here any minute. I’ll do this job myself. Thanks for the confidence!
@MattsMotoWoRX5 жыл бұрын
Good luck!!! Hope it all goes smoothly
@Sonee777 Жыл бұрын
I’m excited looks easy peasy ty Matt
@oohhbaylortv32395 жыл бұрын
You are a genius please make more DIY VIDEOS FOR THE CHRYSLER300 COMMUNITY I own a touring 3.7
@juliansdiamonds3 жыл бұрын
Thank you
@anissaburgess2364 Жыл бұрын
Replace Victor‘s coils mass flow air sensor sensors button in front and rear I have Cadillac converter she said It ran fine for a few days but with a rough idle then she explain what you just explained like I didn’t have to redo it every so often Car has been kicking my ass and I think what you just said is it I’m hoping thank you very much
@carldehoney86332 жыл бұрын
I have a 2005 Chrysler 300 3.5 I took it off and cleaned it with throttle body cleaner. But it's still having the same issue. I held it up at one point and could see a little bit of space between the body and the butterfly. Is that normal ? Or should the butterfly be tight against the body ?
@lexxluther51244 ай бұрын
I want to upgrade my TB to a 87mm, do you know if I have to upgrade my headers and cam? I seen a fourm saying it won't make a difference if I don't upgrade the head and cam?
@vladtepish17903 жыл бұрын
Turn key to on position, not engaging starter, press pedal to the floor release.. programmed.
@jcleonardo5384 жыл бұрын
So I went on #JUSTFORJEEPS I ordered a new throttle body for my 09 Jeep SRT8 and replaced it myself literally took me 20 mins and my jeep runs brand new the shifts are smoother and the peddle is touchy again. I could’ve cleaned it but with the age of my jeep I decided just to go with a new one. Problem fixed because of this video and even the mechanics couldn’t see what it was because it had no check engine lights on.
@forgetit711 Жыл бұрын
I live in Sacramento
@theragingcreeper90404 жыл бұрын
Do you have to relearn?
@labbinbreeze28322 жыл бұрын
If you plan on upgrading your throttle body please don’t, I can’t stress this enough. I upgraded mine and it threw a code of a random misfire. I switched back and unfortunately it’s still there I have done everything imaginable to try and fix it but I recently watched another video and it’s possible the clip that connects the throttle body itself broke. Apparently this is a common problem for these vehicles.
@559LILPAW4 жыл бұрын
Hello I have the same scan tool how do I get to the option to learn the throttle body
@jaimealvarez79814 жыл бұрын
Hi. I have the same question
@tammyelliott99523 жыл бұрын
What was that part number
@andrescontreras30375 жыл бұрын
Can the light be throw if it has a dirty air filter
@sambo923 жыл бұрын
No
@erichadden772 жыл бұрын
Would a bad throttle body keep engine from starting at all? I shut mine off to get gas and wouldn't start back up and still wouldn't start when I got it towed home..
@MattsMotoWoRX2 жыл бұрын
No a bad throttle body will just put the car in limp mode
@erichadden772 жыл бұрын
@@MattsMotoWoRX mine is the 300S awd.. it has the push button start..no key.. could it be the computer..even though the lightning bolt and engine light came on?
@1slw06srt82 жыл бұрын
Do you have a video of removing the manifold on 2006 Chrysler 300 srt8 6.1 or if anyone does
@MattsMotoWoRX2 жыл бұрын
I have a header install video but I don’t go into crazy detail on the manifold removal
@MattsMotoWoRX2 жыл бұрын
Installing Corsa Performance headers on 2006 Chrysler 300 SRT8
@michaelcohan79955 жыл бұрын
I went with BBK their price was 400 so i thought it would be good , you think im good?
@MattsMotoWoRX5 жыл бұрын
Michael Cohan I’m actually interested to see what your results are with that throttle body. That was the only one I was considering buying instead of the stock one.
@jcleonardo5384 жыл бұрын
What were you experiencing with the old throttle body
@MattsMotoWoRX4 жыл бұрын
JC Leonardo Chrysler 300 lightning bolt warning kzbin.info/www/bejne/gJaoqaRog6qKrJY
@janellelopez24353 жыл бұрын
Would you be able to tell me which one to order on Amazon? I looked for the part number, but the prices are for $75. I have a 2006 Chrysler 300c
@janellelopez24353 жыл бұрын
I'm not sure which one of them to order
@robertthurman33093 жыл бұрын
Don't like nor need music other than that you are good ....music distracts a lot ....thank you for the help...
@shawnlawrence40669 ай бұрын
Do you have to relearn the throttle body? I have an 08 300 and I just replace the computer Can I relearn new throttle body without a computer like yours?
@MattsMotoWoRX9 ай бұрын
I’ve been told a throttle re learn is not necessary but I’m not sure if thats true.
@rahjajones29005 жыл бұрын
What was that part number?
@MattsMotoWoRX5 жыл бұрын
Rahja Jones Throttle Body P/N-4591847AC
@weswynn13 жыл бұрын
I did the throttle body but still have flashing lightning bolt, what equipment did you have to relearn that? Or should I just take it to the mechanic.
@MattsMotoWoRX3 жыл бұрын
Take it to a mechanic if you want to re-learn it. Did you use a brand new OEM throttle body?
@alex_2_wavy6203 жыл бұрын
@@MattsMotoWoRX did you relean yours?
@juanmendoza22623 жыл бұрын
What scan tool are you using Sir??
@MattsMotoWoRX3 жыл бұрын
Snap-On verus
@ivan23caravantes444 жыл бұрын
Its a fiat part thats why
@dareckhornsby12763 жыл бұрын
Dose anyone no where I can get my throttle body programmed
@MattsMotoWoRX3 жыл бұрын
Any shop that has a decent scan tool should be able to re-learn it
@johnringoo756 Жыл бұрын
Or do it manually..I think something like ignition on, slowly press pedal, slowly release..do a Google search..
@natespins42034 жыл бұрын
Wait do you have to relearn the throttle body with a computer
@MattsMotoWoRX4 жыл бұрын
I have been told that doing a throttle body re learn isn’t always necessary. Does the throttle body you replaced work?
@natespins42034 жыл бұрын
Matt’s MotoWoRX I ended up replacing it and it has a new computer as well 05 300c but still will not accelerate but will go into gear and idle forward or backwards I’m lost ?
@Tigman3964 жыл бұрын
@@natespins4203 Ever get it figured out, having the same issues.
@Mr.J2812 жыл бұрын
I realize that this is an old thread, but now I’m dealing with it. Has anyone determined if you have to have a computer to reprogram the new throttle body?