How to Replace Wiper Motor 07-11 Honda CR-V

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@william21166]

Really like that this technician actually uses the actual names of the different components in this video

[@DragonZach]

So helpful. Just repeated this same process for my 2017 Accord. Saved $400 doing it myself. Thank you so much!!!

[@richardemms7331]

Just one small thing to add. The windscreen motor needs to be plugged in and turned on then allowed to settle to its off position before aligning the linkage to the motor spindle.

[@kenrutherford8554]

Thank you. You saved me hundreds of dollars. The only thing I struggled with was aligning the wipers to start and stop at the correct place but I figured it out thru trial and error.

[@1AAuto]

+Ken Rutherford Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

[@hpsong6034]

Hi Ken, I have the same issue after changing new wiper motor. Could you share how to fix correct place for start and stop? Thanks

[@DjSkipAlexander]

My motor packed up and I had no idea how to replace until I seen this. Thank you so much for the step by step guide

[@1AAuto]

+Skip Alexander Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

[@zmbsoccer]

Thank you! this video was so helpful! just did this on my 2007 Honda.

[@jamieneil8223]

Great content...clear, easy to follow. Brilliant

[@1AAuto]

+Jamie Neil Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

[@KristianHval]

You just saved me like $500. Thank you very much!

[@1AAuto]

+@ModernTao Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

[@DogDoc1991]

That was great. I needed to know how to reposition the arm on the spindle of the motor and you showed me how it lined up. (Although I was replacing the linkage assembly and the one I bought from NAPA does not have corresponding markings but it was easy enough to ballpark it.). Thanks!

[@bilnicmay]

Thanks for the video instructions. They were great! I made a mistake while tighting the bolt to the transmission and must have misaligned it. Once I put everyhthing back together my wipers are not returning to the right position and are slamming back down and stopping in the middle of the windshield. How do I get them back to their original position? Thanks in advance.

[@richardemms7331]

Excellent video. Clear instructions even though I was replacing the motor on a flight hand drive crv

[@1AAuto]

+Richard Emms Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@herrwabbaloo937]

I’ll probably be doing this for my 2007 since the wipers are stopping wherever/whenever they like. Is it this complicated on other vehicles to remove? Or is the CRV “special?” Exellent video.

[@harritishah8202]

Do you have a video for replacing the rear wiper motor?

[@davidngo1950]

Great job.I learn some

[@glendavis1266]

How about a video on rear wiper checkout and if necessary replacement.

[@viktor1583]

Nice video. Great job! Just... torque for the brace attach missed. Support structure should have specific torque

[@trilexfix]

0:50 flipping me the bird

[@lindaclyman1031]

I replaced my linkage assembly and wiper motor and followed all instructions to a tee including parking the motor 2 times before attaching the linkage arm, when I was done the wipers stopped in the up right position on my Honda CR-V. How do I correct this ?

[@ultramegausername]

Thanks

[@Melicoy]

Awesome THANKS

[@1AAuto]

+Melicoy Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@familiamenchumerlos6159]

No es necesario desarmar tanto 😮

[@rickeyanderson5732]

Didn't know that the antenna weir was and the back glass

[@jalianturner7932]

Midas just tried to charge me 650.00 to do this and the motor only 47.00 on Amazon !! Thanks

[@greeneking77]

5:57 What is the purpose of that "brace" metal? I am wanting to take it out then just put the black plastic wiper cowl back without the metal brace since the wiper cowl clips attaches to the windscreen area. It weights 6 pounds and am trying to reduce weight.

[@DogDoc1991]

That metal brace stiffens the front end of the car. Hope you didn't ditch it because that would have been a huge mistake. What on earth are you doing with a CR-V that losing the few pounds of that brace would make any difference?

[@da324]

Reduce weight in a car with less than 200 hp for what?

[@musicman0423]

Do you NEED the small torque wrench?