This video will show you how to reset the maintenance tank unit on your Epson Stylus Pro 4000, 4800, 4880, 7600, 7700, 7800, 7880, 7890, 7900, 9600, 9700, 9800, 9890, 9900, 11880 Part numbers: C12C890191, C12C890501
Пікірлер: 27
@RogersPhotographyGuilford2 жыл бұрын
DO NOT USE THE TANK WITHOUT PADS. Just take either cheap paper towels, women's maxi pads/tampons (could get expensive) and pack the tank with them. I use (cheap) Paper towels, stack them and then fold them tightly to fit into the tank. It's worked for me over 5 years with no problem. If you don't pad the tank and spill that ink it's going to make an absolute mess. I've also just installed the OG drivers to my Windows 11 system and it's working just fine after a deep clean with inkowl cleaning cartridges. I have/had 3 problem nozzles in the photo black but it doesn't show in the final prints unless you really scrutinize. I'm sure after a few more cleanings it will work itself out. I've had the 7600 since it was released and it's a great workhorse!
@kayleereed29543 жыл бұрын
How do you suggest disposing/dumping of the ink in the maintenance tank once there aren’t pads in there anymore?
@ashleykelley83952 жыл бұрын
Use a pack of ladies sanitary pads to absorb the liquid instead of leaving the tank empty.
@Andre-tc1wj2 жыл бұрын
Great video do you have a reset for Epson R1800, I have 2 flashing red lights
@InkOwldotcom2 жыл бұрын
What is the error message you get on your computer when you try to print?
@Andre-tc1wj2 жыл бұрын
@@InkOwldotcom We didn't try to print as the green power light goes out when the red lights start flashing after the startup of the printer.
@universalshirtco.23272 жыл бұрын
Hi I purchased your resetter for 9800 and when i hold it to the ink or the maintanance tank it only goes red then solid red but wont go green or rest
@InkOwldotcom2 жыл бұрын
If this is the case, you should contact us directly at info@inkowl.com , we will be happy to exchange this defective unit.
@ronaldr.fichthorn30274 жыл бұрын
How about the Epson 9000 Stylus Pro? A flawless workhorse that will not go to scrap.
@InkOwldotcom4 жыл бұрын
Unfortunately, we don't have any products for the Epson Stylus Pro 9000.
@goalmind87534 жыл бұрын
Did you ever get your 9600 up and running?
@ronaldr.fichthorn30274 жыл бұрын
@@goalmind8753 My 9000 runs fine. That's never been a problem. The issue is the waste tank(s) will need to be replaced or the 9000 machine fooled into believing the waste tanks are fine....lol. There has to be a solution.
@zauliaa4 жыл бұрын
hi, we have EPSON T5200. do you have chip reset ???
@InkOwldotcom4 жыл бұрын
We don't have any chip reset options for T5200.
@krystalfu45934 жыл бұрын
we can offer you ,more detaills,contact me Krystal : Whatsapp+ 86 18002847197 Skype : Krystal fu+86 180 0284 7179
@warnawarni48967 ай бұрын
Hello.. I have Epson stylus pro 7890 & error display "Maintenance request code 4000. Refer to manual". Anda now I can't install driver. How to fix bro?
@eduardoballester9922 Жыл бұрын
Do you have a resetter for epson p6000?
@InkOwldotcom Жыл бұрын
There are no resetters for the P6000 that will work on North American printers, which is why we do not sell any. There do exist resetters for European and Asian printers.
@rafaeltellezvazquez29692 жыл бұрын
Hello, in my plotter, Epson 7700 Pro, when I reset the chip of the maintenance tank, the display says "Wrong Type". The ressetter has a label with my model. What can happen?
@InkOwldotcom2 жыл бұрын
This must be a defective resetter. If you ordered this resetter from us then please contact us directly to obtain a replacement.
@niteshnagelia82105 жыл бұрын
how to buy chip reset machine
@krystalfu45934 жыл бұрын
we can offer you ,more detaills,contact me Krystal : Whatsapp+ 86 18002847197 Skype : Krystal fu+86 180 0284 7179
@danielomotosho23213 жыл бұрын
hi, i searched inkowl web, i couldn't get maintenance tank resetter for epson stylus pro 4900
@InkOwldotcom3 жыл бұрын
Here is the maintenance tank resetter for Epson 4900: www.inkowl.com/?p=search&q=iep-reset-4900mt
@user-bs3lx2vz2r10 ай бұрын
:( i tried resetting, it goes from red to green, but the printer wont recognize that the tank has been input
@InkOwldotcom10 ай бұрын
It sounds like you may have a faulty resetter. If you bought from us, please contact our tech support directly. If not, you should contact your vendor.