How To Restring A Floyd Rose & Other Locking Tremolos! - (It's Not Actually That Hard!)

[@robtech341]

Great general tips. I learned way back in the 80's Not to cut the ball end off at all. Run the string through the tuning peg to where the ball pulls tight at the hole. Pull the other end just past the string lock screws, cut the string, insert in saddle block, tighten down and tune up. With a power winder it takes 5-10 minutes. It leaves no finger stabbing string ends on the tuning pegs. Nice and clean.

[@jamied4486]

Well thats actually fucking genius

[@metal_helm]

doesn't work. will slip out of saddle blocks.

[@robtech341]

@@metal_helm Not in 30+ years ever.

[@metal_helm]

@@robtech341 do you have an original fly bros? I've got a licensed on, I think? And that could be it

[@robtech341]

@@metal_helm I've had every Floyd from genuine to knock off, works the same.

[@martinclayton7260]

The first time I restrung my RG550, it took me and a friend over 2 and a half hours? Now I change one string at a time. I'd love to own that PRS!

[@Sighdaball]

lol

[@dragongamer4753]

The neck profile is really weird on it. Its a v and it borderline feels like a strandberg but without shifting as you go along the neck. I played it and it does sound great though.

[@naegleriafowleri2230]

you fucked up my one removing all the strings and not putting something under the bridge to hold it

[@HighVybeTribe]

@@naegleriafowleri2230 I've made that mistake before !!

[@HighVybeTribe]

Thats what I figured is a Safer and easier, yes !

[@Maple93Syrup]

First time giving this a go on my own and feeling like a wizard after getting it all in tune in one go. Out of all the videos out there this one is prime time. Big ups!

[@kirkhunter6868]

First time? AND you were successful? Save some for the rest of us, Jesus H. Christ, bro...

[@Alex-sx8uz]

Fantastic - after 35 years I can finally restring a floyd rose - thank you!

[@chris-rb7bm]

lol ) me too

[@mikehynz]

This guy makes changing strings on a Floyd Rose entertaining AF!

[@FriendGaugeShotgun]

just finished my Floyd Rose Courses here at KZbin university!! after you get it balanced, the stability and intonation is epic!! it took a while, but was worth it!!

[@lima1087am]

The simplest explanation I’ve ever seen, feel confident restringing my Jackson now thanks

[@rickylaflour9294]

I know people who have returned guitars because of "how hard it is" to restring a floyd rose. Just restrung my first floyd rose and it wasn't that hard. Took about a hour but my guitar is perfectly setup and will be until I'm ready for new strings. Absolutely love the setup, guitar, and most of all this video.

[@sapphireeyes69420]

how do u intonate it like what is a 12th fret harmonic?

[@darthdurf9611]

As soon as I lay a guitar on a towel and prop the neck, all3 cats are there 🤣🤣

[@TheRealxVincent]

New bed, sick!

[@blitzedST]

I’ve been playing floyd rose guitars since late 80’s and I do the same all strings at once. Agreed it’s not hard just fiddly. Like anything in life it’s easy when you know how. Great tutorial .

[@welern2liv815]

I like to see what differences the YTers and myself have on this topic. This is one of the better vids I've seen. Please do not turn your bridge posts while string/spring tension is pushing against them. By turning with tension there's a risk of waring/grinding the knife edge fulcrum point causing tuning instabilities. Not to say this will be your experience. I share this from personally having turned my action up & down anytime I felt like changing it and then noticed a flat spot or dead zone. If I push down and release it would go flat. Pull up and it goes sharp and stays until you push bar down, tap it, or bend a string pulling it back to resting flat. Also the bar won't flutter, warble or vibrate since the fine sensitive knife edge has worn away. I suggest leave the strings locked in and remove the springs so there's no tension against the posts. Quarter or half turn posts, reassemble and check action. Repeat if necessary. Love the two camps of "ball end though the tuning peg" and "throw it in the trash", lol!

[@Grung20]

Every single video this man has made has been the most useful information I’ve ever heard. THANK YOU

[@333Raban]

Your Picture looks like red hair woman with glasses

[@muzerino]

Great video. Followed it precisely. It just made me confident to restring my first double locking bridge over and over which I’ve always avoided buying them for the whole setup and restring headache. 👍

[@battalionproductions9036]

Thank you, this video helped me out so much, personally use a dried out wine quark to rest the trem on. I ran into the issue with different string gauges and the trem not sitting flush (always too high) and I never thought to tighten the spring screws. But this also helped me realize that maybe 2 guitars with a Floyd rose is enough for me lol.

[@squeelerjakeaxcradle7095]

Mate you made me chuckle because our cat loves it when I'm restringing my guitars,play time hence why she loves my strimming wire lol.Also l purchased the Frankenstein from your Oxford branch and l have to say your PMTcompany is a great music shop and customer service is top notch. Keep rocking these channels my friend. Anyone wanting to buy anything from pmt won't be dissapointed because this company in my opinion is superb ☺☺

[@KonorDraven]

I loved the fact that you took all the strings out actually, it shows the whole process.

[@stephenghudson6179]

This was easy to understand and helpful. Took me ages to find a suitable video about the Floyd rose system set up.

[@JohnR-mh8yx]

Very insightful. I recently purchased a Jackson with a Floyd Rose system. The first floating bridge type guitar I've owned since the early 80's and had forgotten the intricacies of restringing one. This video helped refresh an old rocker's memory. Thanks!

[@larryfranklin3305]

I have a Ibanez with a double lock tremelo ,I changed strings for first time,it took two days and a lot of patience,all cleaned strung and tuned sounds great 👍 hardest part was tuning it after the new strings were on before locking at nut after that it was smooth sailing 🎵🎶🎧

[@APK-pn4qh]

First time I changed strings on my old Ibanez RG with the Edge III trem I cut all six off and it took motherf*cking HOURS to rebalance that trem lol. So I got in the habit of doing one high then one low string at a time working in from the outside E strings. Now I have a 5150 with the Floyd, doing all six at once is a lot easier than the Edge trem. Great video dude. Loved your Jackson 7 facts video too. Subscribed!

[@JSGuitar80]

Yeah, I think most of us learned that the hard way.

[@wettoguitar4265]

Does that make it really hard to clean the fretboard? Wanna get a floyd but fearful of all this graft haha

[@JSGuitar80]

@@wettoguitar4265 No, not at all. You just have to loosen them. Loosening the strings takes a bit longer than a regular stop tailpiece, but otherwise it's the same process.

[@APK-pn4qh]

@@wettoguitar4265 no not really. The Floyd is definitely easier to take all strings off for a deep clean of the neck and restring and balance as opposed to say the Edge trems.

[@naegleriafowleri2230]

even with edge is better to do one by one to prevent any setup changes and block the bridge with something

[@blazes8n]

One of the best videos on the FR set up I have seen. Top geezer as well, very likeable and engaging. Thank you 🤘

[@aaroncicanese]

Locking tuners on a Floyd equipped guitar are a god send when restringing imo, just makes it super convenient,

[@MarkSmith-vy3tq]

Commenting here cause I guess he turned off comments. So much for the "& other tremolos" part of this. He (obviously) did the Floyd--and I did take something useful from it--but what about the other trems??? I've got several other guitars with trems not-Floyd. This is misleading & minimally helpful if you have/use Floyd's already.

[@donsimon63]

One of the best how to videos on the net. Congratulations

[@jordanjozwiak4]

I refer to this video everytime I change my FR’s. You explain so well thanks so much for making this video. I’ve gotten really good changing my strings thanks to you!

[@MT_800]

Great video! I'm planning to get a Jackson X Soloist with a Floyd Rose Special, and something I wanna do is block it off and change string gauge to an 11-56 set for Drop B. However, I dunno how much set up work I'll need to do for the nut.

[@andymcmillan9260]

Nut should be fine because they're normally not traditional nuts. They are a special "Floyd Rose" nut that pretty much allows any string gauge to sit in it because it's a locking nut. The major work is the blocking of the bridge. That's going to be troublesome if you're doing that alone. And kinda eliminates the whole point of a Floyd. But I suppose if Mick Thompson does it (his sig model has a blocked off Floyd because he prefers the feel of a Floyd bridge) then it shouldn't be an issue. You can buy actual locks for them that screw into the body. That way you don't lose sustain.

[@kruse8888]

Sounds like you’ll be better of with the hard tail model. Getting a FR just to block it is(not to be a dick) a rookie mistake. A hard tail is much better for drop tunings and can be easily modded with a brass block for some added sustain.

[@kruse8888]

@@andymcmillan9260 You don’t lose sustain by blocking your trem. You actually gain some. Two pieces of wood does the trick, no screws or glue needed. But as I mentioned in my comment to Heidi, buying a guitar with a floating trem just to block it makes no sense when a hard tail model is available.

[@RJW14]

Now for Spring adjustment I've never been able to do that in 1 go, however for intonation, I seem to have a golden eye since every time I eyeball a saddle adjustment it's spot on. Also, the tension bars on the headstock help keeping the guitar in tune when you lock the nut. You set the bar up so that the string makes 1 angle flush over the nut from the fretboard end of the nut to the bottom of the bar.

[@everlymurdoc2327]

Amazing!! An up to date video on a floyd rose!.. and its in-depth too!! Bought a fender hm last year as my first Flotyd Rose guitar and most of the videos were dated and useless. Nice one Dagan!

[@meagainokay7673]

Ahhh, the memories of the past. Faffing around for ages with trem systems only to break a string a couple of days later lol. So glad I switched to hard tails.

[@SPW1981]

Thanks! Beginner Floyd Rose user here and thanks to your great instructions, I managed to change the strings and everything went like a charm. I stayed with the same gauge of strings and my Floyd Rose was perfectly level after being tuned correctly. I was a little bit scared of too high tension after releasing the eraser, so I leaned toward the safer side. I wonder if it’s not easier to release the eraser as soon as the strings are attached and tune immediately with the eraser taken out? I also fixed the locking nut only at the very end - when cutting excess string length - so after a few re-tunings. Thank you so much.

[@luisbarillas7768]

Love your vibe and talent man. Keep up w ur awesome videos!!

[@hookian2010]

this instructional video has been alot of help ... I own a Kramer SM1 with a floyd rose trem.. thanks for your help... keep rockin.. your guitar sounds awesome

[@johnparisotto7924]

way cool video , its stood the test of time ,vernon is awesome btw ,, living color was great live ,,cheers

[@courtlaw1]

This guy obviously travels the world giving string changing tutorials for world leaders and sometimes Kings and Queens.

[@efallgren1]

I've always enjoyed your reviews and presentations. Thank you! With your video presentation, I now can restring an Ibanez RG420FB. You made it sound a lot less like Wizardry.

[@guitarhobbywithdannythemedic]

I have never seen Dagan work SO HARD!!!!!

[@kidda74]

Dimebag and Russel Brands love child 😂 Thanks for the tutorial! 🤘

[@jefferycarter1791]

Loved this video man....very helpful for I am just learning about my Floyd rose. Appreciate this...

[@stephendavid6903]

Great lesson man , good detail , explained well. Thanks a million :)

[@adamcampbell001]

Fantastic video just restrung my Floyd rose for the first time ever and went really well thanks for this video

[@RogerWhite-r4b]

Great tuition! Rock on.

[@totallyawesome80s55]

I've been messing with FR bridges for years and I've never seen that battery trick before. Nice!

[@tylergarcia1781]

This guys seems so nice. Thanks for the video I got a gig in two days and now I can change my strings and not mess up!!

[@KelticKabukiGirl]

Since its not going to effect tuning stability, I always add a few wraps around the tuning post so I DO have enough to reset the string in the locking saddle. Very important as a poor kid with a slightly expensive 1989 Ibanez S Series custom with lo pro II and wizard II and USA DiMarzios in a Blueburst flamed maple top and back. I only had tapes and 7" as new music in the 90s so I could a afford decent gear

[@mikewithers299]

Same here. I couldn't always buy new strings when i was younger, so extra wraps on the post saved my butt a few times.

[@KelticKabukiGirl]

@@mikewithers299 if you aren't recording or getting paid to gig, it was just kinda standard I the 90s for most guitarists to do. We just did what we thought worked and didn't have all the answers at our fingertips. And somehow POEPLE STILL fuck shit up.

[@TezTezTezTezTez]

Omg thus has put me off ever getting a FR system 😂

[@briietsai1997]

Literally about to get my first electric guitar with a Floyd Rose delivered to my house today so this came just in time lolll

[@mccartney2]

same for me..mine arrived yesterday

[@MinuteRiffs]

HAPPY B DAY DAGAN !!

[@FlintingSun]

Thanks for the tutorial! 🖖

[@72Z15SS]

I always loosen the fine tuners on the bridge first. Owning 4 different guitars with Floyd Rose type bridges I learned this the hard way...

[@joecalabrese5296]

yup

[@jb1934]

great video, i am looking at a jackson and just wanted to make sure i could be doing my own strings and tuning. but as an aside, i do also wonder how is the floyd rose actually so much harder than the common strat? on my old strat going from 9's to 10's or back again i've done that same adjustment of the two coil springs inside the body from the back, and for any 6-string changeover i've always had to iterate over all 6 strings 2-3 times typically.

[@forbiddenyoungones]

At the beginning of the year I finally plucked up the courage to change the strings on my Ibanez S670qm bought from PMT. However like you I’m a bit of a nerd who loves to know how things work especially guitars. I blocked the top of the bridge then took all the strings off, restrung. I removed the block and balanced the strings with the springs with a lot of string stretching which was the satisfying part for me and did not take very long. Finishing with a general set up. Pleased to see that I did it the way you demonstrated. It just seemed the right way to do it.

[@TheWindstorm2012]

Dagan, I owe you big time.

[@plisskenationbackfromthede3657]

Ive started doing 1 string at a time leaving the other 5 on. Cleanings a lil harder but its worth the time saved retuning. The new ones should stay pretty in tune if you stretch them as soon as you put them on. Takes like 10 minutes now. A quick retune an hour later and its good for months

[@Sighdaball]

If you jam something under the bridge to keep it in place while changing you can take them all off and the bridge won't move. I shim a pen under it. Works perfect

[@wizrom3046]

I change one at a time to on Floyd Rose guitars. It is much quicker because the tune (of each new string) will be instant. Also, I dont like totally taking tension off the neck and putting it back on unless really necessary. Every now and then its worth it for a good neck clean or fret dressing

[@hamzaismail9901]

15:37 IS A LITERAL VIBE !!! 🤘🎸⚡

[@Sighdaball]

The only aggravation I ever run into is adjusting those claw screws. Its a back and forth fight between turning and tuning and the bridge ending up like this _/ So I learned to jam a pen under the back of the bridge (like the battery) to keep it level during the string change. Change strings, tune, pull the pen out and the bridge is usually level. Only time that I have to touch those screws now is if I change string gauges or go lower tunings. But I've also learned to avoid that to by just buying different guitars for all that biz ; )..

[@josearalat]

So use a pen instead of the battery?

[@Theintruder100]

Thats a good excuse to buy more guitars I might have to use that one lol

[@Ultra-Collector]

I string all mine in reverse! Ball end at the tuners! No more poking your fingers or snagging a clothe when cleaning the stock! The strings break less too! Cut the first 6” off the straight end before locking it into the Floyd Rose trem. Give it a try! Use a tuning key winder!

[@bnastali]

SO great in detail. THANKS.

[@ILeviD]

13:56 definitely cover off 🔥🔥

[@waltervapour]

Pre-stretching the strings. Why not use the whammy bar to pull back on, and thus stretch the strings? It seems the easy way to stretch them, but I've never seen anyone suggest or do it, so I guess there's something bad about doing this? Anyone know?

[@Fret01]

You can do it that way. Nothing wrong with your method.

[@familiarpurrson8744]

Because you risk snapping the string at the saddle that way. Hand-stretching the strings or using a tool like the String Stretcha (I prefer using that simply because it does a better job than my hand does at stretching the string evenly. YMMV, as Dagan's obviously does) to stretch the string all along its length avoids having the string stretched at a single point, which is a good way to weaken or even snap it, especially when it's new.

[@Eddie-t4d]

I was just looking for this. Check the string gauges. Purchased an EVH Standard that didnt come with any paperwork. Store informed me that the gauge was never above .42. Broke a few sets of strings and fought for hours to get the guitar in tune with the D Tuna accessible. I downloaded the documents from EVH and found that it was a .46 6th that made it work perfectly.

[@kevmey6]

Thank you so much for this. Some of these other videos have had me practically scared to fuck with it talking about how "difficult" it is.

[@PaleCaretaker]

Yesss, that i was looking for. I want to buy my first guitar and I'm afraid to buy guitar with trem. Too but this guitar has locking blocks. No affordable guitar have it.

[@sirlost94]

Just got one of the new Kramers... I'm in love with FR now lol

[@WCWMidnight]

i have seen many tutorials about this and some say to loosen the screws in the back before you start the entire procedure. Kind of makes sense if you keep tightening it every time, you will run out of room at some point. What are your thoughts?

[@jvdubz]

This is great! Thank you. Very helpful :)

[@dellwilson]

I’ve played guitar all my life and never had a Floyd. I just bought a Wolfie on eBay so I was happy to find Floyd 101 at Dagen U.

[@crustybunz]

October 2024. Great video. Have this running while I'm restringing my Ibanez RGX570, just to keep me frosty. Cover off. I feel my body gives sonic and other bio feedback when I play.

[@tjayw03]

Can you do how to properly clean them

[@paulyoung4781]

Pmt online great place,always get my guitars here,just got my jem last week here and is brilliant guitar cant wait to order my Marshall code 50 next month PMT best place for guitars always helpful and friendly,just wondering if I can change my strings from 9s to 11s on the jem? Will i have to set the intonation and will I have to tighten the claw or loosen it I'm new to the floating tremelo system thanks

[@ixxionmetal]

Thanks. I followed this and had no problems. Now I finally know how to do it haha

[@adriancoppin977]

Hi Dagan, Many thanks for your vid on changing strings on my Schecter that has a FR floating bridge. The guitar is brand new and arrived with a busted B string. I’m gonna strive to replace all the strings early next week. Wish me luck!

[@redberry3852]

I've seen some folks resting a Floyd Rose with ball ends up top at the tuning machines so how you do that ??? Thanks ... GOD BLESS !!!

[@geeman88]

Additional things I've learned over the years: 1. Tune from the middle outwards, alternating from wound to unwound strings. 2. Final tune in playing position rather than "lying down", gravity effects your tuning! 3. After locking off and final tune, stretch the strings using with the whammy bar. Spin it 180 degrees from playing position and quickly push down 2-3 times. Recheck tuning again, then hardly ever tune your strings for the next 3-6 months (unless there are significant temperature changes).

[@welern2liv815]

My first floater was '86 Ibanez Roadstar II. I noticed then that if you lay the guitar on its back, the weight of the trem pulls strings sharp. So #2 agreed. I pull on each string to "stretch" or settle it into place before locking and pitch holds after lockdown. #3 agreed. Would you please explain your theory behind #1 since I have never noticed a reason for this starting at middle-out alternating plain and wound? Or am I not understanding? Ty.

[@geeman88]

@@welern2liv815 I found working from the centre helped with tuning stability until the strings have properly settled, and reduced breakages of the unwound strings. No right or wrong string tuning order, I just found it cut down my tuning time.

[@welern2liv815]

@@geeman88 is it due to a 3/3 tuner headstock design like gibsons where the 3,4 are farthest, 2,5 are next then 1,6? Or do you feel like it saves time on a strat/ibanez style with 6 tuners on one side?

[@geeman88]

It is more about the balancing act of keeping everything in equilibrium as you restring and tune up; the tension needs to be as consistent as possible due to the springs supporting the floating bridge. The more tension you "give" one string, the more it "takes" elsewhere.

[@jamied4486]

Alright so i watched this last night, i have a kramer baretta vintage. I changed the strings and now it wont stay in tune at all and the action is like a foot off the fretboard. How do I fix this myself since none of the techs nor anyone from Gibson can tell me what the problem is they told me to just replace it. Its brand new it just needs a set up

[@TheFiredragon01]

Did you change the string gauge? If the base of the trem has risen (pulled up towards head of guitar on an angle) you can tighten the trem claw screws in the back of the guitar to make it level/flush with the top of the guitar again. That should restore the action to where it was (hopefully)...

[@jamied4486]

@@TheFiredragon01 no i used the same gauge. This is my first floyd rose, i lowered the bridge. Got the action where i want it now i just cant get it to stay in tune. I tighted the trem screws and the whammy seems a little tight now so ill probably loosen them a bit. Is it just a matter of tuning and retuning to get it stay in tune? The second i lock the strings it goes out of tune

[@dean3703]

My saddle blocks fell out because I'm idiot that picked the guitar up. Do I put the block back in with the hole facing the tuning pegs or the hole facing the floyd rose system?

[@PMTVUK]

The Floyd Rose system, the little hole is for the locking screw to slot into.

[@dean3703]

@@PMTVUK thank you so much for the reply and confirming that for me.

[@gawainemellors]

Dagan, great vid, as always, but what I do is to feed the new string through the tuner, and use the ballend to anchor the string in the machine head, so basically the string is backwards.......

[@DaganWilkin]

That works too! However you don’t get much spare excess string incase something goes wrong…. Plus personally I don’t like the way it looks! 🤭😂🤘

[@gawainemellors]

@@DaganWilkin oh yeah, never thaught of that, only really a problem if the string snaps, cheers Dagan, keep up the great work......

[@gawainemellors]

Hey Dagan, just watched a vid on the Thomman channel with Steve Vai's guitar tech who leaves the ball end at the machine head......just sayin'......haha...

[@DaganWilkin]

@@gawainemellors That’s cool man, Kirk Hammett does as well. Just not my jam 👍

[@ryanbuan2466]

You also dont get poked by string ends on the tuning peg posts if you use the ball ends as anchors.

[@bustercrack788]

Put the ball ends of the string at the tuners. That way you don’t end up cutting the string twice 👍

[@SketchEtcher]

Wouldn't help much with those strings because they are unwound at the end.

[@commentfreely5443]

when you cut the ball off, there is a thick piece of string for 1cm or so which stick well at bridge end when tightened

[@TomJoad832]

i do it like this too

[@scribeofsolace]

i did my tension turn on 1 go as well :) awesome video mate

[@jacelii]

Are you going to visit Nottingham PMT store for a Vlog?

[@terryodonnell5739]

Awesome presentation on how to do this. Great personality and natural born teacher. Thanks for the video. And I a cover off guy.

[@williamwilson4424]

I love this guys videos. He reminds of what Jack Sparro would be as a guitar tech.

[@WarrenAndrews-w5x]

I've learnt something!😎

[@Phillospillo777]

I always over tighten the low e when tuning up I found it balanced the rest of the strings in half the time. So if I’m tuning to standard I start by putting the low e in f# then when all the other strings are in tune the low e usually levels out back to E

[@ilovejapanesemusic3858]

Thanks that was very helpful😊

[@zoomzoom3950]

I like playing a FR, I don't like working with a FR during string changes. I have 4 guitars with FR. I still haven't played a better trem though the Hipshot headless comes close.

[@lungloogie]

Nice! Thanks Bruther! Great Info!

[@workingorder2189]

How do you restring a Kahler trem?

[@tommya5957]

The best method I found was to place a wooden paint stir stick under the bridge, then remove all the strings, re-string and then final tuning. Very easy and quick way to keep the bridge in almost the exact position as before removing strings. Takes very little effort to replace the strings this way.

[@mikemichniak9964]

BEAUTIFUL guitar!!

[@deanblank5344]

T - handle wrench!!! A three millimeter t-handle wrench to be exact. It works wonders in regards to working on a Floyd Rose and the lock in tuners. You'll never use allen keys agin after you've used one. You can thank Eddie Van Halen's guitar tech,Tom Weber for that tid bit of information.

[@NWTMasterWolf]

Have a JS32 Dinky Orange coming today. Thank you for teaching me the basics of the Floyd Rose (Yes I am a newb) LOL.

[@BirnieMac1]

Absolute champion I hadn't changed the strings on my floyd guitar in a loooong time and completely forgot how to do it Though I'm definitely not brave enough to use a battery for a wedge

[@NewGoldStandard]

Thank you VERY much.

[@tvv911]

Great video!

[@century2077]

What do want for Xmas ralphy? A new set of strings for my guitar mom. Sorry you'all put your eye out with those. Lol

[@randall9000]

Ohhhhhhh fuuuuuuuddddgggggeeeeeee

[@g4joe]

String up your "Red Ryder" Ralphy.

[@padawan9127]

Hi, I'm considering my first FR guitar but worried about bends. if you use a floyd rose 90% of thr time for gigs, how do uou get over this, say for unison bends, without the other stringd going out of tune. Cheers

[@keyboardwarria]

I've heard a lot of people say to tune the guitar in the playing position because the gravity affects the string tension when it's laid flat on the work surface. But you didn't have any issues with that

[@kirkhunter6868]

Just now finished my first time SUCCESSFULLY stringing my first ever floyd rose jackson and i gotta say, I love that something I've done for the past 15 years can still find new ways to make me feel like a stupid, angry, sausage- fingered toddler baby boy..... ....but now i get to use this cool whammy bar a couple times before never touching it again because I dont sound like Tim Henson the second i try to flutter.

[@raze167]

8:30 ffs I was watching this and for real my cat just hunted the strings and I had to start over!! 😂

[@CITRUS_slmeon]

My low E fine tuner doesn’t move anymore I also tried to use a towel and a tshirt but it didn’t move. Have I fcked up?

[@captainmilk2691]

Are you using a very heavy string gauge? A lot of fine-tuners bridges have difficulty with very heavy low E strings. You'll also occasionally see broken fine-tuners or string claws on those strings (claws on Kahlers, bendmasters and Gibson TP6s). What I recommend, take the current string out, apply a little oil to the fine-tuner and get it moving again, then put on a lighter low E string. I know it's annoying having to use lighter strings than you'd otherwise want, but the alternative is potentially breaking something.

[@workingmissionary]

thanks for the pointers