How To Setup Rode PodMic | Best Settings

[@rotospace]

This was FAN-F'ing-TASTIC! I bought this mic thinking I'd come back to the studio and plug it into my PC and go... 17 minutes later, I know exactly what to do. Many thanks.

[@carboncopy8]

I am so glad that there are all of these videos but not a single video shows us what software to use and how. Everyone just talks about gain levels and calls it a day. I am completely new to the scene. Bought a rode podmic, a focusrite scarlett solo 3rd gen and currently have zero idea how to use them. I have been browsing for 5 hours and I still have no clue.

[@picsby.lesley]

I feel you… I bought the rose streamer x, $399 and it’s costed me so much more. First of all I couldn’t connect the blue yeti to it. I bought an adapter which powered it but I couldn’t hear anything. I invested in the $100 pod mic, with its stand, and IT DOES NOT COME WITH THE XLR CORD. And even if I get the cord for it, I don’t think it will connect to my laptop.

[@corycosta6257]

I got the mic and now my headset won’t work 😢

[@livebythelight]

Hey! Have you learned anything since then? I keep finding videos on why we should "adjust to -12db" etc. but nothing on HOW to do anything like that. Is a software required or something?

[@cainesy7913]

It's literally in the comments my guy.l

[@Oniichanani]

get better at googling lmao

[@WolfmansGotNards]

I am a professional in video and photo, but when it comes to audio, I am a total novice. I recently bought the Podmic and just waiting on my Wave XLR to arrive. This video has helped me out so much, so thank you for this!

[@KunalRajputStudio]

By far one of the best videos that explains everything so clearly, thanks for putting it up!

[@jenmovies]

The relief I felt when you put the pop sock on. haha Thanks for a great tutorial!

[@coldshot1611]

Wow, bro thx for this video it just answered all the questions I had within this video. Very good information for someone like me with no knowledge of how audio works.

[@WECHEWGOOD]

This was a really helpful guide on the rode pod mike, thank you.. But i am having problems while using Zoom H8 recorder to record a podcast with the Rode pod mike. am getting a lot of background noises what should I do?

[@dreadloresystem]

Thanks, sir. I really dig the PodMic but have noticed that it's super *breathy*. Thanks for the heads up (and link) for the pop filter!

[@houseofgraceworship]

I see ppl pair this with a cloudlifter. I have an Apollo twin. Would I still need that? Or could I reach adequate volume without it?

[@TalkChou]

Hello, what is the name of the software that you can see what dB is your mic on the minute 11:25

[@nigeldwalsh]

Really great video thanks. Any reason why you wouldn't use a XLR to USB-C cable direct to your Mac?

[@vikashsoni8230]

Can use evo 8 for good results?

[@scooba789]

Was there processing on the Podmic at 11:30?

[@leifashley]

How did you create custom Rode PSA1+ arm covers?

[@criticadeepoca1789]

Do you recomend using a fethead with the RODECaster Pro I ? I think it sounds better with a booster but I would like your opinion. Great videos by the way. Greetings from Mexico.

[@kettnercreative]

I believe we have a video where we tested the RodeMic specifically with the Rodecaster pro. I believe it was 50/50 and ultimately came down to how loud you are in person.

[@Aquamaui.mp4]

Hey there, thanks for the video! Just received my Rodecaster Pro 2 and hopefully you can help me out! How do i disable the monitoring of my Mic while using it? I dont like to hear myself and its freaking me out, because i cant find a way to do so. Thank you!

[@CliffFennell]

You can shut off monitoring in the settings

[@CorazonesGemelos]

Hello. What program can I use on my computer to configure the audio coming from an M-Audio M-Track Duo sound interface using a Rode Podmic microphone? (For reaction videos)

[@rolejarczyk]

Good and helpful video, thanks!

[@joegophotos1]

Are Rode xlr good ?

[@TVCUC]

What software were you using when addy bright, radio, etc?

[@TrendyKPop]

will this mic with focuserite 212 and a fethead be good for recording voice overs for documentaries? I tried the Shure SM7B but it makes my voice sound too masculine deeper than it should be for my female voice( i already have a deep voice ) even though i loved how smooth it sounded… i am trying to look for alternatives with little to none post processing.

[@vipereaper]

what is the rodepod mic called? I cant seem to find it for obs on my microphone list

[@EmilyOen]

The PodMic USB can directly connect to computer, iPad and phone. But cost more than the standard PodMic. So I took the USB version since I have no experience with the other devices and audio in general😅

[@purecountry70]

Could you do a video on the Behringer xenix SR 40-8 bus please

[@muhammadmushtaq1377]

purchased brand new 3 PodMic s , all are giving a hissing sound, changed cable, using with zoom h6 recorder and used a pre mixer also but hiss sound is there

[@kettnercreative]

The hissing is from your Zoom H6... Zoom mixers have horrible preamps... That being said, the hiss might be from the H6 headphone amp as well. Make sure to listen on your computer to confirm.

[@1Wayfix]

Hello. Do you have any suggestions. My friends. When we playing Have eco when they talk. They hear double. Them selfs. But not. My. We are 4 people. My set up. Rode pod mic. Caster duo. And my speakers. What will need to be change. On the settings. For the pc or. The caterduo ???? Thank you.

[@omershalmon9218]

So it's just a guess but if you are using speakers it might be because the sound circulates back in (friends talk -> your speakers play the sound -> your mic picks up on the sound and plays it for them just like if you were talking...)

[@1Wayfix]

@@omershalmon9218 the problem was. The configuration at my interface. Thank you. For. Answering

[@Dartage02]

I'm currently using the focusrite 3rd gen, but in my opinion its sounds bad without boosting my gain on the interface, but then i get the hissing sound from it. I have to use voicemeeter to adjust my voice and remove some hissing. Do you have any advice for that combo?

[@kettnercreative]

If you're married to the 2i2 Gen 3, you need an inline preamp. That will resolve your hiss issues, but at that cost, you're better off selling your 2i2 Gen 3 and getting a Vocaster (assuming you don't need the Line Level or Instrument inputs.

[@Dartage02]

@@kettnercreative actually i run with the scarlett solo 3rd gen, i dont know if this have low base preamp or i'm doing something wrong

[@Nobody2day553]

I use the Scarlett and voicemeeter and i have no issues. Sounds buttery smooth. First time I hooked it up my friends in discord said I sound like I was about to give a motivational speech. Lol

[@Nobody2day553]

I have my Scarlett gain set to about 50% make sure 48v and everything else is off. In voicemeeter I have my mic volume on default and the compression set between 2-4... sounds great. You also have to make sure all of your sound settings are 48000hz and use the "mme" on devices in voicemeeter.

[@swiftcolin]

I have the Rode PodMic and the Native Instruments Komplete Audio 1, I seem to only get a signal and sound through my headphones when I turn the gain to full on the audio interface, any tips to fix this?

[@maryamazadmard]

How do i use for my smartphone?

[@timbotibbetts]

I'm using the Røde podmic, Scarlett Solo (3rd Gen) and the Beyerdynamic DT990 Pro (250) ohm. Do you have any suggestions?

[@kettnercreative]

I would just recommend getting a popfilter for the PodMic.

[@SuomiWitch]

14:26 what software???

[@danielrohregger994]

I have the pod mic and the podcaster but I am still not happy with the sound. What can I do? Does it all needs to be done in post?

[@nordlightlive]

Hello Can I use Rode podmic for singing? Or maybe I need to choose Sm58 / Sm57. And I also want to record my ukulele. So which microphone is the best for me?

[@Saithiel]

Amazing video! Thanks!!

[@roughriderboy53]

Awesome video could you use the AI-1 to connect the Rode mic to your computer?

[@kettnercreative]

Yes you can!

[@JadeSambrook]

I like how heavy and good looking the Rode PodMic is. But mine picks up a terrible amount of electrical interference (almost like a 60Hz hum). I dont have such an issue with any other mic other than the Rode PodMic. I returned it and exchanged it for a new one, but same issue. I tried it with my Scarlett Focusrite 2i2, my Rodecaster Pro and my Zoom H5. Still, it picks up a crazy amount of electrical interference.

[@mondotv4216]

You have to remember that the podmic is a dynamic mic so if you're starting off with any kind of electrical interference in the cable or gear it's going to be amplified much more with a dynamic mic than a condenser mic. Try and locate the source of the noise (often flourescent tubes) and eliminate that and use good quality cables. A proper balanced XLR cable should not let any noise through. As a test try running all your equipment off battery to see if you have dirty AC power - and I mean all equipment. I very much doubt the mic itself is the culprit.

[@ThePianoSenseiWay]

for gain. . . what about the "level?" On my interface, on the microphone channel I have a "gain" dial and also a "level" dial. They both affect the output. Where should I put the level while adjusting the gain and vice versa?

[@lisir5814]

Could you give me some advice on making the choice between NT1 4th with AI-1 SET and a single NT1 5th since the price of theses two are almost the same. Thank you!

[@BW-0217]

what are your thoughts on a behringer um2? i have one can get it to work right and tech support has not been helpful

[@iamzealot4262]

what software is that?

[@rajan6666]

How to plug electric guitar to PA system? Please suggest

[@ttotwinkhan732]

what app or software did you sue to see how much db your mic was at?

[@seyfoyun]

It looks like Logic Pro

[@bobzadokblokjr]

How did you get your name on the boom?

[@kettnercreative]

I just put gaff tape over their logo then used a vinyl decal with my logo.

[@leifashley]

Damn I wish I'd have watched this. I had no idea there were 2 XLR cable types... which explains why my Rode arm clips won't work with the non-star quad cable because it's too fat. That being said, yep, I ordered 6ft cables, too short even on the same side of the desk lol

[@kloelinhnguyen2850]

Hello, can I connect directly this PodMic to a Zoom H6 for recording ? Thank you so much.

[@kettnercreative]

Yes you can, it might be a little bit hissy, but it will work.

[@kloelinhnguyen2850]

@@kettnercreative thanks a lot

[@mtbboy1993]

Here is an potential issue you might experience, and the fix: I'm on windows 11, I don't get any audio, the Ai-1 shows the mic is working. But Windows does not detect it, it's due to 44100 HZ being default. On the task bar right click on the audio icon->audio settings. Click on the name of the audio interface, in my case Ai-1, click Format, select 48000 HZ.

[@napoellisyt]

I just have a GO XLR Mini, The Elgato LP Mic Arm and my Rode PodMic, will that work? And how would you set it up with a GO XLR Mini?

[@kettnercreative]

That's a great setup. If you want tips for the GoXLR Mini and Podmic, check out: kzbin.info/www/bejne/fnXSl6iHgatma8U

[@napoellisyt]

@@kettnercreative I am hitting around -7 DB in OBS with all the settings from that video, is that good?

[@SoComposed]

6:27 always coming up 3"-4" short? Yeah, we hear you man. Common problem.

[@dzhoni-boy]

thanks a lot man😊

[@itoznachoz]

I'm using M-track Solo as my interface and right now my mic sound so bad and muddy. I have been using voicemeter to setup when I used my old mic before and right now idk how to like setup like you said for the -12 to -18 db thing. I'm a real beginner on this. somebody help :(

[@kettnercreative]

Sure, we can add it to the list! Not sure when we'll make it, but I can try.

[@tunaforlunch]

I wanna run a pop fulter but... The podmic looks SO good.

[@kettnercreative]

Right? Tough call.

[@jayfloresdigital]

I have my podmic connected to the zoom H4n. My recording sounds like a high pitch chipmunk. What could possibly be causing this?

[@kettnercreative]

Factory reset and try again. I would assume something is wild on the eq/processing side.

[@ivanjanku7839]

8:30 - That's what she said :D

[@LAYONNNN]

nice one !

[@purecountry70]

XENYX SR 40-8 bus

[@princelawrence4062]

My man: "Silver cable heads are ugly and stuff eww.." (WHIPS OUT WHITE CABLE) 💀💀

[@bengtturvey5005]

p̶r̶o̶m̶o̶s̶m̶ ✨

[@paiger6058]

Why does this video need to be 17 min. absolutely ridiculous.

[@kettnercreative]

Meh. If I make it short people say ‘why didn’t you mention’…. I’m willing to give you a full refund for the video.