How to Setup VoiceMeeter Banana For Live Streaming

Learn how to setup VoiceMeeter Banana for live streaming success.
In this video, learn how to setup VoiceMeeter Banana for streaming with StreamYard.
When using virtual audio devices, you can easily route audio into your live streaming broadcast.
Download VoiceMeeter - vb-audio.com/Voicemeeter/bana...
What you will learn about VoiceMeeter:
- How to download VoiceMeeter Banana
- How to setup VoiceMeeter Banana
- Setup VoiceMeeter Banana for StreamYard
Try Streamyard free here - streamyard.com
#VoiceMeeter #VoiceMeeterBanana #HowTo

[@StreamYard]

Have questions about using VoiceMeeter Banana for live streaming? Leave them in the comments below or reach out to our Support Team here: streamyard.com/contact

[@tuckers_games]

I have a different question. Is there any way you can show all comments on a live stream without pushing show?

[@StreamYard]

@@tuckers_games please send all feature requests here: forms.gle/1MTHi4hyUxS7DVKU7

[@Vikkeponken]

How do I play my favorite music with voicemeter banana without getting copystriked?

[@StreamYard]

@@Vikkeponken, you'll want to make sure you are using non-copyrighted music. That may exclude a lot of popular music. Here are a number of free and paid resources for finding music for your live streams. Have you tried any of these? streamyard.com/blog/live-streaming-audio/music-for-live-streaming-free-and-paid/ Christian Karasiewicz 🦆

[@The-Weird-Show]

So this still doesn't answer my question about why the audio won't work or play if I am not in the studio? ?

[@TheFranswahStudio]

Thanks for letting me be part of this. Was fun!

[@StreamYard]

Thank you!

[@carlsmith6613]

nice... so nice to view an instructional video without all the extraneous word salad before getting to the actual 'how to' instructions...! to the point, step-by-step instructions...! most excellent...! thank you...👍

[@NoXiouSHD]

Hey StreamYard! I am currently using a HyperX Quadcast which has a very nice built in noise suppression and reduces key clattering and mouse clicks. But when I set it up in VMB it "overrides" those settings and is constantly picking up all noices. I use slobs as recording for streaming and could use input filters there but would rather keep the preset settings with the microphone.

[@TheFranswahStudio]

You can use filters in OBS alternatively. does the quad cast have software? I’d like to help you a bit more with this when I can

[@dean3184]

advice on how to set it up for slack? bottom line is that I am trying to put an EQ on my mic so it doesnt sound so tinny

[@smartbiz888]

Easy to follow tutorial...Thanks! 👍

[@StreamYard]

Glad it was helpful!

[@ligachessmaster310]

YOU SAVE MY LIFE!! THANK YOU BRO!!

[@StreamYard]

Glad you now have VoiceMeeter Banana set up! Let us know if you have any additional questions. Christian Karasiewicz 🦆

[@0kundu0]

soo how would you add Streamdecks voicemod sounds into voicemeeter, so that you know your friends on discord will also be hearing it ? this is one of the better and down to earth explanations of an tutorial I've seen lately, good job :)

[@StreamYard]

You would want to ensure you have the proper audio source selected. For Stream Deck, I think it’s a matter of adding your system audio. Christian Karasiewicz 🦆

[@safal.sunchueuri]

One Love ❤From Nepal🇳🇵 Brother 🙏

[@RangersRabblePodcast]

If you are using 2 or 3 mics do you set them up the same as mic 1? Might be a stupid question but I have no idea 😂 do all mics go to B2?

[@MidnightInExile]

If you're using those mics all as separate UBS inputs, I think you'll be assigning them each to their own hardware input. If they go through an A/D converter, then you MIGHT have the option to assign them separately (mine doesn't) but if you don't, you can assign them to mic 1 and control their levels discretely on the A/D converter itself. B2 is what goes to the stream and others on the stream (unless they are on one of those mics in the room with you). You would assign everything but your own mic to A1 and set that for your cans so you don't hear yourself coming back.

[@darrenhunt7026]

Hi François, great video thanks ! If I wish to not use voicemeter when using my computer on the go, is this OK? Will it be automatic or will I have to ajust the windows audio settings each time? I only use my pro mic for braodcasting. Cheers François !

[@TheFranswahStudio]

You’d have to change the playback device everytime!

[@norwoodventuresunlimited]

So, after setting everything up the way you advised in this video, if I play anything audio wise from OBS, will the audio play on Streamyard?

[@TheFranswahStudio]

Play from OBS in what way?

[@DonMoody]

Great video helped me reset VM, much needed. Another item is will be going to a reunion and want to livestream at the event. Yet I do not want to take my Yeti Mic. Is there a way to add a second mic to VM for this type of event. How to video would be nice.

[@TheFranswahStudio]

Add the mic into a separate hardware input .. just as we did with the original mic.

[@DJAnubisMetalTavernRadio]

Im still watching this as im interested but im curious if you can use this program for 2 mics in the same room? We currently are having issues with echoing and would like to use 2 mics but if this software can solve the problem can you give me some input and advice on how to set that up? Many thanks!

[@StreamYard]

Hey there! If you are having issues with echoing, it may be because you have two separate instances/devices for each camera and microphone. Since you are in the same room, here are some things to check: - Are the speakers on your devices off? Since you are in the same room, you do not need to have the sound on. Having the sound on would cause echo. - If the speakers are off, but you are still having echo, how close are the two hosts to each other and what are the microphone input levels set to? If the microphones are far away from your mouths and you are turning up the volume to compensate, this can start to pick up the other host's voice. The solution there is to keep the microphones close to your mouths and reduce the gain and/or move the hosts further away from each other. - Katie 🦆

[@ceomom2213]

Your video is very helpful compares to others I have watched so far but there are two things I don't understand. 1. Why I don't hear the voice from the microphone? I can see the meter goes up to the green line but I don't hear anything. The background music is perfectly working. 2 How did you connect the voice meeter to the streeming site of your choice? I think you did skip that step. Eg if you want to stream live on the other website and not to that streamyard. How do you do that?

[@TheFranswahStudio]

1. Toggle on the output source you want to monitor your mic on. (A1-3) 2. You setup the same output source in any application you want your mic on.

[@gingskie18]

Thanks for this tutorial,big help

[@StreamYard]

Hi, thanks for your message! For support, please visit streamyard.com/contact and we can help with any questions you have on getting started with Streamyard! ~Trevor 🦆

[@peterjohansson213]

Usuing this tutorial and doing some testing it took me a few hours to realize that Streamyard doesn`t actually record the audio coming in through this Voicemeeter setup, however recording on for instance KZbin does. It would have saved me some headache if this would have been mentioned in the video.

[@ChristianKarasiewicz]

It should. Do you have everything set up to be fed into StreamYard? As long as you have the correct mic, speakers, etc selected, that feeds into your broadcast. You’re basically setting up a virtual cable to route the audio from different applications into StreamYard.

[@ChristianKarasiewicz]

Also check out this tutorial. You may need another piece of software if you’re bringing music in. kzbin.info/www/bejne/kGi6hpSYgtF-j7M

[@Add_Username_Here]

I need help with a problem I have with voicemeeter. Since I started using voicemeeter, when I raise or lower my desktop volume it never changes, so everytime I load up a game I have to manually lower all of the volume settings in the games which idk will effect the sound in the stream or not. Basically every audio source, from games to discord, I have to manually change the audio levels because holding fn and changing the volume doesn’t change it at all. Is there anyway to fix this so I can accurately equalize mic audio and game audio? Because even when I get it to sound good I’m my headset, the output levels don’t change and don’t wanna blare loud audio when I start streaming. Should I just select my regular headset as default source and keep the voicemeeter mic aux output as the default source so it’s just my mic with the configured settings active without changing the audio I hear? Any tips would be much appreciated 🙏🏻

[@StreamYard]

I would check on the computer to see if that keyboard shortcut is mapped correctly. Also, make sure another application isn't using it. Christian Karasiewicz 🦆

[@JT-lm5eo]

What if your not using the microphone from the computer, I'm using a berhinger interface plugged into the computer via USB. Everything is running out of the interface headphones microphone except the music is on the computer. Any help or direction would be greatly appreciated.

[@StreamYard]

Hey there! You would choose the interface as your microphone in settings > audio. Does it appear when you go to webcammictest.com? - Katie 🦆

[@joeystambayan4383]

I hooked up a sound card to put an echo to my mic and i also hooked up my headset in there, but my problem now is that I can't hear the music frim my headset,my A1 is set to my soundcard in which where my headset is hooked up to.

[@StreamYard]

Inside of StreamYard, what do you have your mic and speakers set to - they can be different. Christian Karasiewicz 🦆

[@ARI_RUOTSALAINEN]

Two people , two headsets , how to set up voicemeeter I wouldn´t hear own voice, only friend´s voice and we should hear each other? I am using basic version. Virtual input A is selected so I can hear the video and also my voice because on my mic input I have selected A selection ,otherwise there is no output for the my and friend´s voice for the video editing software.

[@DutchUltra]

Can i use this to separate my youtube music from in-game sound when streaming? I dont want to stream the music, but I DO want to hear my music! Possible?

[@TheFranswahStudio]

Yes, you can set it up so you dont send Music to your stream but still hear it yourself

[@tythesoundguy]

Great stuff, thank you! Is there a known way to separate two guest caller's audio in StreamYard? Meaning Guest one into VoiceMeeter Virtual input one and guest two into Virtual input two?

[@TheFranswahStudio]

Depends on how you’re taking the call

[@tythesoundguy]

Thanks foe writing back! Callers would be audience members watching on StreamYard, if that answers the question

[@onercebeci785]

Thanks all.. I made the settings. I can hear my voice from the microphone, but the music file playing on the computer is not heard..

[@StreamYard]

Our support team would love to help you with this! Please contact our 24/7 live tech support at streamyard.com/contact ~Mylon 🦆

[@coininformationserrano]

Thanks for sharing 💪

[@TheFranswahStudio]

Thanks for watching

[@StephenSabludowsky]

I'm at a loss. I set it up in Banana exactly as stated on video but unfortunately as soon as I made the output, voicemeeter input, the audio from the this video i was watching got very rough and choppy. I set the input to voicemeeter aux output. Any help is appreciated. thanks

[@TheFranswahStudio]

First off, I’m seeing a lot of confusion about the ins and outs.. we set our playback device to the voicemeeter input and then send that to an output which is used as an input on your apps. The choppy sound could be corrected by switching your A1 source from WDM over to MME

[@laxplayer72]

I've downloaded both links, I have voice meeter as an output/input in my sounds, but I do not have the app itself..

[@TheFranswahStudio]

You need to open the app from the start menu! If you didnt install a start menu icon then it will be in your program files

[@jaydennguyen953]

could you please show me how to connect focusrite sound card, studio one 5 and paltalk. thanks

[@StreamYard]

Hi there! Please contact our 24/7 live tech support at streamyard.com/contact We are happy to help! - Katie 🦆

[@freeradiomars]

How do i get the sliders to control the output on the recording? The slidersdont seem to have any effect on the recording at all -- only on my headphones monitoring

[@StreamYard]

Are you in StreamYard? Or just trying to control the output in VoiceMeeter?

[@pauljhermann]

do we have a solution to get discord audio IN/OUT to Streamyard browser without bounce-back? thanks! so that guests in streamyard can hear discord and all discord audio channel can hear all of streamyard content?

[@StreamYard]

How are you routing the audio currently? Christian Karasiewicz 🦆

[@LaSalamander]

I think I'm missing something fundamental: when using VoiceMeeter in Streamyard, since all of my computer's audio is being pushed into Streamyard, that includes other guests' audio also being sent into Streamyard, creating an echo. What am I doing wrong? Is there a way to have VoiceMeeter send audio from only one particular application rather than the entire computer?

[@TheFranswahStudio]

Yes, you can skip the default device setup. But that echo is due to a loop you’ve created.. make sure you arent sending the audio back to itself

[@SealOneMedia]

I want to share the Zoom Application/ browser on streamyard, I still cannot get the audio out while broadcasting live. Any luck?

[@TheFranswahStudio]

Set the Output of the app to the Voicemeeter Input you’d like to use.

[@Add_Username_Here]

Does this process also work the same if used with OBS?

[@StreamYard]

It should be roughly the same. Christian Karasiewicz 🦆

[@Arosboiii]

can you help me every time I download the Banana version i reset my pc and when I open voice meter its the regular one I've redownloaded so many times and I cant seem to get the banana version.

[@StreamYard]

Please reach out to our support team at streamyard.com/contact so that they can help you. - James 🦆

[@ViTVi]

Will I be able to take advantage of VoiceMeeter Banana while I am using an external sound card? Or do I have to choose between the two? Thanks by the way for this tutorial.

[@TheFranswahStudio]

Yes, make sure the correct sources are selected

[@ViTVi]

@@TheFranswahStudio Cool. Thanks

[@TheFranswahStudio]

@@ViTVi no problem!

[@NancyMyrland]

Would you use Voicemeeter for all audio, including podcasting and video creation, which I often do in StreamYard anyhow?

[@TheFranswahStudio]

Absolutely, VM can mix and master all your sources at different volumes on your stream. Gives you more control

[@NancyMyrland]

@@TheFranswahStudio thank you so much for answering!

[@TheStircrazys]

what i cant seem to do is make the music lower and the microphone higher if i turn down the music it turns the microphone down as well its frustrating as live streaming they cant here me and yet if i use the same set up for live gigs its fine

[@StreamYard]

You may want to check that you have everything on the right channels. If they're on the same channel, it will turn everything down - like a master volume. Make sure you have that set up correctly in VoiceMeeter. Christian Karasiewicz 🦆

[@mufasa.4036]

Under sound settings, the output and input are switched. So where the input should show up, the output is showing up instead. you have any idea on how to fix this?

[@TheFranswahStudio]

That’s actually correct. As the output of voicemeeter would be an inout on your system

[@erikahera]

I need to desinstall realtek from my computer? I do not see all these channels from the bananas.

[@TheFranswahStudio]

Realtek often causes conflict with the drivers of the app. If you don’t have all the channels i suggest you start by re-installing voicemeeter

[@charlesp7012]

So, if you're setting all audio to come through VM, when not using my laptop for streaming, will my audio not work unless I open VM?

[@TheFranswahStudio]

Correct, you will need VM open. In the Menu you can set it to open on startup..

[@beakufx9133]

Can it be use to , record

[@nosyparker10]

this session only to setup microphone ? what about hardware input ?

[@TheFranswahStudio]

You can apply the same logic for other sources on your computer. Take a look at VB-Audio Cable’s for additional inputs.

[@rafagasdeportivas6679]

Audio & instrucciones en español please 🙏🏼🙈

[@hidin_7926]

by the way whenever i close voicemeeter my audio just stops working and when i reopen voicemeeter all the settings i changed isnt there anymore so do i have to always keep voicemeeter open?

[@hidin_7926]

or do i have to save it maybe? cuz i followed the video until the streamyard part because i dont do streaming so did i miss something?

[@StreamYard]

Great question. You should save them. This way you don’t have to recreate them. Here is some helpful information on doing this in VoiceMeeter Banana. vb-audio.com/Voicemeeter/VoicemeeterBanana_UserManual.pdf Page 28 is a good please to start on saving configurations. Christian Karasiewicz 🦆

[@ProphetRichardRowe]

Is there anything app like this for iPhone?

[@StreamYard]

Hi! You can use StreamYard on your phone from your browser. You don’t need to download an app or anything. Your guests can also join on their phone. For Android, we recommend the Chrome browser. For iOS, only Safari will work. NOTE: iOS only has video on version 12.2+. Older versions are audio-only. For the best possible experience, we recommend that you and your guests both use a laptop/desktop. - April 🦆

Muy complicado, sin usar esa aplicación que es bien complicada, ¿se puede meter audio del escritorio o del sistema de otra forma?, Gracias.

[@StreamYard]

¡Hola! Desafortunadamente, esta es la única forma de traer audio desde su escritorio a streamyard, si está usando una Mac, ¡puede echar un vistazo a nuestro tutorial de loopback! ¡Algunas personas encuentran ese mezclador de audio un poco más fácil de usar! kzbin.info/www/bejne/n3_cfq17jsqGmKM Si tiene alguna otra pregunta, no dude en comunicarse con nuestro equipo de soporte en streamyard.com/contact para que puedan ayudarlo 😊 -Sam 🦆

[@altair8994]

why do i have sound latency only when i am streaming? it didnt appear on any other software except streamlabs

[@StreamYard]

What type of camera are you using to stream? Also, have you run a speed test to see what your upload and download speeds are? Upload is what is important. Here is how to check your upload speeds. streamyard.com/blog/how-to-live-stream/recommended-upload-speeds-for-live-streaming/ Christian Karasiewicz 🦆

[@samahramadan9267]

لأ اله الا الله محمد رسول الله صلى الله عليه وسلم وبارك على سيدنا محمد وعلى اله وصحبه اجمعين

[@TheStircrazys]

so its driving me crazy so followed your video got no sound at all unless i press on the fader gain the desk to which i named so does nothing put it to a put microphone as suggested in to b2 but cant here it at all when live streaming its a mess so hade to return it back and removing voice meter all together

[@StreamYard]

Did you follow all of the instructions? Is Ear Trumpet also installed?

[@TheStircrazys]

Ear trumpet I missed that on your video never mind thanks for your support

[@StreamYard]

@@TheStircrazys depending on what you’re trying to do, you may need it for routing purposes. Christian Karasiewicz 🦆

[@shezadsharif4061]

Can we integrate whatsapp calling in voice meter for taking live calls while using streamyard

[@TheFranswahStudio]

Anything on your computer can be connected to voicemeeter

[@ziusplays4165]

Why do I have the normal voicemeeter? I installed the banana and even the installer said it was banana.

[@ArthurMorganVP]

Did you figure it out? Even if, if anyone else has the same question: I had to search in the little window search bar for "Voicemeeter Banana." It still downloads both I've found, and I had to specifically search for the one I wanted.

[@giacomoporra7850]

What would be a solution for Mac OS?

[@TheFranswahStudio]

Currently there isnt a virtual mixer available on Mac OS.

[@StreamYard]

Check out Loopback from Rogue Amoeba. rogueamoeba.com/loopback/ If you're using a Rode NT-USB Mini, you can try using Rode Connect. www.rode.com/software/rode-connect Christian Karasiewicz 🦆

[@rubansgiri4543]

Can this be used for clubhouse??

[@thomasman5030]

just did all steps, but stream sound goes on even if i mute all channels at banana, did I miss something?

[@TheFranswahStudio]

Make sure you have the correct sources selected on your stream.

[@itzmrmayhem]

how do i make it so that the stream only hears certain apps?

[@StreamYard]

Hey there! You would need to set it such that the audio output of the apps that you want to collect is the virtual audio inputs of Voicemeeter. For example, set the audio out of Zoom as Voicemeeter Virtual Aux Input. What apps are you wanting to use? - Katie 🦆

[@joker4702]

I can not chat for more than 3 seconds as my voice through my headphones is unusual and not used to it, is there any way of turning this off but still broadcast my voice?

[@StreamYard]

What does it sound like? Do you have any processing enabled? You want to try playing with the settings that you have enabled and figure out which one you need to adjust to get your voice sounding like you want it. Feel free to share a link to a video where you get two different voice sounds. Christian Karasiewicz 🦆

[@joker4702]

​@@StreamYard Voice sounds like a radio presenter LOL really crisp and clean vocal sounds. I'm just not used to hearing myself when I talk and constantly stoping mid sentence, but I am getting used to it, I guess it will take time as i have just started streaming over the last week or so. thanks for the reply, much appreciated. Your Video is awesome btw, would never had got it sorted without your tutorial. Thanks :)

[@IBeOutHere]

Turn off the A1 (or whatever hardware output you headphones are set to). It'll still record your voice but you will no longer be able to hear it.

[@CreatorsOutlet]

what's everything used for?

[@StreamYard]

You can use VoiceMeeter Banana to bring audio into your live stream. This could include background music, sound effects, and more.

[@Johnson5791]

When I open up a game while in discord apparently my mic makes everything echo but i cant hear it, i just irritate everyone in the party. Any idea how to fix this? this voice meeter thing has given me to many headaches

[@StreamYard]

Hi there, Can you try enabling "Echo Cancellation" in the Studio Audio settings? -Evan🦆

[@Johnson5791]

@@StreamYard i tried but still the same issue, i uninstalled and im going to run through the whole process again! I followed someone else before this video so i might have gotten something crossed, appreciate the response!

[@StreamYard]

No problem, you might also consider plugging in headphones so the sound doesn't loop from your speakers back through your mic :) 😊👍🏼🦆

[@wesleymoon2027]

how come i go to download it and it says reboot pc. then when i reboot my pc it doesnt download and it doesnt show up

[@StreamYard]

Sometimes you have to reboot your PC because you have updates to install. Check there first. Other times, they require you to reboot your machine to continuing with the installation. Christian Karasiewicz 🦆

[@ArmedReject]

As soon as I changed the playback to Voicemeeter Banana, exactly how this video shows, desktop audio instantly turned into a garbled dumpster fire, was hoping this one would fix my issues but Im probably just going back to basic Voicemeeter because it did not do what ever the hell Banana is doing wrong

[@ArmedReject]

Found the Fix, Change from WDM mode to MME, audio crackling went away instantly

[@whydoweneedousehandlesihateit]

My youtube kinda got weird and says audio renderer error after I switched to my main output source.

[@StreamYard]

Hi. Did you try quitting the program, and restarting your computer? Then try launching VoiceMeeter again. Christian Karasiewicz 🦆

[@whydoweneedousehandlesihateit]

@@StreamYard thanks for the reply, I think I've figured it out 😅. I had to change the sound input and output in the control panel to make it work again.

[@StreamYard]

@@whydoweneedousehandlesihateit ad to hear you have it working. Let us know if you have any additional questions. Christian Karasiewicz 🦆

[@GuidoGamin]

Okay this is gonna sound prolly pretty stupid... But I installed voicemeeter not knowing voicemeeter banana was free and better (still new to this audio stuff) so now I want banana but do I have to uninstall voicemeeter in order to have banana to work or can I just install over top of voicemeeter cuz banana gives u both anyways. I really do not want to uninstall voicemeeter becuz I'm prolly gonna fuck my shit up lol but I'm getting impatient and been searching for tht specific question for 3 days now and can not find anywhere.. Plz help before I send my head threw my monitor... lmao

[@StreamYard]

It looks like you have to install VoiceMeeter and then install VoiceMeeter Banana. You've got this! Christian Karasiewicz 🦆

[@GuidoGamin]

@@StreamYard ok I have banana now but was I suppose to de install the VB cable tht I installed with the regular one and get a different or new Virtual audio cable install or no

[@GuidoGamin]

@@StreamYard srry for buggin u and making this seem more complicated then it prolly actually is.. lol

[@trashcaster]

@@GuidoGamin When you want to change versions of VoiceMeeter, you run the previous installer for the version you want to remove. It gives you the uninstall button, click it. Reboot the PC. Now run the new installer for the upgraded version, and it will install that one instead. Reboot the PC, and run the new program

[@o.r.d3448]

What happen to the EXE file for Voicemeeter Banana mixer? All there is ZIP Package

[@Klokorix99]

unzip it and you get the exe

[@o.r.d3448]

@@Klokorix99 How do you unzip voicemeeter banana? He didn't show us that step.

[@Klokorix99]

if you right click on windows 10 it should show a option to unzip or unpackage the file, it should be straight forward from there :)@@o.r.d3448

[@GoFigureGo]

is there a macOS version?

[@StreamYard]

StreamYard is browser-based, rather than a downloaded program :) You can go to streamyard.com on your Chrome or Firefox browser to get started! ~Mylon 🦆

[@GoFigureGo]

@@StreamYard 🤔the program (voice meter banana) I see this video is only for windows user

[@StreamYard]

@@GoFigureGo correct. If you need a Max version, check out Loopback from Rogue Amoeba. Christian Karasiewicz 🦆

[@Flenkr]

Why B2 instead of B1 though?

[@StreamYard]

Great question. It’s more about personal preference. If you use B1, it has everything turned on by default, versus using B2, which makes it easier to set up because all of the defaults are not on, so it might be less confusing if you’re just getting started. Christian Karasiewicz 🦆

[@biyahenglaboy3580]

after following your settings, now I can even hear something.

[@StreamYard]

Hi there! Please reach out to our support team at streamyard.com/contact so that they can help you 😊 -Sam 🦆

[@THEGHOSTOGJAYSPEED]

I guess that's what made me frustrated with voice meter no one could ever explain simply how to monitor your microphone if I can't hear my voice through the microphone what good is it many years later I still think voice meter is piece of garbage another tutorial who don't highlight that problem

[@StreamYard]

Hey there! Here's how you do it: select "A1" on whichever "Hardware Input" channel the microphone is running through. Let us know if that works! - Katie 🦆

[@THEGHOSTOGJAYSPEED]

@@StreamYard I went through some of your other videos and I figure it out yeah it was very easily A1 so many people have overlooked that part I haven't been using that software for over but I guess 9 or 10 years thank you for taking the time to reply I hope you and your family is doing well

[@StreamYard]

Sure! No worries :) Happy to help! - Katie 🦆

[@TonyaTko]

I'm still confused 😕

[@TonyaTko]

1. If voicemeeter is the speaker, how do we get audio to play through our actual speakers when we're not recording? 2. How do I get browsers to play in my broadcast? 3. How do I get Zoom conference on a separate audio channel so I can mute it? 4. How do I use this with OBS? I was sent your video by support, but it doesn't answer my questions. Help 😩

[@StreamYard]

Hi there! Please reach out to our support team at streamyard.com/contact so that they can help you 😊 -Sam 🦆

[@HughesManHVAC]

Is this available for Mac?

[@StreamYard]

Hey there! Loopback is the Mac equivalent: support.streamyard.com/hc/en-us/articles/9123870861972-How-to-use-Loopback-with-StreamYard - Katie 🦆

[@spikeimperial]

weird whenever i download it it never says banana

[@aye796]

same. Something is wrong with their downloadbles

[@t3digital-marketing843]

@@aye796 After Install, you have to search your computer menu of programs for the Banana version. it installs the versions separately on your computer

[@aye796]

@@t3digital-marketing843 yep figured that minutes later after commenting this.

[@pauladrianetorneros4231]

I don't want to mointor my voice.. how do i do that?

[@StreamYard]

Hi there! Please contact our 24/7 live tech support at pulse.ly/ssqko9cy35 We are happy to help! - Katie 🦆

[@mindaugaszigmantas2137]

wondering why we even need set all this to get same as without anything ? :D whats reason ? like we cant stream with just our heatsets?

[@SuperDuperJeff]

@@mindaugaszigmantas2137 You can. The point of this is to separate audio streams and have control over each one. So, if you wanted to play music and have it not get recorded, that is an option

[@mirandacarter2102]

wow this video rocks.. and he's kinda cute :) hehe

[@TheFranswahStudio]

👌👌

[@tuckers_games]

First

[@alperenerbay8044]

its too complicated; you should make easier solution. I cant do this.

[@StreamYard]

Which step are you getting stuck on? Christian Karasiewicz 🦆

[@ChrisHunterSavesTheDay]

I really don't see the purpose of this app. I guess I missed why you would even use it in the first place and I watched the entire video.

[@TheFranswahStudio]

Many reasons.. 1 location for volume control of stream. You can introduce more than 1 audio source into the stream..(music, browser, game) and mix it at different volumes. You can apply EQ, Comp, Gate, and other filters right from the interface.

[@saltielkupololo]

You were talking too fast.

[@StreamYard]

If you have any questions, please leave them in the comments. We're more than happy to answer them. Christian Karasiewicz 🦆

[@saltielkupololo]

Can I use a wireless Headset on the same program?

[@TheFranswahStudio]

@@saltielkupololo yes