How to Setup your own System Information Panel to display your PC Vitals! AIDA64 Tutorial!

[@franchesco6797]

It took me a while to figure out how but you can also make vertical bars instead of just horizontal. Just go to the Bar tab in the Sensor item gauge and invert the Width and Height measurements. The bar displays vertically and AIDA automatically displays its progress in a vertical manner.

[@DanKamYouKnow]

That’s awesome to know! I never tried that out. Appreciate the tip and thanks for joining my Discord to show me your panel, it looks great!

[@franchesco6797]

​@@DanKamYouKnow Thanks! Just register in the AIDA64 forum so you can download the custom gauges/sensor panels people post. I got a lot of ideas from other people's designs, including the vertical bars, which nobody explained how to do! That took so long to figure out and was so easy to do...

[@DanKamYouKnow]

Hey guys! Hope everyone is doing well. This video is a bit longer but Aida64 is a tricky program to use so I wanted to make sure I cover EVERYTHING to set up your sensor panel. If you found the video informative, please drop a like. If you end up creating your own panel, please join my Discord down below and show me what you have created! Show me your sensor panels: discord.gg/6w9Vz6APw6 Thanks for all your support guys, and I hope you all have a great day!

[@BANIAAAAK]

You are saying its basic, but simplicity is key bro. Finally some brief explanation about it i've search all youtube for a TUTO like this. Thank you!! +1 SUB

[@DanKamYouKnow]

You’re welcome and thank you for your comment and the sub! Appreciate it.

[@BANIAAAAK]

@@DanKamYouKnow Althought the FPS do not seem to work :( even tho RivaTuner is on

[@DanKamYouKnow]

Make sure RIVA is in your task tray. I have occasionally had issues where RIVA closes by itself

[@xenomorph420]

I know this is 2 years old but i really wanna say thank you so much for linking the alternative purchase to aida64. Words cant really justify how thankful i am. And to think i almost paid 50$ for aida64. I would have been pissed if i had later found out i could have gotten a key for a couple dollars. The least i can do is sub and like the video but if you have a donation thingy of any sorts let me know so i can donate for saving me half a bill.

[@lalec1417]

Thank you for taking the time to do this.

[@DanKamYouKnow]

You’re welcome. Thanks for commenting

[@johnhawkins6160]

Thank you so much!!! Awesome looking out!

[@thgaming3763]

Thank you, This video helped me a lot! Keep it up😤

[@DanKamYouKnow]

Thanks for watching and your comment! Let me know if you have questions. 😎👌🏻

[@rickss69]

What we need is a tutorial on creating custom gauges...the rest is relatively easy.

[@DanKamYouKnow]

I will have to look into it. I mainly made this tutorial to bring awareness to AIDA64. Lot of PC people still don’t know how powerful it is.

[@bryndigsbooks4491]

Great video as always!

[@DanKamYouKnow]

Thanks Babe

[@TribalBC23]

Thanks for the video.. Starting my first custom panel this weekend.. :)

[@DanKamYouKnow]

You’re welcome! Awesome, it’s so much fun to design and come up with how you’ll want the panel. It’s a process but worth the end result

[@wesbtrm]

Thanks man, wasnt willing to pay thenprice Aida64 wanted for something that can be done a little more generically for free.

[@tpk5481]

Good shit man keep it going

[@DanKamYouKnow]

Thank you!!! Going to keep the grind going!

[@vladimirberry]

Another great vid!

[@DanKamYouKnow]

Appreciate the love my dude

[@demon_killer5310]

Nice panel homie 😎

[@DanKamYouKnow]

Thanks dude! Appreciate the love

[@peterrichardson1054]

Great tutorial - thank you! Do you have your sensor panel available for D/L because it's just what I'm looking for? Is there a reference sheet that explains the correct sensor panel list for the job from the menu? I'm not totally sure what displays what. Thanks again.

[@DanKamYouKnow]

I made my template from scratch, I’m not sure what you mean by a reference sheet. You kind of just build it, piece by piece and size it to whatever size screen that you need it to fit. My panel would only fit exactly my size that I made it too. Really depends on your canvas size and where the panel will end up

[@peterrichardson1054]

I read my message again and yes, it's difficult to realize what I mean Lol. I refer to the list of sensor items in the list when you select NEW. I understand most of them and what they do but I was wondering if there was a white paper explaining each sensor and what it does. Your video was very helpful but there are some there that I was curious as to what they read/did. Peter

[@gregorydobson4307]

Great tutorial Dan,. How would you go about doing same thing but on a separate 3.5" lcd screen .

[@DanKamYouKnow]

Thanks! I assume the LCD screen has an HDMI out to plug into the graphics card? All you would do is set up Aida64 to have the exact same panel size as the 3.5” LCD screen. Then drag the panel over to the LCD screen.

[@ArrivedLowa]

Hey Dan, what Omen pc do you own I saw u did a review on the L45 which you said was borrowed but I see you’re other like upgrade videos and it says 25/35 L Omen just wondering because I’m looking to buy one and the eventually go through the tutorials of you upgrading it many thanks :)

[@DanKamYouKnow]

Hey! I have a 25L and posted a TON of videos on modifying and everything about it. The 45L is a loaner from HP that I have to return soon

[@nightshadre9875]

So do you just have it setup on your second pc monitor or do you have like a set 7inch raspberry pi screen?

[@DanKamYouKnow]

You setup the sensor panel to be the exact size you want for where it’s going. So if it’s going on 1920x1080p monitor and it’s going to stay there, you set up the panel as 1920x1080p

[@demon_killer5310]

Nice stream dan

[@DanKamYouKnow]

Thanks Demon!!!

[@brickman_cave]

Which font are you using on your panel from the first part of the video? Thank you!

[@DanKamYouKnow]

I believe it is “Unispace”

[@markevans3026]

Great stuff, 1 question. Is it possible to have for say processor current temp, minimum and max temp ? thanks

[@DanKamYouKnow]

You can set up your min and max numbers for the items you are using. So yes, you can.

[@markevans3026]

@@DanKamYouKnow I mean like inhwifo you have columns current temp, coolest temp and hottest temp ?

[@DanKamYouKnow]

Oh, I see what you mean. I don’t believe so. Pretty sure AIDA64 can only present current values and not history values like HwInfo can with mix / max / average.

[@markevans3026]

Ok no problem. Cheers

[@PaulEkert]

are there no templates provided by the actual makers for this app?

[@DanKamYouKnow]

I don’t believe so, but you can find websites where users upload theirs.

[@PaulEkert]

@@DanKamYouKnow yours looks pretty cool. Anywhere I can download it from?

[@DanKamYouKnow]

Well, I built mine and don’t have it uploaded anywhere. I’m sure you can find a ton of templates online, mine is very basic compared to some out there

[@jodymarty3179]

I'm sure this video is amazing but I can't get past step 1. Lol. When I hit show sensor panel a blank panel does not show up. Some ugly blue panel opens. I can click change and set up a gauge I want but it won't let me click the OK button. The OK button is grayed out. Any help??

[@DanKamYouKnow]

Did you figure it out? I have no idea why that would happen. It’s actually been awhile since I looked at Aida64

[@jodymarty3179]

@@DanKamYouKnow yes I did. Thank you for checking. It made me name a graph. If I didn't type anything in the text spot it wouldn't allow me to hit ok. But I do believe I have bitten off more then I can chew. I have built and amazing pc for a friend but this aida64 software is kicking my ass.

[@DanKamYouKnow]

It’s extremely tedious

[@jodymarty3179]

@@DanKamYouKnow Do you know if there is a way to start with an image and then place your graphs over the top of an image?

[@DanKamYouKnow]

Yes, you should be able to add your own images.

[@Kreel12]

i cant figure out how to get my fps from my gaming monitor to show up on my sensor panel, it shows only my second monitor not my primary

[@DanKamYouKnow]

Strange. Riva Tuner should capture it from the full screen or 3D application. What FPS does it show?

[@Kreel12]

i’m trying to get it to capture CoD but it won’t. only thing it shows fps is 60 an that’s on my second monitor

[@DanKamYouKnow]

Try reopening Riva tuner after CoD is open. CoD and Riva tuner work very strange together. Mine usually works though.

[@Kreel12]

it worked

[@Kreel12]

thank u

[@MrWozOSRS]

how do you make your game in the foreground to show fps?

[@DanKamYouKnow]

You need to download RIVA Tuner Statistic Server

[@Fellyman007]

so how do you send the sensor panel to a separate monitor ie 3.5 inch screen in the pc case?

[@DanKamYouKnow]

So, when you create the sensor panel, you make the panel the exact same resolution as the place where you want it ( your 3.5” screen ). Then once your finish, you just drag and drop the panel onto your separate monitor.

[@Fellyman007]

@@DanKamYouKnow thank you 🙏

[@DanKamYouKnow]

😎🤝😎

[@DanKamYouKnow]

Yes, my monitors are connected to the GPU. You’ll want whatever screen you’re using to be plugged into your graphics card.

[@Fellyman007]

@Sulto if your using the little screen 3.5 inch one then you will have to use a separate programme ( driver ) to run it as I’ve found out doing a friends computer, but using a monitor connected to gpu then you use the Aida 64

[@richardbutch1617]

I downloaded AIDA64 and it does not look anything like you have. If you are going to make a video on a certain software show what screen will look like by default after you install it and then show how to customize the screen step by step.

[@DanKamYouKnow]

AIDA64 starts out completely blank, you have to populate the panel, just as I exactly outline in the video. Did you even watch or skim through ANY of the video at ALL?!? At 9:48, I start out with the blank panel and literally go over step by step, how I got there. There’s even chapters to find the “setting up the panel” part. 🙄

[@richardbutch1617]

@@DanKamYouKnow My AIDA64 Extreme starts already populated from the get go. It is version 7.00. If it was me and making the video I would have started with a blank screen and go on from there to show people how to add gauges etc. I will play it again all the way through but I don't to mess up what is on my screen until I learn it better. I already messed up part of the screen and the only way I could figure out out how to fix it was to delete the software and start over again. Is there a way to save what you have on the screen so you can go to it if you screw something up? Thanks for responding.

[@xenomorph420]

​@@richardbutch1617 Export is the save button, import is the load button. Hopefully you figured it out already but I'm leaving this here for others just in case

[@bats.1k]

Its not accurate but thank you

[@DanKamYouKnow]

What isn’t accurate exactly? All of my sensors are exact to multiple other programs

[@bats.1k]

@@DanKamYouKnow ryzen master says 30 while this says like 43

[@videodude8137]

Why do all of these youtubers start off with "What's up Guys"?

[@DanKamYouKnow]

Because I am saying what’s up to everyone before starting the video?!

[@Jrobb1999]

Are you offended that you are being greeted or by the use of the word ‘guys’?

[@Jrobb1999]

You joined KZbin in 2011 and you only just now decided to get all worked up about “what’s up guys”. That lockdown really got you didn’t it

[@Jrobb1999]

Would you prefer a more formal opening? Some thing “Greetings, fellow KZbin users, and welcome to the DanKamYouKnow KZbin channel”?

[@Zombified-]

You ever eaten corn the long way?