How to setup your TBS Tango II Crossfire Radio to work with Betaflight

[@ThumpahFPV]

For those trying to figure out why their sticks aren't corresponding to Mode 2, change the Channel Map under Receiver to TREA1234. Amazing guide, thank you for putting in the effort!

[@Jonsbasecamp]

For those with the newer Firmware: Press and hold Menu button Scroll to TBS Agent Lite Select with scroll wheel (push in) Select XF Nano RX You should see 4 options General Output Map Channel Map About

[@scrubbasher6418]

Thank you, thank you.

[@JunaidHassan-junaidslife]

This the best most comprehensive guide for the Tango 2! I have saved it and always come back to check for this. Thank you so much! :)

[@bencartwright9359]

Thanks for your video. I was ready to throw my tango II out the window as I couldn't get the stick inputs to register. Finally found out that I had to calibrate them, then they registered. I learnt a lot from your video.

[@tattootrader]

Dude! I owe you a friggin beer! Ive watched so many vids.. and each of em, the blokes would go on about how simple everything is.. so they gloss over so many important steps. Im a noob.. so its not so simple to me. This vid did the trick. Thank you!!

[@5zero7RC]

Awesome! Glad it helped you out!

[@tango_sierra8608]

Great video and I love how you sectioned it up for people who have some beginning steps done already! Thank you for this!

[@saikc5039]

Your video saved my life, the calibration where it said "+" was unclear so I always skipped that, now that I watched the video, my control is finally normal! Thank you

[@5zero7RC]

Glad it helped! Since making the video I have learned that you are supposed to only do the + shape once, not repeatedly as I do in the video. But it does seem to work either way.

[@Kgzyballa]

Let me just say that 5zero7 is fantastic and just helped me work through the issue I was having getting the Tango to connect in Betaflight. Awesome video and super knowledgeable. Hats off!! +1 sub

[@raykreisel]

Great video thanks so much - just got my first quad working with the Tango II. I could not have done it without your video

[@moblades1]

Thank you. Exactly what I needed to get my new Tango 2 and DJI working.

[@YonnBurgos]

Great tutorial! I leaned a lot today. New to the hobby!

[@killingfields5853]

Loved this video... its not just for newbies... easy to use to brush up on binding

[@stephaneguyon8577]

Best tutorial for the Tango 2. Especially for the RSSI on DJI FPV Goggles. Thank you so much !

[@johns1623]

This was a great help on my first build

[@CheezeBee]

thank you SO MUCH for helping me setup my tango!!! The segments were really helpful too. thank you

[@noelwesterbeek7775]

big help even 2 years later thanks

[@Kgzyballa]

Awesome video, thank you! Watched 5x and am still having issues (just sent over an email detailing things). Thanks again for all of the help you provide to the community!

[@michey7822]

I came it late to get the tango2, but it was worth to watch this

[@fpv_drone_adventure]

Thanks once again for teaching us .

[@31PSPNEO]

Thanks for your help, I got my tango 2 bin ans set up now.

[@michaelhamilton2376]

Good review. I found that on a FIRST TIME configuration, you must build a Quad Mode before the stick will respond in BF. You had already built some modes so the stick were working after binding.

[@5zero7RC]

Thanks for pointing that out. I bought my Tango II used and despite trying to clear everything out, some configuration was still there.

[@robwiensmedia]

I think this is what my issue is. Is building the "Quad mode" done in BF or in my Tango? I think I've got everything right up to this point but my sticks are not responding in BF..

[@elcacha_anda]

Great video! now im ready to enjoy the Tango 2 . Thanks a lot!!! bro!

[@danimalthefirst]

Nice one, saved me hours - thanks for chapter cues too

[@GizmoDrones]

Awesome tutorial, very helpful

[@nimhbot8919]

Thank you for helping me set up my new radio.

[@5zero7RC]

Happy I could help!

[@MrGunawan79]

Thank's you are helping me so much

[@dronejunkiefpv9556]

Thanks for sharing brother

[@_HarkonneN]

Wherry boring for me... BUT THIS VIDEO WHERRY USEFUL. BEST GUIDE ON KZbin WICH I FOUND!! 😅🤩👍

[@sheapyfpv8224]

Great video really easy to follow very clear instructions thankyou 👍

[@valkery8068]

Great video thanks for making it. 💪

I can´t see the Tango screem :(

[@jakestyles002]

This is an excellent tutorial. I am a CompleteNoob and followed all your settings, including switches (since I have no prior preference)... so now can you tell us noobs how to operate said switches to "arm" the quad? Thank you for your work. It is a great help to the community.

[@5zero7RC]

I think I made a mistake when setting those switches up for the video and had the 3 position switches reversed. But my intention was to set up the radio so that to arm, you first press the big button on the left side of the radio, then flip the 3 position switch all the way down to arm. I think the best advice is to look at the modes tab in betaflight and play around with pressing buttons and switches. You will see the little indicator move. Then move the bars to highlight the area you want that action active. The best example of this is where I have the 3 position switch set in the middle for the beeper. So try and see what you think would work out best for you. Prearm just means you have to have two buttons in the right position to be able to arm. Which makes accidental arming less likely.

[@jakestyles002]

Thank you for your response... I did figure it out, I am going to go for my "maiden" today. Last night I was bench testing it in the garage and two of the props "blew" right off during testing... lol.. leaving the "prop screws" still in place. This is quite the intricate sport.

[@5zero7RC]

@@jakestyles002 Good luck! Most of us learn a lot of lessons in this hobby the hard way :)

[@Resolvepestsolutions]

Damn good tutorial. Thanks you very much!

[@ZyaLuke]

This is the second video I've seen where you guys seem to have a different menu than me, I dont have a crossfire menu when I hit menu, no bind option anywhere that I can see either. When I hit menu it goes to the setup page.

[@5zero7RC]

Are you sure you are on the latest version of FreedomTX? I think version 4.11 is the most recent.

[@ZyaLuke]

@@5zero7RC I'll have look tonight but it's a brand new Tango 2 and I read the manual lastnight and it said that the Crossfire menu was replaced with TBS Agent Light but when I click on that it just says "Looking for devices" but will not pair no matter what I try.

[@5zero7RC]

I don't know if new radios come with TBS Agent Lite installed by default. If they don't you can follow this video to install it: kzbin.info/www/bejne/rV7HcnysgMl3rpY

[@ZyaLuke]

Crossfire Micro Tx 4.11 FreedomTX 1.29 TBS Agent Lite is the only option I have in TOOLS, that and something for Betaflight.

[@ggtv8432]

If betaflight doesnt read your stick input dont worry. You might have to create a new module on the tango 2, which is shown later on in this video! It was the case for me and I didnt know what was going on..

[@rueda82nd]

Thanks 4 sharing great info 🤛🏼😀

[@ignatzmorgenstern]

Great video! Thanks a lot! It was very helpful to me! Best regards from Germany! ;-)

[@TexasWaters]

Just to clear some things up you can use your Nano in sbus as well. Your yellow wire is TX to RX, your white wire is RX to TX. It's 8 channels or 12 not 16

[@MarkPurmal]

Thanks, this was very useful.

[@michalpesek1397]

Hey there! I need some help with my Tango II settings. When I push the pitch or roll fully on my remote controller, my drone doesn't achieve the full range of motion. It won't do proper dives or flips; instead, it responds slowly and with limited movement. I've followed various setup guides and checked my remote controller settings, but I still can't figure out what's wrong. Interestingly, when I test the controller in Betaflight's Receiver menu, everything appears to be working fine. Any ideas on what might be causing this issue?

[@sshdrones]

this helps. Thank you

[@maurogutierrez]

Hello, great, I have a 1W Tango 2 and an Iflight Helion with TBS Crossfire Diversity with Nano RX and the XF NANO RX option does not appear, I only see Tango II XF and Tango Wifi, Could you please help me, thank you!! ! 👍

[@lindseyrhoads7895]

I don’t have any aux options under inputs or any other menu page (working w a pre-existing model). Any idea what I may be doing wrong?

[@samuel_runggaldier]

Hello, I recently got a FPV drone from Iflight (Nazgul Evoque) and have big problems with the TBS Nano receiver and the Tango 2. The connection goes constantly lost even if the binding was successful. Have also tried to flash the receiver but it has not changed much. Sometimes the connection stays for several minutes without problems but most of the time after a few seconds the connection goes away. I had no problems with another drone with the same settings. Firmware of the remote control and receiver are up to date. Could you maybe help me to solve this problem? Thank you Sam

[@epp1026del]

Props off to ya man. GREAT vid. Mucho appreciated!!!!!!!! 🔥🔥🖤🔥🖤🔥

[@rawpicsfpv3516]

Hi, one question, do you have any idea how you can turn off the ADC Filter on the Tango 2? I´ve been searching forever now... Thank you:)

[@hanfpv3093]

You are a hero🙌🙏

[@5zero7RC]

Glad to hear this video is still helping people!

[@moley334]

I cant find in Config the reciever tab in the latest firmware update of betaflight. It doesnt say Serial based receiver in the tab. Its not even on the same config page anymore?

[@aminbehravan]

thank you man

[@villadante]

Thank you

[@azdronedude]

Great useful setup video Thanks

[@MrCrazyhack3r]

Should failsafe be cut even if i want to set up a gps failsafe ?

[@Cinoo90]

I thinking to get tbs tango 2 instead my dji remote dunno if it's good idea

[@fpvillain]

Do you have any good info on setting channel endpoints on the controller so they are correct in betaflight? (1000 / 2000)

[@kennykobitsfpv]

How do you make a 3 position switch. Also why do you have bst scl and bst Sda if you didn't wire them? Please make a new updated video. Tbs agent x and alot has changed.

[@OurSweetHideout]

in regards to failsafe? what if you have a gps and have gps rescue does that affect it, if you set failsafe to cut? I have an iflight nazgul hd, with crossfire coming in the mail soon, i have the tango 2. just on the simulator at the moment. and ill pair this with dji goggles ofcourse, so watching your video now as ill need to know how to set it all up :)

[@NatureDigitalPhotography]

so helpful thanks!

[@evanoliver68]

Audio alerts for Radio Signal strength... I have no option 'RFMD' for V1 under logical switches? I've scrolled through all the options but it is not there. Any idea what i missed? Thanks

[@5zero7RC]

I believe you need to tell the radio to find sensors before that will show up. I forget exactly where that is, but it's in one of the menus. Run that and then RFMD should show up.

[@evanoliver68]

@@5zero7RC Ok thank you I will look for that

[@dronecrashchannel3263]

12:50 - My TBS T2 is stuck here, can't seem to be able to select Multi (it's stuck on plane). Damn it so close again...

[@5zero7RC]

That seems really strange. When I spin the scroll wheel it changes what is selected. I assume your scroll wheel works in order to get this far.

[@jakestyles002]

I feel you... being "Noobius" in FPV is a daunting and steep learning curve. I have been working on "getting in the air" since the begining of "lockdown"... this guys vid helped alot!

[@nathankrutke8702]

Awesome video. Thank you. What is the board youre using underneath the Kakute f7?

[@5zero7RC]

I think when I made this video it was a Tekko 32 F3. You can get all the specs for my build here: rotorbuilds.com/build/20006

[@nathankrutke8702]

@@5zero7RC So cool. And thank you for the very fast response

[@mauricioinocencio]

Hello 5zero7, thanks for your video, helps me a lot, but i have a little problem, When I put the throttle in the bottom position, the drone comes down but start to jump, bouncing on the floor, do you know what could be?? maybe Im missing something, thanks

[@5zero7RC]

That is totally normal. A feature called Air Mode causes that, and you want that feature enabled. To land you need to disarm just before you touch down. Have a look at this video: kzbin.info/www/bejne/j2qpgYKvbahpf5Y

[@mauricioinocencio]

@@5zero7RC awesome... It works!! I disabled the option and is not bouncing anymore... Thanks mate 😌

[@momp87]

Nice video man!

[@5zero7RC]

THanks!

[@goal1358]

THANKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKSSSSSSSSS

[@atomichemi]

what is logical switch 1 if it doesn't get a link in the special function?

[@bkfpv]

Thank you.

[@dee1251]

I have a question when I tried to create a new model this error comes up scrip memory allocating panic error. what does this mean? I have been duplicating models and erasing them is this because of that?

[@5zero7RC]

I would try searching google for OpenTX and then the exact error message text in quotes and see if anything comes up. I assume your memory card is not full?

[@ClarkDroneFilms]

20:43 what if my sticks do not match? I have tried the rxange command, when i lower the failsafe values right down to 750 (min) it just goes down to 750.

[@5zero7RC]

Are you saying your throttle on the radio does not match the throttle in betaflight, or the values don't go from 1000 to 2000? Or do the bars not move at all?

[@ClarkDroneFilms]

@@5zero7RC It moved from the absolute minimum to maximum in betaflight, lower than failsafe and then it popped back to 1500 after a split second. But i fixed it using the OUTPUTS tab in the menu of the tango. It was the endpoints of roll and pitch (yaw and throttle were fine)

[@sheersy2987]

Nice comprehensive guide which I followed thanks. The only issue that I have is the my telemetry RSSI show 49 not 99 in my DJI goggles what am I missing! 🤔

[@5zero7RC]

I feel like I had mine showing that for a little while when playing around with it. Try to follow the section lower down on this page that says "Display LQ (Old Way)". That should get you 99 in your RSSI display.

[@sheersy2987]

@@5zero7RC cheers mate I just figured it out I knew there was something I was missing🤔 in the receiver tab in betaflight had the wrong RSSI Aux channel assigned in the top right box Lol 😊👍🏻

[@michaelhamilton2376]

You did not set the AND condition in the Logical Switches (per Oscar Liang). For LO2 and LO3 you should set the condition of "AND LO1" so that they are only true when the RFMD has value

[@5zero7RC]

Humm, strange, the alerts appear to be working as expected when I go out and fly.

[@michaelhamilton2376]

5zero7 RC - mine were going off way too early so I reviewed the details of Oscar’s tutorial.

[@K1200S08]

Thanks! I was re-watching the video multiple times trying to figure out why he creates L01 if it's never been used. Now I see why! He just missed the important steps.

[@dee1251]

If I want to bind another drone can I copy the first model , change the name and bind it?

[@5zero7RC]

Unless you have something different between the settings on the two drones, you don't even need a new model. You can bind multiple drones to the same model just fine. You only need a new model if you want to change the channel mapping or one is a wing and one is a drone, etc. For the most part if you have multiple drones you can likely use the same model.

[@dvillamil01]

Excellent, question: 25:17 To add the RFMD, must the drone (rx) be linked with the Tango 2?

[@5zero7RC]

I believe you need to have the radio bound to a receiver and run the "detect sensors" function with everything running. At least that is my assumption which could be wrong, but that is what I did at some point.

[@dvillamil01]

👍👍 Thx

[@myfpvshots]

I have 2 fpv quads and bounded one by one. I used the first quad and changed to the second one. Do I need to rebind the second quad again?

[@5zero7RC]

No, once you bind all the receivers in your quads you should be good. Any powered up receiver will get a signal from your radio after they are bound. So be sure to only have one powered up at a time! :)

[@myfpvshots]

@@5zero7RC Thank you for your help :)

[@herphermits]

I have binded my receiver to my TBS Tango 2, but yet i can't see movement of my sticks on Betaflight, nor can i configure my switches. I have followed your instructions here to the letter, yet i can't seem to find a way to control my drone. Both are bound, but nothing's happening... Please help. I am using a Zeus5 AIO fc 4in1 esc board with the TBS Crossfire nano Rx, on my LR frame.

[@5zero7RC]

My first guess is that there is an issue with your wiring. One simple test would be to swap the tx and rx and see if that makes any difference. Or maybe the UART you are wired to is not what you have betaflight expecting.

[@herphermits]

@@5zero7RC Yes, thanks for the tip. It seems that i have soldered the ch.1 wire incorrectly at the wrong solder pad. I have no idea what RC means on the board, but that's where i soldered my ch.1 instead on the R2 (Rx) pad. Now i've switched it over to the right pad, and everything's working 100%. Thanks for the help.

[@5zero7RC]

@@herphermits Awesome! Glad to hear you got it working!

[@cjacob741]

so im stuck. I only have uart 1,2,and 4 in BF and I cannot give my stick movements to. show up in BF under receiver. what am I doing wrong

[@5zero7RC]

The UART's you have will depend on your flight controller. Most flight controllers will have a manual that shows a wiring diagram. Be sure to use the UART that the manual suggests and do NOT use a UART that is designed for only sbus.

[@flo-ridafpv5713]

Good tips BTW

[@johnkenney7217]

I got a Tango 2 to mainly use as a controller for Velocidrone or other simulator, before I start using a real quad. But after all firmware downloads, my up to date Windows 10 computer (both of them) will not recognize the Tango 2 as a joystick (clicking that mode in the Tango 2). TBS sent me a replacement main board, but still no go.

[@5zero7RC]

Are you sure you don't have a windows driver issue? Last year a windows 10 update broke the controller feature. I think there are a bunch of videos out there showing how to fix that.. kzbin.info/www/bejne/iXXRg4aCaNd3ra8 kzbin.info/www/bejne/f3-Te5WfnZxsbbs

[@johnkenney7217]

@@5zero7RC Ah, thank you for the suggestion. My Tango 2 device does not show up in any form, even the Windows update neutered version. Nor is there a "libusb..." heading in Device Manager. But you're right, it might be a driver thing. With device manager open, when the device is turned off or on, that screen "blinks" like something is going on, but no device under any category is recognizable as the Tango 2.

[@fpvraver]

Awesome video!!!! What should I set my feet forward interpolation average to? Also is there an ADC filter that I can turn off in the tango 2 ???? I do not have the DJI goggles yet just to be clear

[@5zero7RC]

I believe the feed forward setting is something that is intended to be adjusted to personal preference. Personally I have never changed that from the default. I am not familiar with "DC filter" or what that would be.

[@dee1251]

Hey can you help me out with my tango 2: I am using it on my baby hawk 2 and my whoop. I just got the mark 5 and after binding it and arming it i get a weird problem; the i just nudge the throttle up and down it work fine but when i add more throttle the motors spool up very fast and when i try to bring the throttle down it doesn't slow it down. I'm forced to turn it off. And the weird thing is that it affected my other two drones in the same way, i tried to rebinding them , updating the tbs agent and copy to items to Script/tools when updating the sd card on tango 2. What the hell is wrong ? Very coincidental that this happened after binding to the new quad. What should i Do?

[@5zero7RC]

Are you sure this is new behavior? If you have air mode enabled and trying this with the props off, that is normal.

[@e_Wallaby8]

Is there any way to set up audio alarms for when the power output increases because of dynamic power?

[@5zero7RC]

I would be surprised if there was NOT a way to do that, however I have not run across any examples of how to do it. Maybe someone in the TBS Lounge on Facebook would know... facebook.com/groups/BlackSheepLOUNGE

[@jrmatosz]

So this is something I only need to do once right? I'm asking because I'm trying to bind another quad to the same tbs tango 2 I've always used, and I wanna keep the same settings I had

[@5zero7RC]

Yes, if you set up both quads the same way, with the same switches etc, you can bind to multiple receivers and everything should work as you expect.

[@dkieng]

Great video and thanks for sharing. I just got my Tango 2 Pro and I updated the firmware to 1.2x. I can't get my channel mapping to work correctly in Betaflight. I have selected AETR1234 as my channel in BF and when I move my Tango 2 Throttle stick the YAW also moves with it. Anything else I need to do to correct this issue? I have no issue with my TBS TX micro attached to the back of my Taranis X9D but I can't get the Tango 2 to work at all. Thank you in advance.

[@5zero7RC]

I had to be very careful when going through the new model wizard on the Tango 2 to get the right sticks in the right order so it would match what I wanted. You can also go into the settings for the model and change it later if you get it wrong.

[@5zero7RC]

@Brandon S In all the simulators I have used, there is a radio setup wizard you can go through that allows you to adjust which controls on the radio do what. That should allow you to match controls with what works in betaflight.

[@5zero7RC]

@Brandon S Everything is adjustable. You could modify your betaflight config so it works as expected, you could change your mapping in the tango 2. The easiest solution in my opinion would be to get betaflight and the tango 2 working as you mentioned, then when you use a simulator, go through the simulators setup wizard and have it fix the controls for you. Then you should end up with a tango 2 that works in the simulator and with betaflight.

[@dee1251]

I m currently using frysky x-lite with my mobula6. I purchased the tango 2 and the module. How do I copy the flight model to my tangl 2? or is it easier just to setup a new one?

[@5zero7RC]

Probably easier to set up a new model. Though I have never tried to copy one. I assume this video would be a good place to start: kzbin.info/www/bejne/d3qQZ4iKms-LhZI

[@ZackPatrick]

I was able to connect my DJI Hd goggles to my quad (iflight nazgul5 with caddx vista; crossfire nano rx) but my tbs tango 2 controller is giving me issues... When I try to bind it the controller never seems to pick up on it

[@5zero7RC]

Strange, if the crossfire nano was not bound before, all you should have to do is power up the Tango 2, go into bind mode, then power up the nano and they should bind. It might take a moment or two if they are not on the same firmware and it should then ask you to update the firmware on the nano.

[@ZackPatrick]

@@5zero7RC Do you think the problem could have anything to do with the fact that I accidentally started beta flight before I binded my radio and goggles? I didn't know that was the first step so to correct it I went back into beta flight and booted from my factory default saved copy (so everything should be the way it came out of the box) and then was able to successfully pair the Goggles but now still the issue of the tango 2.

[@5zero7RC]

Betaflight would be completely independent from the binding between the Tango 2 and the nano receiver. Resetting betaflight could affect seeing the movement of your sticks however. What are the lights doing on the nano? Have you looked at the crossfire manual? That might have some solutions in it for you. If all else fails, TBS has some good support so I'm sure they could get it sorted as well.

[@djdubz]

Great vid and thank you for this! By chance, do you know a way to back up Tango 2 radio settings (everything lol). e.g. Radio Channel Order, RETA, mode 1/2, Mixes (switches), Logical Switches, Special Functions (for RSSI warnings, critical, highspeed, lowspeed, etc? And if so, can you move or copy those to your other Tango 2 (for multi-bind purposes)?

[@5zero7RC]

I believe everything is stored on the memory card and you can copy the data to a new radio if needed. And TBS also has a special multi-bind function that would help if you have multiple crossfire setups.... kzbin.info/www/bejne/fovKYZqIacdjjrc

[@trevorc6793]

This info is great, thank you for doing this is such detail. I've bound my nano to the tango 2 not problem, are you going into the betaflight setup to set up a new model or the csfr part? My Tango2 is saying it's bound (as when I disconnect the lipo - it say connection lost). I don't see any movement in the rx tab in betaflight when connected via usb. the uart is set correctly, the rx in config also. Im at a loss, any help would be great . Thanks in advance

[@5zero7RC]

To create a new model, I am doing that in the menu of the Tango 2 screen. Good luck!

[@danyel3901]

I have latest version crsf 6.10 and my tango 2 v3 bound with solid green light on Nano and radio.. I can arm etc.. But I cannot see in crsf menu any Nano rx info anywhere.. Pls anyone advise why.. Or is this a simple fix.. (I do have dynamic power on and power switch off in crsf data on tango..)

[@5zero7RC]

That seems strange. I assume it should show up there if the receiver and radio are talking to each other. Maybe you need to run the "detect sensors" script in the menu?

[@olivierf.4931]

Hello! I just got the tango 2. Is there something to do on the first power on so that it does not lock to a specific mode like EU for exemple? I don't want to get stuck with a low output power as soon as I start using it :-)

[@5zero7RC]

As far as I know everything can be changed at any time, so you won't get locked into EU mode or anything like that. You can "unlock" it and configure the radio to be any mode/power level you want.

[@olivierf.4931]

@@5zero7RC great! Thanks a lot for answering! I am beginning in fpv and I struggle with some of the technology! I went high end analog and I still have a despicable image quality...

[@PatrickGuerrisi]

Thanks for this video. Just got my TBS tango 2 pro. My old radio is an Turnigy Evolution Tango. How do you check what channels everything was set to on your previous radio so you can match everything up with the tango?

[@5zero7RC]

One way to do that is look in betaflight with everything connected and you should see the bars move when you flip switches etc. That will tell you the channel each switch is on. Then you can map them the same way when setting up a new radio.

[@PatrickGuerrisi]

@@5zero7RC thanks. I'll check and write them down It had a frsky receiber in it right now I guess I'll have to de-solder that off and solder on the tbs receiver right

[@5zero7RC]

That is correct. You will want to remove the old receiver and replace it with a crossfire one. If you have a flysky receiver you can wire the crossfire in the same place. But if you have frsky receiver you might need to wire crossfire in a different location. Check your flight controller wiring diagram for details.

[@PatrickGuerrisi]

@@5zero7RC its actually flysky not frsky... just checked with the guy i bought it off

[@QuickSticks8771]

Hi there great vid !! I just received mine today and I’m charging it for the first time with a GoPro usb c cable into a wall adapter but no red light or signs of charging I plugged into the usb of the Mac using the same cable and it started charging immediately .after an hour or 2 the red light turned off After powering on I notice the max volts were 3.9 and 3 led bars short of full It also won’t accept any more charge Should I be expecting 4..2 volts and full led bars when fully charged ?? Is this normal or do I have a defective unit ?? Any advice would be appreciated.

[@5zero7RC]

I have heard others talking about this problem. I think it was on Facebook in the TBS Lounge or the Tango II group. I would reach out to TBS support and see what they say. That does not sound like proper behavior.

[@QuickSticks8771]

5zero7 RC thank you I Havnt received a reply from TBS as yet So normal is to charge to 4.2 volts is that correct ??

[@5zero7RC]

I think so, however I have not fully charged my radio in a while, but I'm pretty sure it went up to 4.2. It really should since it has a 1s lipo in there for the battery.

[@QuickSticks8771]

5zero7 RC yes my assumption too Thank you for your fast reply Hopefully hear back from TBS soon Not a great start 🤨

[@trainday]

Does this radio have better range than a tx16s with crossfire micro module thanks

[@5zero7RC]

No, it should not have better range. Though the answer depends on which version of the main board the Tango 2 has. The latest v3 board is rumored to be able to use more than 250mw of power. The crossfire micro v2 can do 1w of power output.

[@pavlosgrivas343]

Great video thanks! Been trying for days to get my D switch (or nay other one) to be the pre arm but somehow I can’t get to do it. Any quick instructions please?

[@5zero7RC]

If you power everything up and connect your flight controller to your computer and look at betaflight in the receiver section, do you see any of the AUX channels moving when you flip the switches?

[@pavlosgrivas343]

@@5zero7RC thanks I’ve sorted it out was my fault! However I can’t get my max power to go over the 25mw. I have the V3 and when I press on the 25mw it does not give me the choice to alter it. I have updated everything even downgraded just to make sure. What do you think?

[@5zero7RC]

@@pavlosgrivas343 Have you "unlocked" the radio? I bet this will help you... team-blacksheep.freshdesk.com/support/solutions/articles/4000099976-region-crossfire-locked-no-frequency-selection-and-limited-power-selection-under-general-menu

[@pavlosgrivas343]

@@5zero7RC thanks so much. I will try it and see what happens🤞🤞

[@jeffsDad]

I don't get RFMD as an option for my Logical Switches.... Is there something else I need to enable first?

[@5zero7RC]

I think you need to tell the radio to detect sensors and then it will show up.

[@5zero7RC]

Turn on the radio, press the menu button, then press the page button until you get to page 10. Scroll down to discover new sensors. Then click the scroll wheel to start discovery. After a few seconds you can click the wheel again to stop the discovery. I think that should do it.

[@jeffsDad]

@@5zero7RC Thank you! Just a fun note for anyone trying this, do make sure the quad (or at least the receiver) is on when you run Discover New Sensors! Works much better that way! 😂 From a fellow Minnesotan, I hope you get some great flights in this weekend!

[@5zero7RC]

@@jeffsDad Yeah, better get some flights in this weekend, next week looks less than ideal.

[@peterrandal8914]

ty!

[@winteriscoming4379]

hey great video. i got to the 11 minute mark where you controller movements are showed in beta flight but i am not getting this. just to confirm i have the drone connected via usb and the controlled bound with the drone but not connected directly to my laptop. when i move the drone by itself this is shown on beta flight but the controller is doing nothing - any suggestions? thanks

[@5zero7RC]

Are you sure the receiver in your drone is getting power? Does it have lights on it? Does the radio show that it is bound and connected to the receiver and showing the signal bars? The next thing to check would be to make sure you have the receiver connected to your flight controller properly, that the wires and solder connections are good, and that they are connected to the correct UART and you have betaflight configured for that UART to be your receiver.

[@winteriscoming4379]

@@5zero7RC hey thanks for the reply, yes receiver getting power and light solid green. showing that its bound up with controller. when i move the actual drone itself in beta flight the graphic model moves but when i move the joysticks i get nothing. if i had put the RX and TX the wrong way round it wouldn't bind would it? I'm questioning if that's what I've done but I'm 99% i got the wiring right and dont think it would even bind if i hadn't. And yes it shows signal bars on the controller also

[@5zero7RC]

@@winteriscoming4379 IF RX/TX are wrong, it would still bind. The receiver will bind as long as it has power. Do you have it connected to an inverted sbus UART by any chance? I'd double check the manual for your FC to make sure it is wired up correctly. The other option would be having the outputs mapped wrong on the radio.

[@winteriscoming4379]

@@5zero7RC what is an “inverted” UART? Also at about 7 minutes on your video when you go into the crossfire settings you seem to have an option for Beta flight in the settings on the controller, I am not getting this. Do I need to install beta flight software to the actual controller somehow ?

[@5zero7RC]

@@winteriscoming4379 Some F4 based flight controllers have a specific UART dedicated to FrSky receivers. FrSky receivers send a signal that is "inverted" or opposite of all other receivers. If your flight controller has this, you don't want to use that for a crossfire receiver.

[@sheapyfpv8224]

In the logical switches I don't get the RQly option in v1?

[@5zero7RC]

I feel like someone else had that issue but I can't remember the fix. Are you on the latest firmware for the tango and the built in crossfire? I remember having to scroll a lot to find them.

[@sheapyfpv8224]

@@5zero7RC yes on latest firmware. I've schroled both ways doesn't come up with that or rssi! Is there something else I need to activate. I have lq set up on channel 9.

[@sheapyfpv8224]

@@5zero7RC I think I know why I've been a dumbass and not clicked the find all sensors that's probably why?!!

[@5zero7RC]

@@sheapyfpv8224 Ah, yes, I bet that is it! Pretty sure that was the fix for the other person that had that issue as well.

[@dofpvkorea_dk193]

Please help me. Tango 2 controller's got a sd card warning. Description Part 12:42 to go to Settings Multi-rotor Settings I can't do it I don't know why the sd card alert comes up.

[@5zero7RC]

What exactly does the SD card alert say? I would check with the TBS Tango II facebook group or reach out to the TBS support. facebook.com/groups/553173978745368

[@dofpvkorea_dk193]

@@5zero7RC I can't set it up select model type, The multi-button is not working.

[@dofpvkorea_dk193]

@@5zero7RC The key value fluctuates even if you continue setting up the calibration. Is there a way to stabilize it?

[@dofpvkorea_dk193]

@@5zero7RC Thank you for your answer.

[@KazanskyAlex]

Is this radio works only for quads ? Or it could setup with hellicopters and plains ?

[@5zero7RC]

It is primarily designed for drones, but can be used for other things. It does not have a lot of switches and there are no trim buttons ( though you can trim through the scroll wheel ) so you might find other radios are better for a plane or heli. I only use it with drones so I can't fully answer that.

[@KazanskyAlex]

@@5zero7RC How far you can fly with built in Crossfire module ?

[@5zero7RC]

@@KazanskyAlex I don't know the actual limit, but it is farther than I need to fly :) I'm sure it can go for many miles if you have the antenna positioned well on the drone.

[@PatrickGuerrisi]

I am going insane here. My radio I think is binded but it keeps loosing connection saying "RF Signal Critical, Telemetry Lost" sometimes it then says Telemetry recovered. I am standing right next to it and I also tried moving away a bit. I have updated firmware to latest on both

[@5zero7RC]

Yeah, you should not be getting that message. Are your antennas connected well? Have you double checked that you did all the same things I did in this video to set it up? If you need more help, check out the Tango 2 facebook group or reach out to TBS support. Should be able to get it sorted for you.

[@PatrickGuerrisi]

@@5zero7RC I worked it out. It was the latest beta firmware I installed I was following Josh Bardwels setup and be said to get the latest beta firmware because TBS are very reliable when testing I downgraded to the latest official release and now it.binds and connect's without issue

[@5zero7RC]

@@PatrickGuerrisi Glad to hear it is working. Also very odd that the latest firmware caused that issue.

[@PatrickGuerrisi]

@@5zero7RC well it was their latest "beta" version I could try it again but scared I'll go through more.crap

[@cervellimatteo]

I have a problem, my tango 2 see the receiver but this one have green flash light and I don’t see it in betaflight... in tango 2 crossfire menu i don’t have the betaflight voice in the list but I see the nano receiver tx menu 🧐

[@5zero7RC]

My guess is that you have to manually re-bind the receiver. But check this crossfire manual and see what the led light codes mean. www.team-blacksheep.com/tbs-tango2-manual.pdf

[@cervellimatteo]

@@5zero7RC the tango led is solid green but receiver led is slow blinking green... in tango 2 display I see the signal value scale... and tango voice give me a feedback for connected signal.

[@5zero7RC]

Sorry, wrong manual. Yes, check the crossfire manual (www.team-blacksheep.com/tbs-crossfire-manual.pdf). Slow green blink means receiver is in binding mode, fast green blinking means receiver bootloader active or firmware upgrade running. Green flashing means Diversity RX is in Find-mode (up to 1 min. delay between flashing). Double green blinking means Authentication error. Rebind your receiver. So basically you need to rebind or update the firmware on the crossfire receiver.

[@cervellimatteo]

@@5zero7RC I update the tango 2 to latest beta firmware... and the receiver automatically update too.. I rebind and now I have the solid green led in both radio and receiver. And I see the joystick inputs in beta flight!! 👍👍

[@lowkeyswe2260]

Hi everybody, does anybody know what “waiting for Crossfire de...” means ? (I think the text is to long to fit in the screen) it’s on the crossfire menu setup page, thank y’all in advance

[@5zero7RC]

Google wants to autocomplete that to say, "waiting for Crossfire devices". If that is true, this might help: team-blacksheep.freshdesk.com/support/solutions/articles/4000134180--crossfire-waiting-for-devices Otherwise I would contact TBS support and see what they have to say.

[@5zero7RC]

Did you get your issue fixed? I saw a similar post on Facebook today that explained how to fix it if you still need help. Something about the tango 2 was configured to expect an external crossfire module, once they changed that setting it was all good.