TBS Tango 2 set-up guide instructions

[@csmarkham]

I wish I’d found this a year ago Feb when I got the Tango 2 and my first bind-n-fly drone. I was so excited to try FPV. ‘Cept nothing comes with any instructions!! So it mostly sat in a box, though I did figure out hoe to connect it to a simulator. So an expensive game pad. A year and months later, because of this video, I’m finally bound to my quad with controls that work. Thank you.

[@bencartwright9359]

You helped me a lot in this video - one thing I didn't realize was that you needed to calibrate the sticks first before they would register a signal. It was so frustrating. You helped me out - thank you very much

[@Datfpv]

Glad it helped!

[@RGMGFitness]

Thank you! Finally exactly what I was looking for...Can't tell you how many other videos I've looked at but steps were missing (or just unclear of Menu they were in). Finally, all came together with this video. 27K views on this video...clearly, others are finding it EXTREMELY helpful as well. Thank you again!

[@Datfpv]

Thanks man makes all worth it reading comments like this 👍 remember to subscribe

[@mo1tard743]

Thank you for this video, Guys like you make it possible for newbies like me to get started. Wouldn't a detailed user manual be great to have? The device manufacturers have outsourced their responsibility to provide this information to a small army of youtubers.

[@Datfpv]

no worries, glad it all helped to out.

[@dangerous8333]

TBS has had a manual since this was released.

[@csmarkham]

The manual says what things are, not what they do, not how to use it. It is only helpful if you’re experienced, coming from another controller.

[@pieproducer]

Best tango set up video on the internet.the other ones i looked at were slap and dash,useless basically.Good to see someone doing things thoroughly with competence in this day and age.thanks alot.

[@gargolaconrad3188]

Thank You so much!!! I at least got my buttons set up, thanks to you and this video. I can't get my Tango 2 to bind with my TBS Crossfire Diversity Nano yet, so as soon as I get that to work; I'll come back to this video and finish up with the BETAFLIGHT. Thank You again VERY VERY MUCH!!!

[@Datfpv]

you're welcome man no worries, glad it all helps

[@tulzii1088]

Thank you SOOOoooo much !!!! I had so many video watched, and googled. Finally you saved me and mu quad ! Everythings done correcly. Thank you again !

[@Datfpv]

You are welcome! - smash that subscribe!!!

[@babyzfpv1234]

This is a great video if you are using mode one. That is if you are living somewhere outside of the US or other regions that are predominantly mode two.

[@slicksix8892]

Hopefully this will sort my range issue I have with my T2👍

[@peterkortvel]

Explaining at the beginning what you are about to do and what is it for would be great. There are beginners out there :)

[@dreamingorca]

Thanks, this concise, all-in-one-place video saved me a lot of tiime and hassle!

[@Datfpv]

Glad it helped!

[@andrea3v]

Great video and explanation. Just what I (and everyone with a Tango 2) needed

[@Datfpv]

glad it helped! thanks

[@dsmith4553]

Great Video saved me a few headaches

[@Datfpv]

glad it helped man, theres the LQ / RSSI vid as well if that will help you out: kzbin.info/www/bejne/h5CUmXSBoZp3aNU

[@davidcanole3758]

Finally got everything up and running on it I even added GPS rescue piggybacked it with the beeper on middle setting snowing pretty hard here today so I couldn't bring it outside to see if it will hook up to satellites did it from my sliding glass door but nothing happened hopefully it's not another challenge thanks again for all your help I'm sure I'll be bothering you soon if you don't mind

[@davidcanole3758]

So like I said all switches and buttons and sticks of working in beta flight took outside picked up 17 satellites so that was OK want to fire up the motors and they didn't go on when I was in bed a flight went into motors turned on the switch slid the ruler up a little bit motors went on but they were controlled by the arm switch so I don't know what's going on why won't my motors fire up to fly sorry to bother you again

[@gerritjustingrone1370]

echt geile Mann

[@thelordyno]

thanks a lot dude. I bought a second hand tx and couldnt get my head around the switchers as the "rockers" only gave me a 2-pos. new mode, new all!

[@Datfpv]

Glad I could help! theres a thanks button if you feel like making a donation!

[@nilsherrmann2815]

Awesome Video you helped with everything 👍

[@AdamVenturesTravel]

so helpful, thanks for putting this video together!

[@Datfpv]

Glad it was helpful!

[@fpvkalle6322]

Thank you from Germany, great Video 😊👍👍👍

[@basheepy4351]

Getting one soon hopefully everything goes well with it don’t want it to end up not working

[@Datfpv]

its a great controller, good luck!

[@merrritfpv6417]

this video help me a lot! thank you mr. !

[@MatthewRumble]

my tango 2 still doesn't make any of the sliders in betaflight move

[@ShaneInseine]

This is a brilliant set-up guide. I got all the way to the end but then (this is 2 years after you posted this) the interface looks different and I can't do the final arming to make the props turn. After I select "I understand the risks," I can make the props spin and control them with the software master slider but not with the TBS Tango II. I'm sure I'm missing one simple but important control or activation switch but I can't find anything.

[@KILBY899]

Thank you very much mate

[@Miguaelable]

Datfpv thank you so much man!!

[@Datfpv]

glad it helped, remember to subscribe! thanks

[@Miguaelable]

@@Datfpv i sent you an email

[@michaelrios1785]

thank you for thiss video, it helped out so much but i am still not able to arm the drone and test out the motors. any idea what it could be that i missed or am doing wrong? thank you for your help.

[@FPVFRASHA]

thank you that is everything i need to be able to setup my iflight bnf nazgul evoque5 v2 and my tbs tango 2 but i need to know 1 more thing.... i need to know how to setup my gps that come on the drone any help would be much appreciated whether its directing me to a video that will show me how to do it or if you have a video i could watch to set it up? :)

[@chrismillersrcfamily]

I can’t wait to get this controller. 👍🏼👍🏼

[@vincentcaizergues2802]

Merci pour cette vidéo très instructive

[@Datfpv]

you're welcome! thanks

[@Viral3027]

My throttle and is t he other joy stick on for my geprc mark 5

[@jl4072]

thanks

[@Datfpv]

You're welcome! remember to subscribe, thanks

[@LukeMaximoBell1]

Thanks for the video! I don’t understand why you need to set them on the TX too? Can you not just set it in Betaflight?

[@Datfpv]

all I know is the radio comunicates with the quad, and you need to tell the controller and the quad how they are doing that, and this process of setting up switches alows that to happen.

[@edrone_]

In order for betaflight to see the switches available they have to be set on the radio otherwise betaflight won't see the outputs from your radio

[@LukeMaximoBell1]

@@edrone_ I didn't set them on the radio and Betaflight saw them fine 🤷🏻‍♂️

[@edrone_]

@@LukeMaximoBell1 the tbs tango 2 has some of the outputs already set from the factory

[@pky8tch]

Great Video! I have a problem. I have cinewhoop ( 39g Eachine Cinefun 1S 75mm CRAZYBEEX) setup completed but the quad wont arm. I type STATUS in the CLI tab in betaflight and there are no arming flags. I can see movement of the motor meters on the motor tab in betaflight. Also when I press the button that is bound to beeper it doesn't beep. I can see In the modes tab that it is configured correctly

[@danyel3901]

Very good.. Where is your video for Receiver tab on BF or tango 2 mid and end points adjustments?? Thanks

[@davidcanole3758]

When I do the first steps and shot press wheel so switch icon os blinking than hit the switch I want they are not changing....and the did before I am just changing a few from previous set up with you....any idea's

[@Datfpv]

hey - urrr hard to say, you def got the 'source' blinking then press the button you want, it should change? - you can roll the wheel and it will change as well if you know the switch you want. Also try it in inputs and mixer... and then just try setting up a new model completely.

[@davidcanole3758]

@@Datfpv will a factory reset in tango 2 put me back to square one

[@dillondalton6452]

Great video, thanks for the help

[@Datfpv]

happy it helped mate, remember to subscribe, thanks

[@albertomancini111]

Hi!! Whats the difference between input and MIXES Page ?

[@wexer82]

Cheers!

[@h-dawg969]

Does setting which buttons for which action via the controller (like in the start if this video) override the settings chosen in Betaflight?

[@joloaseniro]

i got my drone all set up and ready to fly but I got one question about the throttle stick, like if i throttle all the way the down the motors speed up like I throttle up and if I put halfway it’s slows down, I don’t know if it’s good thing or that’s how fpv drone throttle works?

[@E46_M3]

How can I use the F and E buttons on the back of the controller? I don't see any reaction on betaflight on the receiver page when I press those, but all the other inputs show up and work

[@jeremygrossman5037]

hi, i have followed all ur steps to setup my new iflight bumblebee v3, im having trouble arming the quad still the motors spin when i drag up the volume by laptop but not when i press my arming switch? hope you can help

[@myfpvshots]

I have 2 fpv quads and bounded one by one. I used the first quad and changed to the second one. Do I need to rebind the second quad again?

[@fpvwithme]

It's definitely different that dji. When I plug into betaflight, it will recognize everything and have the same interface automatically?

[@stewpidazole]

Very nicely done.

[@Datfpv]

thanks man, glad you liked!

[@stewpidazole]

@@Datfpv Do you know of a video that shows how to set the end points on the Tango 2 ?

[@Datfpv]

no.. but search for endpoint, its pretty much the same on all opentx radios.

[@stewpidazole]

@@Datfpv excellent ty

[@michalpesek1397]

Hey there! I need some help with my Tango II settings. When I push the pitch or roll fully on my remote controller, my drone doesn't achieve the full range of motion. It won't do proper dives or flips; instead, it responds slowly and with limited movement. I've followed various setup guides and checked my remote controller settings, but I still can't figure out what's wrong. Interestingly, when I test the controller in Betaflight's Receiver menu, everything appears to be working fine. Any ideas on what might be causing this issue?

[@TheMetalSandman]

So back when I used to use Spektrum radio, I could set up dual rates? Like I can change the sensitivity of roll, pitch, and yaw all at once, like maybe to 85%, then 75% or something, and set that on 1 of my switches. How do I do this with the TBS tango II? I was planning to use the 3-position switches on it (B or C) for this, seems not possible. How?

[@Datfpv]

I don't see why this wouldn't work, its just setting an aux switch up: kzbin.info/www/bejne/fGfbhY2hdsujiJI

[@TheMetalSandman]

@@Datfpv Thanks so much Datfpv!! This totally works for the Tango II! thanks a million, and of course to Joshua as well as always :P

[@dzeteny282]

I have a problem when I put on SF to prearm I can't use it on betaflight. Do someone know why?

[@aarondodson1261]

We’re do you get those joysticks

[@cesun5452]

Very Helpful! Is there a way to quickly copy settings for a second drone? I assume you can make a copy of the model in tango 2 and go to menu to bind the second drone so it is registered against the second model. But what about Betaflight settings regarding the switches? Thanks!

[@sncat]

the display is poorly visible. Use a polarizing filter to record video without glare.

[@jonathanrau4676]

Can't see what he is doing ..

[@FriedemannHenning]

How can I add the LED to turn it on and off?

[@gcdevicegc6103]

Hi, why not in betaflight changed the buttons modes? It's easy! I didn't mess around in the remote, only in BF

[@ak-lk2nq]

Hey.. i have brightness at 100 % but outside cants see anything without having to cover screen to be able to see alittle.. any solution ? Thank you

[@Datfpv]

no mate, this is just one of those things :(

[@sheapyfpv8224]

Great video what's difference between amber light and green. Mines always amber but I see in tbs manual it says green light is a solid link??

[@Datfpv]

amber light is no link, green solid is bound to the receiver

[@RYVENANT]

What are those stick ends? The grand lotus ones?

[@Datfpv]

hey yes they are frsky grand lotus 'm3' stick ends, love them, remember to subscribe, thanks

[@albertocostell4449]

Hello men, your video help me 3 times now 😂😂 but I have a problem and I can’t find the calibrate sticks bottom. I was on a film job and the calibration started alone, I did it wrong cause I didn’t see it and now I can’t even start the dron cause the sticks are quite bad . I see a lot of videos but they have 6 menus and they find it on the hardware page, but we have 11 menus 😅

[@frictio]

Hey DatFPV. I followed your instructions step-by-step. Thank you very much. I have two models set up in my Tango2. One for flying and one for velocidrone. Can I disable the radio tx completely for the sim model. Because everytime I switch the Tango on, I have to confirm that radio isn't required. Before that my eardrums are blown through my wireless headphones picking up all that noise.

[@Datfpv]

Hi - glad it helped you connect / bind and sort it all out, great to hear - I think there is away to switch the thing off like you ask, but off the top of my head not sure...! soz.

[@davidcanole3758]

So after carefully setting my radio up exactly like you did both in input and mixers I go into BF sticks work great but when I push D button which should be arm the beeper goes off and it's mode light goes on but on the arm slide the little light goes on in the arm.....and when I push B switch the gps rescue light goes on the slide bar but the mode light doesn't light up ....turtle works good....D button does nothing.....and like I said it's all set up like yours

[@Datfpv]

Hey - so when you are in the modes tab in BF you have only set up the switches that you have added in the tango 2 controller? so if its like mine I only have beeper, arm, turtle - thats it. if there are any other switches you need you need to add them the same way in the controller. If you don't need more switches you need to remove the unwanted ones from the mode tab. So my controller has only 3 switches set up in it if you want more switches you need to add more in the controller - just repeat my tutorial for more switches. does that make sense?

[@davidcanole3758]

@@Datfpv yes I set up the same switches... arm,beeper, mode and turtle.... turtle is the only one working right in being a flight when I push the D button nothing happens in BF..... I push the E button both arm and horizon mode light up.... when I push the B switch in BF it's controlling the GPS rescue function.....I have checked my settings many times and they are exactly like yours...... I have a short video if I knew how to send it to you.... i've noticed my auxiliaries are different than yours

[@Datfpv]

to me it sounds like you have too many set up in the modes tab. DELETE the ones you don't want? - its not set like mine because I only have 3 in the MODES TAB IN BETAFLIGHT. - check the modes tab - there is a small 'x' you can delete the ones that shouldn't be there - if its set like mine where did gps come from??

[@davidcanole3758]

@@Datfpv sent you vids on your FB messanger

[@davidcanole3758]

@@Datfpv I deleted the GPS rescue from the mods tabs but why isn't the radio controlling the proper mods

[@PatrickGuerrisi]

sorry me again. I have have a problem now where when I roll right its slow and roll left its super quick. I have calibrated my sticks about 3 times and it wont fix this. Some people have said to adjust my trims but I dont really know how? I know how to get into the trim menu but not really sure what I am supposed to do?

[@Datfpv]

you want to follow something like this, its all the same process: kzbin.info/www/bejne/pHXWf4qQnN2grZY

[@amster1dam1]

Do you have a bind vid?

[@Datfpv]

this one does the bind: kzbin.info/www/bejne/a6TTqoeDopKBfrM

[@PatrickGuerrisi]

hi I am back here. I am trying to set a failsafe button to button E. I have done the setup on this video but the part where I am having trouble is getting betaflight to recognise it. When I press the E button the modes tab in betaflght doesnt show it knows I am pressing it

[@ELValenin]

This would be the ultimate transmitter for me - IF it wasn't so expensive :( One day I'll get one!!!

[@Datfpv]

crossfire just gives you that confidence as well that you won't just fall out the sky from signal loss ! and the form is the best

[@RYVENANT]

Worth every penny, you don't NEED the pro version, I think the regular one is only $160

[@maksym6891]

Hello guys, I want to buy a Cinelog 35 v2 drone and a Tango 2 remote control (I read that it works on TBS Crossfire), this means that I need to buy the drone with the TBS Nano RX option to use it in conjunction. If I buy a drone with the ELRS 2.4 option, will it not work with this remote control? I looked on Google at what frequency this remote control operates and it is 868 MHz (Europe); 915MHz (USA, Asia, Australia). Are there any restrictions on the use of this frequency in Canada?

[@SoloPsychoFPV]

Hi, can you help me, when I get to 3.18 on Ur video my button mapping (exactly the same as yours) doesn't work the button will not register, what do I need to do?

[@mo1tard743]

did you put flip over on aux 4? I can't see which one it is in the video. it would have to be something other than Aux 4 because AUX 4 is assigned to RSSI, correct:? This is so bloody frustrating.

[@willldn]

I’ve set up a model on my tango2, and bound the tango with my drone, but when I plug into beta flight, none of the sticks or switches get any response at all in bf

[@dee1251]

Hey can you help me out with my tango 2: I am using it on my baby hawk 2 and my whoop. I just got the mark 5 and after binding it and arming it i get a weird problem; the i just nudge the throttle up and down it work fine but when i add more throttle the motors spool up very fast and when i try to bring the throttle down it doesn't slow it down. I'm forced to turn it off. And the weird thing is that it affected my other two drones in the same way, i tried to rebinding them , updating the tbs agent and copy to items to Script/tools when updating the sd card on tango 2. What the hell is wrong ? Very coincidental that this happened after binding to the new quad. What should i Do?

[@dee1251]

hey i m new to the hd world. I just purchased the babyhawk 2 hd which im waiting for to arrive and i bought the dji goggles v1 already. I have been flying tinny whoop Eachine AE65 - crossfire using my aomway v1 goggles and tango 2. Is there a way i could fly my tiny whoop using the dji goggles somehow instead of the aomways?

[@Datfpv]

hey mate, yes you need a adaptor, I use this one, remember to subscribe! thanks kzbin.info/www/bejne/kKuooWyqpbCVja8

[@THEVOL]

Is there a faster way to set this up with it connected to a computer? I love this radio for a lot of things but the setup is horribly complicated.

[@farzadostovarzadeh]

Hello, I set up button D for the arm but it doesn't work. In Betaflight when I press it the arm turns red but when I go to the motor section and toggle "understand" on and press the D nothing happens. When I disconnect the drone and press D nothing happens.

[@monacocross4241]

arm in tango controller you make digering , when bution puch inside in tango is - on , you make from off to on = on lol if inside puch bution in tango is on

[@SuburbanTrash]

My RC is bound to my quad but there is no inputs on Betaflight. Its not a damage in cables, since when i first connected it, it worked fine. Now it wont work at all. I cant seem to find the reason. Any ideas?

[@dmtcinema2989]

Hi I'm having issues with it syncing up with betaflight. I plug the drone into the pc and it says it's connected on Betaflight config app but when I move the sticks nothing happens. Any ideas?

[@camhed78]

Hey I can't get beta flight on my laptop screen, all it does is give me a message that says driver unknown and won't boot. Any ideas or suggestions? Thanks

hello, how you bind the Tango with a drone? I lost when you start whit a betaflight

[@Datfpv]

most of my set-up vids show how to bund the tango 2 - you must have a crossfire reciever in your quad though... kzbin.info/www/bejne/qYKXqZ-fetSjfKc the binding is pretty easy with crossfire.

[@turbomaker4]

very helpfull but just dont work for me i try 135 time to create a model that the throtle will be the throtle stick

[@PatrickGuerrisi]

hi, How do I change current model inputs? My throttle is wrong. I only know how to do it when doing a new model

[@Datfpv]

this should sort you out: kzbin.info/www/bejne/bYu4lmCpeJygo7c

[@HntrCmp]

So I have only Apple devices and I’m trying to connect my tango to my 2020 MacBook Pro Literally betaflight and blheli and everything will not work on this Mac because it’s too new I guess there is some issue with newer Mac software being compatible with fpv stuff in general I’m wondering if there is some driver for this issue Or something I can’t be the only one I just want to fly a sim online with my friends Any help on this would be appreciated

[@michaelhulas9801]

Hey Dat, great explination, thanks. Any idea what might cause the quad to want to immediatly fly hard right at arming. I had no issues with my TX16s and CRSF module, for some reason i need full left trim and i cant even raise the throttle a hair before the motors spool up and want to go to the moon. I changed nothing, it happens to both of my CRSF enabled quads. im totally stumped, any ideas? anyhelp would be really appreciated. Thanks.

[@Datfpv]

have you looked at the end points of your sticks in betaflight ? on the receiver tab the colour bars should be steady - if they are off then your quad will drift - I / everyone at some point will need to adjust end points.

[@Datfpv]

kzbin.info/www/bejne/pHXWf4qQnN2grZY

[@angrypepper3325]

@@Datfpv Thanks DAT, I’ll check it out.

[@michaelhulas9801]

@@Datfpv Of all things, It was the stick calibration... I watched the numbers in the receiver tab in BetaFlight while moving the throttle stick up and down and noticed the yaw numbers moving up at throttle high and throttle idle, and the 3-D model picture of the quad would roll to right at idle and max throttle. I recalibrated the sticks and all was normal again. Lesson learned.

[@raleighday]

Is this for mode 2 radio settings?

[@Datfpv]

yes mode 2 - be the same really more or less for other modes...

[@shivam-c7e8t]

Sir, I need your help to set up my TBS Tango 2 Pro RC. I encountered some issues with the RC, so I performed a factory reset and then attempted to update to the latest version. However, during the update process, my laptop lost internet connection, and the update was not completed. Now, the RC is displaying a slow updating sign, but none of its functions are responsive. What steps can I take to resolve this issue?

[@smokinjoe1256]

i need help...do you know how to scale the sticktravel ? i reach -100/+100 at about 1mm from center. have you any idea how i can fix this?

[@whereverimayroam74]

If this is a true setup video should you be assuming that I have a bound quad? I just took this out of the box. It can't be bound to anything. Now I dig for another video.

[@Datfpv]

I guess I do pressure views view my channel, crossfire is all I use and the binding is pretty much on all my build vides: kzbin.info/www/bejne/a6TTqoeDopKBfrM

[@1337Bez]

Quick question, I have the betafpv Lite radio 2 and I was just about to upgrade to a TX16S because the tango2 doesn't support tracer as far as I know, can you confirm it doesn't work with tracer?

[@ValFPV]

I think you can attach a module bay to the tango 2 and then you can put in a tracer module... Not sure though....

[@Datfpv]

hey man, this is what I know... the tango 2 can be moded with a bay on the back and you can insert the nano tracer TX into it that bay - but you obviously have to do the work / alterations to the tango 2, unless you can get hold of one already done?

[@1337Bez]

Yeah I know that the tango v2 has the ability to take the external bay but it seems a waste of money to buy a Tango2 and then add tracer to it. Like paying twice for something. At least If I get the TX16S it comes with multi protocols built in so I can buzz with my whoops all in one radio. Just annoyed about the bulky form factor, would much rather the joypad style radio.

[@Datfpv]

thats why you have the tango 2 and do the mod... or keep the betalite for whoops and stuff... I wouldn't have the t18, 12, 16 radiomaster, q7 taranis etc etc they are all too big, just not what its about for me.

[@1337Bez]

@@Datfpv that's all very true, my original plan was just the Tango2 but I have been listening to too many people talking about how limited I would be, AAAHHHHHHH! THE VOICES, THEY WONT STOP!!!! 😂 I'll have to give it a week or two before I jump into anything

[@TheMetalSandman]

Hi. . Is there a way to use the Diamond Antenna or just the regular Immortal-T with the Tango 2 Pro? Meaning like how do I take off (if possible) that stock antenna to use the other antennas instead? :P

[@Datfpv]

Hey - yes I'm pretty sure you can change out the antenna on them, I haven't done it myself though... remember to subscribe! thanks

[@TheMetalSandman]

@@Datfpv Thanks, but could you maybe make a how to video? or at least point me somewhere that shows how to do this, please. . and yes, I will subscribes and I've already liked the video, thanks for at least replying

[@abnormallynormal8823]

@@TheMetalSandman you just take the radio apart and remove the antenna. Replace it with a U.FL to SMA whip and close her back up

[@TheMetalSandman]

@@abnormallynormal8823 Uh ok, that's obvious though :p, More specifically, "how do you take the radio apart?" (without damaging it), "how do you remove the antenna?" "what do you mean replace it with u.fl to SMA?" I'm awful with taking things apart, something always goes wrong or breaks. That's why I'd rather watch and follow along with the process.

[@shamieldrones6867]

Hey I’m having trouble I’ve done the setup I’m bound (green solid) ive basically checked everything that i can think of Tx rx wires flashed FC updated the radio and nano rx I have the right protocol selected serial rx on right uart selected AETR1234 mapping but nooo stick input from the tango still , what video were you referring to for further troubleshooting , i need to see that thanks !

[@Datfpv]

Hi - I think this maybe down to a setting in the configuration tab of betaflight - SO in betaflight select the 'configuration' tab on the left - scroll down to the areaa that says 'Receiver' there should be 2 dropdown menus, the top one should be in 'serial-based receiver (SPKSAT, SBUS, SUMD)' the second dropdown underneath should be 'CRSF' - thats crossfire - this should solve your problem.

[@Datfpv]

and this vid is if you have the sticks in the wrong locations: kzbin.info/www/bejne/bYu4lmCpeJygo7c

[@shamieldrones6867]

I’ve done the setup in beta flight still no movement

[@Datfpv]

ok - in ports - have you set the UART you have used - turned on 'serial Rx' - if crossfire is on TX3 / RX3 - its UART3 - tx/rx2 - its UART2 etc etc - try that

[@shamieldrones6867]

I have it on uart 1 I’m using the T motor F7 mini serial rx is on

[@michaelbryant3643]

Is that the new screen v3 version?

[@Datfpv]

no - but shouldn't make any diff

[@kumardeepam]

In betaflight my sticks are swapped, the throttle is doing pitch and vice versa, how to change it?

[@Datfpv]

this one mate: kzbin.info/www/bejne/bYu4lmCpeJygo7c

[@AquariusAquaCare]

I had a local guy make a custom quad for me. I’m trying to figure out how to get the drone to go into full acro mode. Also, those sticks are sick! How can I get my hands on some?!

[@Datfpv]

you need to remove the horizon and stability settings in the modes tab in betaflight

[@Datfpv]

stickends are the grand lotus (m3 for tango 2): kzbin.info?event=video_description&redir_token=QUFFLUhqbVh1ei1PMnQtRFJnTWI0TVlMcWRTSkJsY01tZ3xBQ3Jtc0trazY4OWdEODREVExHVnREU2ZfOGREYWNuUnBSTVBaNXAxSlpTcHJ4RHN0VnlhQXlRY3EycnFOaTdmUGo5bllmdmctNWtEbUx1cGtLUzlfWTZCQjNtbmUzQWFZTTFuQS1peEJWNTE1RjFtUEN1eWZUUQ&q=https%3A%2F%2Fwww.banggood.com%2F2-PCS-Original-Frsky-Transmitter-M3-CNC-Aluminum-Gimbal-Stick-Ends-for-Frsky-X9E-X12S-or-M9-Gimbal-X12S-for-RC-Drone-FPV-Racing-p-1162867.html%3Fp%3DLG060056157431202101%26custlinkid%3D1413593

[@spacemonkey986]

This video is supposed to be a complete setup of a new tango 2 so how would it be bound?

[@Datfpv]

Check out any of my build videos

[@checkeredflagfilms]

really difficult to discern the text on the T2...looks blown out...perhaps stop down a bit might make it more readable.

[@tulzii1088]

I have another question. How to change vtx power from tango 2?

[@Datfpv]

thank you!

[@mauricevieren]

I only have 11 menu pages on my tango 2… do you know how i can get the crossfire setup-menu?

[@dreamingorca]

I couldnt find it either then I connected it up to my computer and ran the TBS Agent X program and found it there! Nice of TBS to update the Firmware then NOT add in the notes that the only way to access the Crossfire Menu is through their desktop software!! They need to update their online instruction manual for this radio as it is now well obsolete after recent updates.

[@johnboy7005]

Hiya mate I have the tbs tango 2 I was updating it and then something happened and now it's just saying please update crossfire any chance you could help please 🙏🏼 🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼

[@JB-cq2wo]

hi my yah and roll are switched now ? help

[@Datfpv]

try this: kzbin.info/www/bejne/bYu4lmCpeJygo7c

[@ZyaLuke]

I set up everything the way you did and then I followed your instructions and set up GPS RESCUE, I set it up on button "A" but in betaflight when I add range it doesn't recognize that button. What am I doing wrong?

[@ZyaLuke]

Also, my arm button works in the "Modes" panel but when I go to motors and click that I understand the risk, then nothing happens, motors do not turn on at all.

[@Datfpv]

if it doesn't arm make sure you do have your sticks in the corrcet place, throttle is throttle and yaw is yaw etc etc: kzbin.info/www/bejne/bYu4lmCpeJygo7c

[@Datfpv]

you may of run out of channels... the tango may be set to 8 channels 4 are used for sticks and the others for buttons - and if you are using the other 4 and you need a 5th ? then you are out of channels... you can change it to 12 in the tango 2

[@ZyaLuke]

@@Datfpv ah, I'll have to figure out how to change it to 12 or swap out turtle mode. I already watched that video and got my sticks right and like I said in Modes it shows it working but in Motors it doesn't, I can manually raise those bars and my motors will start going but hitting arm doesn't seem to do anything and hitting the throttle stick does nothing also. I've spent the last 4 nights, multiple videos, and multiple emails with TBS to finally get my Tango 2 to bind with my Chimera7 and now I've got one last issue thats keeping me from flying! Lol

[@ZyaLuke]

kzbin.info/www/bejne/qp3JqXaFpZxjbrM

[@dee1251]

I have a question when I tried to create a new model this error comes up scrip memory allocating panic error. what does this mean? I have been duplicating models and erasing them is this because of that?

[@Datfpv]

never really heard of it to be honest, but it dies sound like a memory issue, maybe a firmware update might help / sort it though? only a guess.

[@abisekhar]

Can you map more than 8 channels with the Tango?

[@Datfpv]

yes you can.!

[@davidcanole3758]

That's what I figured...switch or wheeling method not working.... it did before .....you think I should factory reset....or just do mixers and inputs

[@Datfpv]

if you are setting upi switches you should be doing in it the mixer and inputs anyway? - if its not working in them it sounds a little odd, and you say it did work before is even odder... FIRST I would just create a new model and go through the process again, if that doesn't work as long as you're not going to loose too many other models you have programmed in, yeah do a reset... if that don't work sounds like a send back :(

[@Datfpv]

have you done any firmware updates out of interest recently?

[@davidcanole3758]

@@Datfpv yes when I first got did the Joshua bardwell update

[@Datfpv]

and then it stopped working? did it work ok before update?

[@davidcanole3758]

@@Datfpv when I first got it did update right away then found your video and set up a few models( with no problems)than went back to change a few switches that's when it started