How to spray sealer and why?

IF YOU GET ANYTHING FROM MY VIDEOS PLEASE BUY SOME HOODIES,T-SHIRTS AND MORE HERE! www.motivatedpainters.com
Watch some white pearl tips here!
• White Pearls & MORE! m...
SUPPORT THE CHANNEL!
www.motivatedpainters.com
FOR SHIRTS! www.motivatedpainters.com/store
thank you !!!
INSTAGRAM: / motivatedpainters
MOTIVATED PAINTERS AS IS WOULDN'T BE POSSIBLE WITHOUT www.buddscolli... which is where I have worked for a decade now!
KZbin CHANNEL: www.youtube.co...
SNAPCHT: gabriel.merino / gabriel.merino
LINKEDIN: / gabriel-merino-70488384
TWITTER: ga...

[@mrmuskey5202]

Some Sealers like to leave a slightly textured finish. I like to use a 1.2 and speed up my arm movement, and apply a 'closed thin coat’ but mostly covered. Keep your overspray under control and try not to go back and respray an area you miss, the overspray is heavy and does'nt always melt in easily, so try not to miss as you go. Most sealers are a 15-20min flash, spray your sealer then go mix your colour. You mentioned a cushion, I happen to know at a Honda plant for example, they apply an additional coat of ‘Cushion' along the front, foot of the hood and 8’ along the bottom of the vehicle. Without Sealer on new parts it stone chips much more easily. Also, sealer can be your friend, cause it can eliminate prepping to a real fine paper. If applying sealer to a primed bumper for example, you can sand to 4-500 grt and spray it silver, without sand scratches . Also, aways think of the customer, it will make you a better painter! Good Video!

[@garypostell5268]

I like this guy he’s got good character and knows that our Father in heaven has all the Glory 🙏💯👍🇺🇸

[@johnmckell4362]

Sealer fills the tiny pits and holes left over from sanding...and as the name indicates it seals the substrate...Good video

[@cali_cal]

What you recommend?

[@brucebartlett1950]

Getting alot of tips own a small collision repair shop in Dallas like your videos good job..

[@MOTIVATEDPAINTERS]

That's awesome!!! I have a special deal on my paint suits for a box of 20 for shops! Lets me know if you are interested!

[@tibass8]

Man you are helping me a lot with your video...please keep doing that!!! Cheers

[@MOTIVATEDPAINTERS]

Awesome to hear that!!!

[@dekorokone]

Thanks again. I used slow reluctantly but it made a world of difference. Was having trouble getting white sealer to go on even with medium. In Texas. Med is more like fast. 👍

[@djentleman7]

Nice content with sealer, I love using it and in some cases you are supposed to use it like raw bumpers...For whites try doing 2 medium coats to get full coverage, at least that's what I do for Standox Urethane...also 5-10 minutes isn't really accurate, at least not for Standox solvents. It's supposed to flash 15-20 minutes between coats to allow it to fully breathe

[@zanaga1901]

Just got some Naaon 2k sealer at Auto Value store today it costed 199 with tax for a gallon and the medium hardner. I haven't went to Auto Value a lot but they have a lot more paint, hardners, and other auto products. I will be using my Harbor Freight 1.4 gun on my small 26 gallon air compressor to put the sealer on. In the future gonna get the Fuji Q5 platinum turbine I saw it online for a cheap price.

[@rogerteal6727]

Great video brother and thank you so much for your knowledge and wisdom! 👍

[@ronniewalters4084]

Awesome brother very knowledgeable very useful tips! Keep the videos coming! GOD bless you and the family 🙏

[@22Webstar]

Damn, best auto painting video I have seen yet, keep it up bro, please! Thank you, did very well explaining that on a beginner level!

[@MOTIVATEDPAINTERS]

Haha thanks man! I appreciate it !

[@genesisomega369]

Press On Bro! Your ideas are great; really really helps.. GOD Bless. You got a fan here.. a friend from PHILIPPINES.

[@MOTIVATEDPAINTERS]

Thank you so much!!!!!👍🥰

[@mrdeelux8715]

Thanks for your videos Gabriel!! Keep em coming man 👊

[@MOTIVATEDPAINTERS]

Thanks brother !!

[@itsnunyabusiness4095]

great info gabe tyi agree i bought a sagola for primer

[@dekorokone]

Thanks again. I struggle with sealer with te20 in high temperatures.

[@allenmaxwell8279]

very good video/explanation for sealer thanks

[@MOTIVATEDPAINTERS]

Thanks you!

[@RingoKnight]

before I started I have my truck down to the bear metal now and wanted to make sure that Im suppose to use epoxy primer first then the sealer. Is this right? Thanks

[@MOTIVATEDPAINTERS]

Yes sir

[@markgillingham1826]

Thanks man great tips👍

[@bobcat3141]

Nice video Gabriel.. I wanna try spraye with the ls400 sealer.. would then have fluid all the way open..

[@kevintoepper2828]

Sure appreciate your videos just ordered a beanie and decal thank you for the free shipping and keep making us videos please

[@stevejanka361]

Good morning Gabriel, is that a sealer for waterborne basecoat, or solvent basecoat? Really flowed out nice. Your right, smooth surface, smooth basecoat, makes smooth clear. Thanks for another great video. Take care.

[@MOTIVATEDPAINTERS]

+Steve Janka doesn't matter you can out whatever you want on it 😊

[@jiwandhaliwal2120]

Does sealer determine the lightness or darkness of your basecoat? Like if I use light grey sealer or dark grey sealer will it make an effect on my basecoat darkness or lightness? I understand coverage is key but the tone of 1st coat basecoat..?

[@les1ed]

it totally matters

[@Val-mm5gd]

Ppg also claims and warranties that this sealer can be applied over factory e coat without sanding it, great video

[@zcenic05]

I would still sand the e-coat just to be sure you get good adhesion.

[@MOTIVATEDPAINTERS]

+Val yeah that's true. But have you seen some factory primer primer jobs? Barffff

[@ThurgoodJenkinz]

You should start dusting some sealer on the inside of door where the belt molding goes and the opposite side.

[@MrFireman164]

Good stuff ,sealer can help but if you lay it down like acorns, it won't be comfortable for your base ;)

[@MOTIVATEDPAINTERS]

+MrFireman164 haha 😊

[@patrickpeterman4890]

WHAT GRIT PAPER DO YOU FOLLOW UP WITH PRIOR TO SPRAYING THE BASE COATS ?? DO YOU WET SAND THE SEALER COAT?? GREAT VIDEO- YOU EXPLAINED IT VERY WELL; THANK YOU,PATRICK.P

[@MOTIVATEDPAINTERS]

600-800 either or but more 800. Also I don't sand the sealer unless I have to

[@patrickpeterman4890]

thank you for sharing your experience and also your advice; much appreciated,thanks PATRICK.P

[@MOTIVATEDPAINTERS]

Thank you!!!

[@arcorob]

Very very helpful !!! I am using Eastwoods epoxy primer as a sealer. Would you says its okay to use a 1.4 tip to get a finer finish ? I was using a 1.8 and I also use a 10% reducer...appreciate the tips and your proof in is the finish

[@MOTIVATEDPAINTERS]

Give it a go you might have to move slower but might get smoother finish

[@marceloocandidoo]

Gabriel please make more videos about masking and matting colorss

[@marshallpulham]

Haha I noticed your iwata is missing it’s air control valve knob just like mine is !!! “ when you think your done blowing keep on going “

[@MOTIVATEDPAINTERS]

+marshallpulham 😀😀

[@420sonni]

mine fell off to.screw disappeared.

[@samiflyktman3680]

And when you get a run to sealer... you pretty much wanna go to home and cry. 😋 Not saying that has happened to me... 😭

[@MOTIVATEDPAINTERS]

Yuuuppppp hahahahahahahahah

[@kevintoepper2828]

Thank you for your videos and all your efforts I'm fixing to start myself I was going to thin my DTM U-Pol primer and use that for my sealer do you recommend I do something else instead

[@MOTIVATEDPAINTERS]

I don't think you should do that. I would just use it as primer and sanded smooth no need for sealer 800grit should be good 🤙🏼

[@MrFireman164]

Best painter ever

[@marcelocastillo8393]

Keep making it! Thank you!

[@josafatortiz3882]

Question? How’s your setting on your gun? I have the same one. Amazing gun , I haven’t use it yet for sealer . And it does amazing they way you did it. Thanks a lot.

[@tyferguson564]

Question after u sand down fiberglass, do you recommend cleaning it with acetone before and after u do the body work?

[@MOTIVATEDPAINTERS]

In my opinion the cleaner the better

[@gerardohernandeznavarro7939]

Hi!! I have a question, can you apply color base (deltron solvent) over the ECS sealer? greetings!

[@zaidchalabi1599]

maybe show how much you mixing of these products to make that 5 oz sealer in the spray gun

[@MrMagee78]

Sealer also help for paint coverage. And most of the new sealers have etch primer built in so you can put it over larger areas of metal. but yea putting etch doesn't hurt also. Nice vid!

[@olcitv2518]

SORRY ,I,VE AN ASK TO YOU ,CAN WE UNTERSTAND IT SUCH . IT SEALER =PRIMER OR WHAT DIFFERENT.

[@Matthew8422]

Love your videos, thanks for your time

[@MOTIVATEDPAINTERS]

+W Matt thank you!!

[@michaelrepko704]

Good video im learning a lot from you ! thanks so much !

[@MOTIVATEDPAINTERS]

Awesome!!

[@Adanacon]

Why would a smooth primer not be considered a sealer?

[@sinbadssss]

God Bless You Brother!!!! In Jesus Christ I pray you progress forward!!!!! My name is Sinbad!!!!

[@haiderzaman8684]

Bro well done.. For this.. I am trying to respray my father's car. I am planning to sand it with 800 with interface pad. Do i need to apply sealer on a whole car because the oem paint it 15 years old. Like. If yes. What pressure. I have devilbiss basic gun. 1.3? Please help

[@MOTIVATEDPAINTERS]

What you need to know is that sealer won't fix anything if there is peeling paint or stone chips or anything like that you need to fix them before you paint the car you can primer the whole car so in order to fix all the chips and stuff. That gun will do fine for Sealer base and clear

[@haiderzaman8684]

Many many thanks Gabriel. May god bless you. Thanks for your prompt response. Best wishes for your business.

[@samsbogh9361]

What type of sandpaper/grit you use to sand factory primer?..or should I just use automotive scotch brite? Thanks and keep them great videos coming cause you are the best📚✌

[@MOTIVATEDPAINTERS]

600 if you are going to seal it and you should

[@2koolforyou88]

Can sealer be sanded if trash gets on it

[@MOTIVATEDPAINTERS]

Yes absolutely just give it some flash time like 10 mins

[@k0712s]

Can someone please post a link of the brand name of the sealer. Also, do you sprat it right of the can? do I still primer over the sealer and sand?

[@MOTIVATEDPAINTERS]

It's 3:1:1 here is the link ca.ppgrefinish.com/getdoc/89f065d5-fbb9-452c-843a-565e47ad1d5b/Envirobase-High-Performance.aspx ECS61A-Chromatic Sealer - White

[@keithgariepy5359]

Using a basecoat gun for sealer ?

[@MOTIVATEDPAINTERS]

Yup

[@zanaga1901]

So do you put primer on first before you put primer sealer on.

[@MOTIVATEDPAINTERS]

If you primer you don't need to seal. But in new parts you can just seal and paint

[@3n1fss]

Where can I get that door stand?

[@MOTIVATEDPAINTERS]

Innovative tools it's cakled

[@3sTrAmBoTiKo]

Great video and good explanation 👌🏼

[@MOTIVATEDPAINTERS]

Thank you!

[@Mocredible]

Quick question.. If your doing a repair and you create a burn through when sanding the base coat; making the substrate uneven .. Would you recommend using bondo and sanding it down, then using a guide coat, high build primer and then sealer before re-applying base coat? I keep getting halo’s and lines in my gray metallic paint. It’s driving me insane.

[@diamonddetails9445]

Use lower psi. On your gun, turn the material knob down. Narrow the fan, then LIGHTLY feather it into corrected areas. Works 100%💯👍

[@trancebass2741]

So this is basically wet on wet primer? We don’t use “sealer” in the uk but wet on wet primer does the same job ?

[@MOTIVATEDPAINTERS]

Basically but thinner

[@auzone819]

Omg. Always sealed with 391, didn 't even know 392 existed. My paint supplier didn 't even keep it in stock. But now that i tried it , wouldn t go back to 391. The finish is so much smoother, wow. Thanks for this awesome tip.

[@MOTIVATEDPAINTERS]

Man! Glad I can help!

[@blackjackenergy6784]

Just a quick question Can i use sealer then primer or a decent sealer works like a primer and i dont need to use primer?

[@pol-ek3yq]

So what if solvent pop happens on sealer? How can i get rid of them sanding with 320 dry? What is recommended? Because i know it can happen messing up is some thing that can happen weather its on primer , sealer , clear coat , base coat you name it.

[@MOTIVATEDPAINTERS]

I have never experienced solvent pop on sealer but I would say you need to sand it until is gone

[@pol-ek3yq]

@@MOTIVATEDPAINTERS thanks for the help

[@marshallallen72]

What kind of primer can be used as a sealer ?

[@JT-cm3ff]

Epoxy

[@les1ed]

what kind cant just check with your supplier and tds sheets

[@sparkywelder5893]

GOOD VID. MY GIRLFRIEND LOVES THE DANCE LOL..WOULD SEALERS BE NEEDED ON LIGHT COLORED MATALICS?

[@MOTIVATEDPAINTERS]

Hahhaa Thanks !! To be safe yes

[@algernumv]

Where do you get you paint coverall suit, special the gray one , sata, arnest iwata. Muy buena imformacion en tus videos. Gracias por tomar tu tiempo y compartir tus experiencias.

[@MOTIVATEDPAINTERS]

+algernumv I ask my distributors thanks man ,🤓🙂

[@slv_car_refinisher6864]

Great video bro... Bro I wanted to ask you something when you have your gun with your own set up. While applying sealer. Base or clear.. Do you press all the trigger down. Or you just play with the trigger not pressing it all the way down.

[@MOTIVATEDPAINTERS]

Yes trigger all the way down

[@kentma7516]

do you sand the sealer or not before putting basecoat? would be good to mention this, thanks

[@MOTIVATEDPAINTERS]

Nope if there is any big jobs I'll knock them down with some 800 but I don't isual sand sealer

[@zanaga1901]

What color primer sealer would you put on a vehicle that is midnight blue metallic and it is going to a daytona electric blue color because am painting my truck to a electric daytona blue metallic from a midnight metallic blue all I need is a primer because have the clear and base already I know will have to sand and put guide coat on before putting on the sealer though.

[@zanaga1901]

What color primer sealer for bright silver metallic do you use.

[@MOTIVATEDPAINTERS]

White of g5

[@RC.56]

I Thought you have to sand sealer prior to bass with 400? No? Still learning

[@MOTIVATEDPAINTERS]

Nope it's wet on wet

[@RC.56]

@@MOTIVATEDPAINTERS OK so I’m just prep sanding with 400 gt the Ecoat on OEM part…. So many Techniques I’m a bit lost. For Ecoat parts: Sand or scuff- wax remover- sealer-base -clear. No other sanding needed?

[@RC.56]

@@MOTIVATEDPAINTERS I’ve been gathering all the equipment to get this done, I’m now ready, but took forever to set up booth and proper air lines/ filters/fitting etc…I have 3 new guns, not sure witch to use for what… 2 Husky composite hvlp-$100 each, and a black widow compliant gun-$250. The CFM’s required are very different and did not notice until later. Husky needs 4.3 scfm, and the widow calls for 11 cfm!! will psi settings need to be different here? Only have a 30gal tank also, those extra cfms might be to much

[@jbkivontop]

what tip/needle size do you for sealers or primers?

[@MOTIVATEDPAINTERS]

1.3 for sealers 1.5 for primer s

[@Nperez1986]

Great video! I was on the fence about doing primer sealer, but I'm glad I bought it. My only mistake was I bought the "fast" hardener for the sealer (60-75F)...and not the medium (76-90F)...is this going to kill my texture so much where I can't flow coat it out in the end with the clear? (It's about 60F where I'm shooting right now)

[@MOTIVATEDPAINTERS]

+Nperez1986 I would suggest over reducing the sealer it will make it thinner. That is one option. You could paint it and then flow coat it if you want

[@Nperez1986]

Awesome, thanks for the uber fast response! It's my first full car paint job and I've been prepping for months now to make sure I have everything I need before I commence

[@MOTIVATEDPAINTERS]

+Nperez1986 awesome man ! I'm going to give you some advice. You will screw up eventually and that will not be the last time so don't let it ruin your day . Fix it and move on !

[@Nperez1986]

Thanks for the advice, I plan to learn as I mess up :)

[@johnnycash7803]

Can you apply sealer directly over a bondo patch? Or should I epoxy primer it first?

[@10feethighermaga12]

How much psi on that gun trigger squeezed all the way when spraying base coat and clear coat? Also your fan settings, how many turns clockwise from full open?

[@hamacbr3003]

Can you plz explain what do you mean by saying sealer as am not eng I dont really get it like I dont know is it a product or is it a part of the car.. And another question.can you ever apply a color over a wet clear coat then apply clear coat again and can you imagine what result you will get.. Thanks bro i enjoy your vids

[@MOTIVATEDPAINTERS]

Sealer is like primer but thinner and you can apply color without sanding. No you cannot out color on top of CLEAR

[@zanaga1901]

What size air hose you use I got a 3/8 air hose now and air is leaking out it a little. Gonna take it back and get a 50 foot 1/2 air hose.

[@schmidtw900]

Awesome info !! Ive been told that the Nason Epoxy Sealer Primer works for on bare metal panels !! Whats your thoughts about an all in one sealer primer ??

[@MOTIVATEDPAINTERS]

If the company says it and will back it up then run with it!

[@zcenic05]

Can't skimp out on a sealer gun. I use my lph-400 for it now. I tried the entech once but couldn't bring myself to use it for sealer after. I love it for base. You only spray one coat?

[@MOTIVATEDPAINTERS]

+Cel P yeah only one coat

[@jasongoldie9992]

Don't stop making videos, you are the best at explaining everything. @golden_refinish

[@MOTIVATEDPAINTERS]

+Jason Goldie thanks so much man!!! I will give it my best!

[@ravedave513]

Can you tint your sealer with the acrylic Paint Out of the mixing bank aswell?

[@MOTIVATEDPAINTERS]

+RAVE DAVE Nono not with ppg with axalta you can

[@MrMeticulousdetail]

Do they have different color sealers for different colors. So use less paint to get coverage?

[@MOTIVATEDPAINTERS]

+Matt Calay different shades of white grey black

[@khonavqary2372]

What size of the nozzle tip to paint sealer?

[@elihernandez330]

So I have a few questions. Could I use ppg gripper which says it's a primer sealer and it's an acrylic water based on metal and then apply oil based enamel paint on it. Thought about getting just regular oil based primer but would it be better to use a water based acrylic sealer. Or will oil based enamel not like water based acrylic even if fully cured.

[@MOTIVATEDPAINTERS]

I have to say I don't know the answer to that question 😣

[@brandonproctor1420]

Nice vid man, i always run a strip of sealer on both adjacent panels as well so where the door meets the rear door and fender color hits perfect cause itll have exact same amount of paint all the way threw. Just a tip i do nontheless great video keep it up!

[@garrettstokes2860]

I do the same

[@brandonproctor1420]

garrett stokes for sure man, then theres no way the color can be off lol. I paint everything i csn off the car unless its a tricoat etc just to be safe. Which ive done tons of them off the car too lol. Keep up the hard work guys our industry is dying !

[@MOTIVATEDPAINTERS]

+brandon proctor yup that's a very good thing to do!!!

[@brandonproctor1420]

MOTIVATED PAINTERS do you guys get a flat rate there or is it hourly? Here in detroit michigan i get a 17 flat rate commision, just curious what it is world wide!

[@garrettstokes2860]

brandon proctor flat rate here in st. George Utah

[@niritton]

great painter bro keep up that great work ! saludos desde salt lake city utah u.s.a

[@MOTIVATEDPAINTERS]

+Gilbert patino thanks so much man wow!!

[@mbulloch]

Any reason you use the ECS6x vs the ECS2x series? I find the 20series to be way nicer than the 60

[@MOTIVATEDPAINTERS]

+Michael Bullock honestly that's what was brought here when we switched haha and since I didn't know anything about ppg I didn't know there was anything else haha I'm going to ask about it, thanks man!!

[@zanaga1901]

So is one coat of sealer over primer good enough.

[@MOTIVATEDPAINTERS]

Yes

[@worthey1969]

I get over spray with sealer any way to prevent this from happening?

[@husky1239]

Hello new to your channal I will be using wet on wet or (sealer) I am getting confused between hb wet on wet and non hb wet on wet the 1 I have brought seems to be hb 6:1 ratio I just wanted to spray 1 thin coat by the way I am a first time user for wet on wet thank you fo the video

[@zanaga1901]

Do you use clearcoat sealer too and basecoat I never used sealer or paint blender.

[@MOTIVATEDPAINTERS]

Sealer is like primer I have never seen clear cost sealer

[@Dan-zx9ho]

I sprayed my sealer and it never hrdened. I mixed according to the tech sheet. But never got hard i didnt realize it and once the base and clear was on and dry i could get fingernail marks in the paint when it was hot but when it was cold (not in the sun) it was hard.... what did i do wrong? Im nervous to spray again that i will do the same thing and have to sand it all off again.

[@handyishrandyish334]

If I have a small sand threw to bare metal do I need to hit with etcher first then seal my whole panel or being it’s just a small cut threw will sealer be enough

[@MOTIVATEDPAINTERS]

Technically yes but if it's tiny I just seal it I have never had issues

[@handyishrandyish334]

@@MOTIVATEDPAINTERS iv always sealed them to but recently heard everyone’s throwing etch over I worry that etch might come threw and affect my sealer or base coat

[@handyishrandyish334]

@DrivewayAutoBody I did jambs a few days ago and just let etcher flash before base coat knock on wood but no issues yet!

[@ElGrigonEx]

do you use blender wet bed for sealer when you have a blending area?

[@MOTIVATEDPAINTERS]

If I apply sealer yes

[@velvetjade5252]

Hi what camera are you using on your head to film this please ? Thanks

[@ivanlebron2003]

Saludos Gabriel, pregunta cual tip 1.3 o 1.4 es el.mejor para pintar con pintura negra y para tirar clear coat...

[@MOTIVATEDPAINTERS]

1.3 para mi

[@ivanlebron2003]

Gabriel saludos , cuando vas hacer un video en español para esa gente que quiere aprender lo qué haces y solo hablan español...

[@bigbothoee8617]

How may coats do you use ? Single coat ?

[@seanpair1382]

What's your opinion on using global reducers in ECS, we have always used DT reducers but I always wondered if it sprayed any different? Awesome video man keep it up 👍🏻

[@MOTIVATEDPAINTERS]

+Sean Pair I have not used the dt reducers my friend so I wouldn't be able to tell you. I do like the ECS a lot specially the slower ones

[@MOTIVATEDPAINTERS]

+Sean Pair the only one I use it the one for sealer which is D8764

[@patrickpeterman4890]

DID YOU "TINT " THE SEALER OR MIX "BASE COAT INTO SEALER?? WHY IS IT WHITE; I REALIZE YOU MAY BE PAINTING THE CAR WHITE; DID THE SEALER COME IN THE WHITE COLOR?? SORRY TO BE A PAIN; PATRICK.P

[@MOTIVATEDPAINTERS]

It's white sealer 😊

[@patrickpeterman4890]

I just finished your video on; sealer and application of sealer; I realize now the sealer comes in white,/gray,&black; forgive my ignorance amigo!!;

[@dougg1075]

Can you use rattle can as a tinted pre coat. Like red rattle can before thin PPG copper to get better coverage.

[@MOTIVATEDPAINTERS]

No idea brother not tmsure if that's a thing

[@maybelletugade9650]

How can I get the blow gun fan. Thanks bro..

[@MOTIVATEDPAINTERS]

motivatedpainters.com/products/pre-order-motivated-painters-walcom-blower-60150

[@nicodemussantiago776]

Hi gabriel do you i see that your primer are already the same color as your seale do you used sealer as primer or do you order a special primer

[@MOTIVATEDPAINTERS]

If the work is light yes

[@Steveo17316]

What temp do you spray at? Iget sags sometimes when spraying white sealer using same hardner as you did but 885 reducer I spray at 85 degrees

[@MOTIVATEDPAINTERS]

+Steven VanVliet I sprayed at 75 just try moving a bit faster

[@dimitridam1249]

The sealer is white..normaly its transparent? Great class awesome..cuidate mucho.

[@MOTIVATEDPAINTERS]

+Dimitri Dam we have white, grey and dark dark grey and they can be mixed. One coat usually do it and your good to go

[@ThurgoodJenkinz]

You might be thinking of adhesion promoter for raw plastic. That is usually transparent or sometimes transparent with tiny metallics

[@dirkwichmann2225]

Chris i think he Think at translucent fillsealer for unsanded surfaces (cars CV) We normaly use wet on wet fillprimer for new parts ....

[@crazyforblues1967]

Hi what grit was the door sanded with, and did you scuff the jamb? Didn't look like it in the video. Good videos, thanks 👍

[@MOTIVATEDPAINTERS]

+andrew c it's sanded with 600. Inside the jamb PPG doesn't require to sand I know it was shocking to me when they told me haha

[@crazyforblues1967]

MOTIVATED PAINTERS thanks buddy. 👍

[@mrmuskey5202]

Depending on the Sealer you use, its not necessary to sand. It adheres very well. Although a light scuff with a scotch brite to check for imperfections is always good. Not sure why guys oversand and sand through all over the place, makes me crazy.

[@erichabursky8613]

So does sealer go on after primer or before primer

[@MOTIVATEDPAINTERS]

After but I don't necessarily put sealer over primer primer when sanded smooth enough there is no need to seal it

[@marcuswhite1403]

Gabriel. What's the best way to spray sealer on a hood? I can seem to get it to lay smooth on fenders, but can't seem to get it to lay smooth when I spray a hood. Using a Devillbiss starting line gun. I use that gun for base and now use a Tekna clearcoat gun for clear. You think i may need to spray sealer with my clearcoat gun?

[@les1ed]

you need a better base gun you are using a moped for base and a ferrari for clear