How to stain cabinet doors

I walk you through preparing and the full process of staining cabinet doors, along with some good tips. I'm using the Wagner Flexio 590 Paint Sprayer gun. I have another video for staining the boxes as well as installation and putting on hardware. Check out my KZbin channel for more DIY videos. I have every step of fully renovating this condo. Enjoy!

[@liorzummay2494]

Fast cap finishing clip instead of spraying the hinges. Also, you can spray only the top surface, then flip the panel while holding the edges, and then spray the edges and the top surface. Then wipe the complete door panel with both of your hands.

[@dpfitness100]

Dexter would be proud :)

[@marioc5932]

Lol Dexter would be proud!!

[@pashahaletskiy4520]

I really enjoy plans from woodprix.

[@stix562]

1: All hardware to hold it - means double the cleaning - not necessary - you could use 1 or 2 Screws and a wire - and not concern about cleaning hardware.. 1A: If you insist to use hardware - why both hinges - why not just one .. less cleaning ..save yourself 2: Wiping in multiple directions .. Bad.. wipe one direction - with the grain .. 3: Wagner Flex Sprayer - works when new - after that it goes down hill fast .. cleaning cleaning cleaning .. thoroughly and more cleaning ..I personally don't like them as I consider the things disposable sprayers .. 4: Spraying and stopping in the middle : Bad .. you should NEVER do this. One direction - full sweep and done .. unless you want splotches, runs etc.. 5: Enclosed keeping all fumes in the room you created .. no air ventilation - respirator mask is good as long as it has a good seal - however no ventilation and you will have a higher concentration of fumes .. better to vent ..

[@shantahsieh2877]

I made it by myself. I used woodprix woodworking plans for that.

[@vladkoshel6462]

All of my woodworks I am making with woodprix. Google and try it.