So I had took out the red fuse but my light didn’t not come on ?? Why is that ?
@wolvestv41657 жыл бұрын
I subscribed to your channel hopefully I can get my channel up and running to do mods to my 3.5 V6 Chrysler 300 I have a few mods I already did to it
@hot_steppa_lifestyle7 жыл бұрын
Thanks I'll try to do some more vids
@1SLOWSRT83 жыл бұрын
What exhaust setup ? I have a 2.7 v6 and did u put a drop springs or how is it so low ?
@hot_steppa_lifestyle3 жыл бұрын
The previous owner cut the springs, the exhaust was straight pipes after cats
@BINX-RR3 жыл бұрын
If that is fuse 17, I wouldn’t pull it. When I did the speedometer stopped working, autostick stopped working and of course abs stopped working. While it did disable traction control and I did a few drifts I noticed a strange smell from the engine. It’s my thinking that the fuse also does something to the gearbox or transmission and locks it in first gear. It might have also made the rev dial stop working too so you can easily fuck up your engine revving to high without knowing. This all fixes itself when you place the fuse back in but still it seems like it’s not worth it. For $50 you can buy a NoESP switch which completely turns traction control off when you hold the ESP traction control button for 5 seconds. Plus you get to keep your abs, speedometer, rev dial, autostick and biggest of all, you can change gears and not burn out your engine.
@hot_steppa_lifestyle3 жыл бұрын
Sick I'll look into it, just got another 300 with a hemi
@jakebowmen7643 жыл бұрын
@@hot_steppa_lifestyle what year i have a 2012 300 with a hemi and I can’t do donuts
@jameswilson99663 жыл бұрын
You can turn off your traction control with a key dance. Simple.
@hot_steppa_lifestyle3 жыл бұрын
I have a 2005
@300SharkBoy2 жыл бұрын
Does it do anything if you take out and then put back on later? Like would it reset or no?
@hot_steppa_lifestyle2 жыл бұрын
Mine was fine, as long as the car was off, it was fine
@stevengonzales22384 жыл бұрын
What's the number on the fuse
@zuckoliverzuck7 жыл бұрын
do I have to reflash when I put the fuse back in?
@hot_steppa_lifestyle7 жыл бұрын
That one guy sorry for the late reply, No you don't as long as your car was off when pulling and when putting it back in you'll be fine
@N54omar6 жыл бұрын
Exhaust setup?
@hot_steppa_lifestyle6 жыл бұрын
Omar Khan it only has the 2 cats into the factory Y pipe 2.5 all the way to the to a 3.5" tip
@gregbro43305 жыл бұрын
That sounds good af
@hot_steppa_lifestyle4 жыл бұрын
@@gregbro4330 thanks alot!
@jameswansing9126 жыл бұрын
What’s the exhaust
@hot_steppa_lifestyle6 жыл бұрын
It only had the 2 cats on then into the y pipe, then straight piped after that
@mattb76235 жыл бұрын
If you put the fuse back will they turn on?
@hot_steppa_lifestyle4 жыл бұрын
Yes they will, but make sure the car is off while putting it back in
@vidmantask.44006 жыл бұрын
Nice ride Nigga! :D
@stevengonzales22384 жыл бұрын
I dont see it on mine, and I have same car
@Platinumtag3 жыл бұрын
Just unplug the abs module , u will left with abs and brake light and no speed meter reading, bc abs sensor read speed, .....