Thought that after over 20 years of bass fishing, I would be exposed to almost all tips on tying knots. But using that Loon UV is great info that can be very useful. Thx Steve.
@indeeponthedeltawithstevec59979 ай бұрын
Thanks for watching Dave. There is so much knot tying info on the tube we all should be better knot tyers. practice is most important.
@michaelfaez94739 ай бұрын
Funny I used to use it a long time ago when I fly fished. I had forgotten all about it.
@indeeponthedeltawithstevec59979 ай бұрын
@@michaelfaez9473 I draw from my flyfishing past for a lot of my Bass fishing.
@pmill069 ай бұрын
Thank you for this knot video. I have been using the Albert knot for years but never as you have just shown us. But I am going to use this method going forward. I love learning new tips that make fishing more fun and interesting. Thanks again.
@indeeponthedeltawithstevec59979 ай бұрын
Thank you for watching pm. Tight lines in 2024.
@larrycarr65459 ай бұрын
The absolutely best Alberto knot on KZbin. Ya’ll, IMHO, don’t have look any further. The only thing I’d change, since I have arthritis, is I use a large finger trimmer instead of a razor blade. Thank You Thank You Thank You.
@indeeponthedeltawithstevec59979 ай бұрын
Thanks for watchg Larry, I got a few suggestions to drop the razor, May have to rethink that.
@toroblanco16379 ай бұрын
Great tip on the UV knot sense! Thanks Coop, tight lines!
@indeeponthedeltawithstevec59979 ай бұрын
Thank you for watching Toro.
@nateroo9 ай бұрын
Hey Steve, nice helpful vid. I use the Alberto knot exclusively and more so than the FG...easier to tie and just as slim through the line guides. Have never had an Alberto knot fail, but I recall doing a check on an FG knot and it slipped. Yeah, many will say it's user error and maybe so, but I've NEVER had a user error issue with Alberto knot. I've heard Al Fong mention use of the Alberto in many of his vids. Alberto and Albright....great knots!!
@indeeponthedeltawithstevec59979 ай бұрын
Thanks for watching Nate, I have problems with the FG when it comes to light leaders. Check out Salt Strong, they explain why the FG may not be the best way to go for litr line applications.
@af4od029 ай бұрын
Thats an excellent tutorial. The Alberto Knot has been my favorite braid to Fluorocarbon knot for years. I like the Loon UV cement. I am going to try it. Also the two 3/4 “ PVC pipes with Electric tape is an excellent idea. My wife is mad because i stole her cutting board in the kitchen.
@indeeponthedeltawithstevec59979 ай бұрын
Join the mad wife club, comes with fishing. Thanks for watching and commenting.
@dgroves853 ай бұрын
This is my go-to knot for all things connecting different lines. I have not heard of the product that you use in here. But I appreciate your instruction on tying this knot. I am pretty particular and detailed about my knots. But there was some good stuff in here. Thanks for sharing.
@indeeponthedeltawithstevec59973 ай бұрын
Thanks for watching.
@waynewalters58139 ай бұрын
Thanks for the detailed tutorial!
@indeeponthedeltawithstevec59979 ай бұрын
Thanks for watching Wayne-good luck.
@johnrhodes25725 ай бұрын
Great knot. Precision knot tying. Excellent explanation of knot mechanics. Albeit a bit impractical method for tying a leader flying across No Tellum Lake. In all seriousness folks, sit at home and practice your knots. If you can’t tie them at your desk, you’ll probably not be able to tie it on a moving boat. You’ll probably end up with three or four knots that will suit your needs. If one of your needs is being able to steer a boat while tying, just take that under consideration. Tight Lines!
@indeeponthedeltawithstevec59975 ай бұрын
Thanks John, good advice.
@kencroy28159 ай бұрын
Clear, detailed, and still interesting. Best instructional video I’ve seen. Growing up fly fishing I’ve applied Loon Knot Sense in the same way ever since I started bass fishing. Works great on the FG (thinner diameter knot) I tie at home and on your Crazy Alberto which is easier for me to tie in the field. Two things I hope might be helpful to some: If you have sticker shock on the Loon products , fear not. It’ll easily last you over a year. You don’t use much and it doesn’t dry out. Two, if you leave the hi viz braid tag 3/4” long it fuzzes up nicely when fishing That makes it a great indicator for your line watching, weightless techniques. It still flies right through the guides and works well with your white knot indicator trick. Great video!
@indeeponthedeltawithstevec59979 ай бұрын
I like the indicator idea for bass fishing applications. PS I have a leaky tube of the knot sense. The goop is pooled in a cup. Have used it for over a year. Just keep it from uv and it never hardens. Thanks for watching Ken.
@patrickmahoney34799 ай бұрын
Excellent video. The Alberto is favorite of mine. I learned something new today!
@indeeponthedeltawithstevec59979 ай бұрын
Thanks for watching Patrick, The Alberto is the one I always come back to.
@dougiemac84179 ай бұрын
Awesome knot!!! Excellent tutorial!! Thank you very much. 👍🏾
@indeeponthedeltawithstevec59979 ай бұрын
Thanks for watching D - good luck.
@TylerKTanaka5 ай бұрын
Great video. I am a huge fan of the Loon UV Knot Sense product. It’s the best way to finish hand tied FG/RP/Alberto knots IMO. I also like apply bowstring wax to all my wind-ons after using thin super glue on the bobbin serves. Works great over regular super glue as well if you don’t have Loon glue.
@indeeponthedeltawithstevec59975 ай бұрын
Thanks for the comment Tyler.
@KevinJohnson-ge5xs7 ай бұрын
I especially like the tip to use handles to pull the knot tight. I had a piece of 1/2 PVC in the garage that works great when taped up. My left little finger really appreciates the idea since it no longer gets "bit" by the mono/fluro.
@indeeponthedeltawithstevec59975 ай бұрын
They really help get a good cinch without cutting your hands.
@BillBuhlman9 ай бұрын
Thanks, Steve. Great video and thanks for the idea about the Loon product. It was nice talking with you at the Basshole swap meet last weekend.
@indeeponthedeltawithstevec59979 ай бұрын
Thanks for stopping by to say hello-goood luck in 2024.
@softballbryan9 ай бұрын
This is an example of an excellent knot, with excellent instruction, resulting in a beautiful and strong knot (I use this knot all the time)... but I will not put that kinda of time on a boat making it that nice... One helluva video though....
@indeeponthedeltawithstevec59979 ай бұрын
Thanks for the comment softball, go out and hook the big one-and don't wory about your knot.
@m.j.greathouse4569 ай бұрын
Two Cats one bass today. I have trouble trusting that knot. I will get the U.V. stuff and use it. I tried like heck to do the F.G. knot. Once I think I have it I test it….and it’s a free lure for a big fish. F.G. stands For F… it’s Gone ! I also tested the Alberto it breaks easy at the knot. I will try it the same way you did Coop. I like to have the clear line by my lure with a touch of stretch. Thank for the help Coop! The only time I have fished with that knot was the time you tied it on my rod. I felt like a little kid in Thea back of your boat Solid knot I caught fish on it Uncle Steve.
@indeeponthedeltawithstevec59979 ай бұрын
Thanks for the report MJ. Just got your latest PIc, nice.
@mikedefee9 ай бұрын
Very good video! I tie my Alberto the same way but had not heard of the Loon UV but you can clearly see this helps the knot especially through the guides. I use this know for slow pitch jigging splicing the braid to the flouro leader. Typically 30 lb braid to a 40 lb flouro leader. Thanks for the education!
@indeeponthedeltawithstevec59979 ай бұрын
I follow the same recipe for Bass 40 bl braid to 12 to 18 lb mono. Thanks for watching.
@TractorsNStuff7 ай бұрын
I keep two pieces of delron rods, 1/2in dia by 3in long, wrapped in electrical tape, in my boat just for snugging down knots. They fit will in the hands but don't take up room. The use of UV glue is brilliant! I've used super glue from time to time, but typically just trust my knots without. I bet this leader knot will last much longer with the glue. Thanks for making this!
@indeeponthedeltawithstevec59977 ай бұрын
Good idea with the pieces of rod.
@joshgrimes955418 күн бұрын
I'd definitely use this while rigging up initially , but out on the water on a cold windy day id still use the uni to uni because its way more doable.
@markphilippsjr9 ай бұрын
10 out of 10 on the instructional video! Avast, I'm an FG guy.
@indeeponthedeltawithstevec59979 ай бұрын
Thanks Mark, I have never got a 10. I've always been a C student.
@michaelfaez94739 ай бұрын
Love that knot.
@indeeponthedeltawithstevec59979 ай бұрын
It's my go to. Thanks for the comment.
@tonykemp46459 ай бұрын
It a good knot the ALBERTO knot you did a very good job showing this knot thank you
@indeeponthedeltawithstevec59979 ай бұрын
Thanks so much for watching and commenting tony. Good luck in 2024.
@russdennis70268 ай бұрын
This is my favorite connection knot. This just makes it better and still easier to tie than the FG knot.
@oneshoeless9 ай бұрын
I appreciate the information on tying this knot. I am very interested in the LOON UV knot sealer. While I try to tie my knots at home when I starting out, invariably I am out on the lake with 15-25 mile and hour winds in my kayak. Not a lot of room for other gear and my line is blowing all over the place. LOL. ;-)
@indeeponthedeltawithstevec59979 ай бұрын
Thanks for watching and I am with you 100%. I try and tie all my line to leader knots at home. I am fishing out of a boat so when I need to change rods due to knot or line problems, I just change rods. Hard to do in a kayak. If I am in a pinch and have to retie, I will retie a Alberto, with no Loon, It's a good knot, better with the Loon but still a good knot. If you have trouble tying the Alberto on the boat, tie a double uni knot no loon. When you get home reset everything in the comfort of your own living room. Were all fishing for fun, every now and then we have a knot break, won't really mater in 5 years. Have fun.
@rogerglasco59418 ай бұрын
Now that was great video. Great knot. I learned something. That is good.
@skiplovestofish69925 ай бұрын
Very nice system for tying that knot.
@indeeponthedeltawithstevec59975 ай бұрын
Thanks Skip, I appreciate your support.
@grhodes35369 ай бұрын
Wow nice tutorial.
@indeeponthedeltawithstevec59979 ай бұрын
Whats up G, been out. Was thinking I might see you at the Bass Hole tourney.
@toddbell12149 ай бұрын
Great tutorial 🤙
@indeeponthedeltawithstevec59979 ай бұрын
Thanks Todd. I appreciate your comment.
@wormway_69Ай бұрын
🎉🎉🎉🎉🎉 nice knot explained
@Dano79457 ай бұрын
For a more compact knot, the tag end is used to lock in and keep the loops inline. After the loops are seated the leader and braid are tightened.
@PoliceMods4 ай бұрын
Thank you
@stepitup54097 ай бұрын
excellent video and explanation
@indeeponthedeltawithstevec59977 ай бұрын
Thanks Srep, good luck.
@craigt60075 ай бұрын
Hi- would this knot be recommended to tie hollow core braided backing (20#dacron) to a fly fishing line? Thanks!
@indeeponthedeltawithstevec59975 ай бұрын
I have never tried that.This is called a fine grip knoe. It may damage the outer core of the fly line. so i would try it first and then test the break strength.
@skatelife20134 ай бұрын
Took a few great tips away from this video that will help improve my Alberto -- 1.) cutting the edges cleanly w/ a razor to create a ramp/transition to help the knot flow through guides easier and 2.) the use of the uv knot sense to encapsulate and finish off the knot. Thank you!
@indeeponthedeltawithstevec59974 ай бұрын
Thanks for the comments Skate, Keep your line tight and good luck.
@LastRODbender9 ай бұрын
Been doing this for 3 years. Finally upped my game by buying a UV flashlight.
@indeeponthedeltawithstevec59979 ай бұрын
Thanks for watching lastrod, keep that rod bent and don't wory about the knot.
@BarefootBeekeeper2 ай бұрын
But can I do this while up to my waist in surf? Probably not.
@indeeponthedeltawithstevec59972 ай бұрын
What's the wave length?
@Reload777256 ай бұрын
Freakin AWESOME!!! Thank you sir!
@michaelgraham73169 ай бұрын
Great video. What UV light are you using?
@indeeponthedeltawithstevec59979 ай бұрын
Just a standerd uv light from lowes.
@michaelgraham73169 ай бұрын
Thanks so much for the answer. I watch your reports every week. Keep doing your videos
@indeeponthedeltawithstevec59979 ай бұрын
Is this Michael Graham the crappie man?
@michaelgraham73169 ай бұрын
No sorry. I am Michael Graham the old bass fisherman. Haha@@indeeponthedeltawithstevec5997
@slyarsenal5 ай бұрын
Is the UV Knot Sense easily washable from the fingers? Does it leave your fingers sticky if not wiped or washed off?
@indeeponthedeltawithstevec59975 ай бұрын
just wipe it off. If the sun hits it when it's on your fingers good luck. I do 95% of my knots at home in doors and use uv. The knot will work great if tied with out the knot sense.
@slyarsenal5 ай бұрын
@@indeeponthedeltawithstevec5997 Thanks for the info. I actually ordered it as I slide-bait which involves throwing out heavy 8-10oz grapnel sinkers. The bimini twist into alberto knot as a shock leader on 80lb mono can be bulky going through the guides, even on my custom rod with bigger guides. UV knot sense seems like a great solution to my headaches and I should gain at least 20m extra on the cast. I just hope after application that the knot/line still remains as supple as people say
@hotfootproductions97839 ай бұрын
Cool! Have you tested the knot strength on a scale?
@indeeponthedeltawithstevec59979 ай бұрын
I have not, I wish I could just to check it. I will say that before I started using the loon UV knot I would have problems,from time to time with the knot. No longer have any problems, could be that I am better at tying the knot. Thanks for watching.
@iamatt7 ай бұрын
I think the crazy alberto knot is more forgiving with the thicker mono topshots (150-200) and braid (150-300)we use here. Uni knot is strong too. These have held up to 13+ hammers at 60lbs of drag. One line of my buddy had multiple unis. That's strong enough proof to me and use them all of the time.
@indeeponthedeltawithstevec59977 ай бұрын
@@iamatt You are right. The heaver the mono the better. The alberto knot is what is known as a fine grip knot. The braid must grip into the mono, so light leader to braid will loose some straight.
@wdh10689 ай бұрын
Jeesh, Steve, I thought I made a pretty good alberto knot! I guess knot. I'll be getting that knot sense and giving this a try. I've used superglue for encasing, but it doesn't work well.
@ButcherisFalse9 ай бұрын
Put the UV on top of your super glue .. I use the glue on last cinch, then UV drop on top for smoothness.. works like a charm and never a failure.. jerkbaits or big swimbaits.. no stretch for hooksets and some cushion from leader
@indeeponthedeltawithstevec59979 ай бұрын
Hi Bill. One advantade with the loon stuff is that it is softer than glue so if you have a long leader and it's on your reel, the knot does not tear up your thumb.
@Mightiflier7 ай бұрын
pent hours learning and practicing the FG knot. Good instruction, guess I'll have to learn the Alberto Knot too, just because it is there.
@TerrySprey5 ай бұрын
GREAT VIDEO NEW SUBCRIBER
@indeeponthedeltawithstevec59975 ай бұрын
Thanks Terry, keep in touch and don't be shy about sending in comments, I try to read them all and answer any questiond you may have.
@Philip-w2q9 ай бұрын
Have you tied a red Philip knot
@indeeponthedeltawithstevec59979 ай бұрын
I have not. Can I find this one on the net?
@robertavila48109 ай бұрын
Where do you get that product from?
@indeeponthedeltawithstevec59979 ай бұрын
Loon products are all over amazon or in any fly shop. TW also caries it. I will load a video on drop shot and share my knot sense hak, this stuff has many uses. Thanks for watching.
@MrSeminole774 ай бұрын
link to the glue?
@indeeponthedeltawithstevec59974 ай бұрын
I usually google loon knot sence and it comes up, All fly fishing shops carry it. If you have any trouble hit me up and I can find the link. The stuff last for a long time.
@razerginn9 ай бұрын
Please dont use a double sided razor, keep your fingers in tact for fishing. Use good sharp scissors
@indeeponthedeltawithstevec59979 ай бұрын
No one ever called me smart-thanks for the tip and thanks for watching.
@peterd68426 ай бұрын
@@indeeponthedeltawithstevec5997 Actually, a single edged razor blade is what you want. You're trying to get very close to the knot. Scissors will never do that quite as cleanly. Great tutorial!
@indeeponthedeltawithstevec59976 ай бұрын
Thanks Peter. I do like the single blade razor, a lot safer.
@pegasus6724Ай бұрын
Rourke denver
@Garminrules9 ай бұрын
I use a spring clothes pin or rubber coated binder clip to hold the loop and braid...my hands are so big just makes it easier....almost like 3rd hand.....theres a joke in there somewhere...??
@indeeponthedeltawithstevec59979 ай бұрын
First off, I get the joke. Thanks for the good tip, although I have small hands.
@mikeskouby21905 ай бұрын
the audio is distorted.
@iLearnt-IT-on-You-Tubes9 ай бұрын
When he said “magnifying glass ” I was out. Sadly I don’t catch monsters but luckily my double uni has never failed me on my dinks.
@indeeponthedeltawithstevec59979 ай бұрын
The double uni is a great knot, I also use my readers tying it, may have more to do with my eye sight .
@vk3act9 ай бұрын
Bloody HELL Man what are you fishing for? Too much trouble.
@indeeponthedeltawithstevec59979 ай бұрын
I guess everyone has there own threshold for detail, I guess this video found yours. Thanks for watching, thanks for the comment and you may like my next couple of videos. Quick and easy.
@Captdavis12 ай бұрын
What a joke. This knot has been around for a long time. Alberto put his name on it, and know calls it by his name. What BS. Any variation of an Albright is still called in some way an Albright. Look up Cosmo Albright. Look up locked Albright. Two knots that are a little different then the original, but still more or less called the same and certainly not some hacks name. This knot has been called an Mexican Albright for ever. What an ego to call it his name. Don't feed into his BS. Give Jimmy Albright the respect and claim on his knot. Don't let some hack who goes around and does shows get off by teaching people "his" knot.
@R-Lee-2 ай бұрын
Then how did Knie get all the credit? Wouldn't people have said that's Jimmy's knot, the "Mexican Albright?" I'm confused about all of this.
@stephenearly95509 ай бұрын
What a pain in the butt!
@indeeponthedeltawithstevec59979 ай бұрын
Still beats loosing fish. I usually do all my knot tying at home.Not so popular with my wife. On the water evrything is ready and all I do is a rod change. Thanks for watching.
@timwilliams6329 ай бұрын
Wait, I dropped my UV light off of the kayak! Just joking. Actually I learned a couple things watching this. Thanks for the video
@Garminrules9 ай бұрын
Not at all....Im 68 and and kinda struggled at first but use a clothes pin with spring as extra fingers and never has alberto failed me.
@stephenearly95509 ай бұрын
I’ll stick to using florcarbon
@Reload777256 ай бұрын
Huh? Why don't you show and tell how to do a better knot. We'll all wait....
@dunerinaz7 ай бұрын
Should've titled the video "how to over complicate the Alberto Knot". There's nothing in this video that makes the knot any better than a thousand other videos showing the knot.
@indeeponthedeltawithstevec59977 ай бұрын
Don't use the knot. Thanks for watching.
@Reload777256 ай бұрын
Guess YOU haven't watched too many videos and you obviously don't know how to tie an Alberto knot. What a clown.
@TylerKTanaka5 ай бұрын
Totally unnecessary comment. Using Loon UV Knot Sense glue to finish the knot (or any super glue really but especially the Loon brand because it is not brittle) on your PR, FG, RP (John Collins), Alberto, etc. knots makes them significantly better so that the tag end has much less chance of coming undone and unraveling as the knot hits and runs on the guides from repeated casting. Adding glue is often the difference between all day casting with a secure knot and having to re-tie mid-day due to the knot being weakened by the tag end becoming unsecured and failing.
@ButcherisFalse9 ай бұрын
I personally use FG knot.. finish it with a tiny bit of super glue on last cinch then a touch of the loon uv on top… Never, never had a failure… Alberto has failed on me, feels weaker compared to FG, and FG is thinner.. goes through smaller worm guides easier.. jmo after yrs and yrs of using this leader method for pretty much everything.. especially for jerkbait and swimbaits…great vid man… Loon UV is great stuff , tie up in the shade , use light or stick out in sun for a few seconds,also Daichi makes a fantastic tool for the FG knot.. makes it simple and quick.. actually tied up 4 rods today with new leaders, ready for springtime baby!!
@indeeponthedeltawithstevec59979 ай бұрын
Thanks for the imput car. Give the knot sense a try on the FG, you may like it. I also use the FG, but only on heavey mono leaders.