How to TIG Weld a 2” Schedule 40 Pipe in 6G

[@jamescarnation986]

Bro you are doing gods work! Haha keep it up dude!

[@bgoss5642]

What cup sizes are you using throughout the weld? How far out should the tungsten be? How many Amps for root,hot pass,fill and caps?

[@jeepwk6.5L]

On 2” I run 85 amps root then turn up to 100, a 5 cup for root and a 7 on cap. Easiest way to set up tungsten depth is just do your stick out half of cup size. But I don’t freehand so most guys that free hand run bigger cup with more stick out.

[@mattoiler9714]

I love using size 7 cup easier to see the tungsten

[@jahnielvlog4994]

Hows the roots inside. We did not see?

[@homerceballos4030]

I was told never to buff the fill before a cap cause you could lose the lines

[@44_83]

Who the f k told you that stupid sh t? After you fill, grind down any high spots and try to make it as flat and smooth as you can. Smoother and flatter your fill is, the easier your cap. As for "losing the lines," you make your own lines after the first cap. The top of it becomes your "line" and overlap it with your second cap. Then the top of your second cap becomes your line for the next cap and so on.

[@andrewsrainey4093]

Whats does the inside look like?

[@TheBeast-hd9bl]

100% flat no penetration it all

[@jeepwk6.5L]

@@TheBeast-hd9bl he didn’t show it did he lol? So that’s ur assumption?

[@santosgtz7011]

What do you mean walk it down into the bevel and walk it out can you show me

[@speedracer87]

How about a video of freehand 6g 2" sch40 tube?

[@Digitalnomad2000]

When your being tested for a job will they want you to walk the cup or free hand ?

[@Kiwicousin]

Do whatever you can do to make it prettiest

[@ramonbrooks7098]

That’s all your preference

[@jeepwk6.5L]

Don’t be a boilermaker

[@Digitalnomad2000]

@@jeepwk6.5L why?

[@jeepwk6.5L]

@@Digitalnomad2000 haha just kidding. Boilermakers always free hand

[@flaco1936]

At what amps for root and what amps for hot, fill, and cap? Awesome video thanks

[@Kiwicousin]

Whatever you’re comfortable with if you’re slower low amps if you’re faster higher amps also depends on gap landing sch of pipe and thickness of wire

[@leahfinn5336]

I use 118 amp root and 115 amp cap once cool with 2.4 mm wire and 2.4 mm gap

[@TheoldRoss4]

Breathing heavy

[@ttpp7797]

How thr gap size?

[@flingitoutdoors1898]

Can’t use your off hand??

[@christopherpatrick2343]

Great

[@TundraCamburg]

Do they measure your heavy breathing

[@jahnielvlog4994]

We cant see your roots inside the pipe

[@ravikoralagamage307]

👍👍

[@juanvelazquez5604]

Do more vids like this plssssssss

[@mattvorlicek9976]

Go and get that big money lol

[@Ryanryan-sd9yw]

That's why you stay away from Tulsa

[@yomommasgardener9648]

It’s not a bad school I’m going there I’m learning a lot

[@dementedpaintballer]

@@yomommasgardener9648 Hopefully not from this guy. This school puts out so many who cannot pass a test outside of their classroom environment.

[@yomommasgardener9648]

@@dementedpaintballer I went to Tulsa

[@dementedpaintballer]

@@yomommasgardener9648 my condolences.

[@yomommasgardener9648]

@@dementedpaintballer huh

[@ssampson572]

As an instructor, I figure you'd run your left hand like you did on your right,so you ain't fighting that body position. Or adjust that welding stand.

[@draperwd86]

Whoa we got a badass over here...

[@kalebjacobs8056]

Aren’t you supposed to not adjust your welding stand when you are taking a weld test for a job?

[@ssampson572]

Adjust it to where u like it and finish the test at that adjustment..

[@jeepwk6.5L]

@@kalebjacobs8056 correct, once ur tacks get inspected and they mark top on the coupon then you are locked in. Can not move any part of the test

[@kanodelosreyes5995]

First

[@tofreshboy3]

This guy is a joke.

[@blake8120]

Damn lol

[@44_83]

@@blake8120 14:50 "Nice pretty bead" joker says on some ugly ass cap.

[@KhanKhan-sx4ve]

Very nice this video soport #khanbiharguru